• 한국농공학회지
• /
• 제38권3호
• /
• pp.101-110
• /
• 1996

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated clayey soil and to confirm the application of the model. To this end a series of suction controlled isotropic and triaxial compression tests are conducted on clayey soils. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. Total volume change, air and water volume changes are measured by the device made for the experiment. The specimens are compacted by dynamic compaction using a half of Proctor compaction energy with the water contents of 5% drier than the optimum moisture contents. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. And the application of the model to clayey soils is confirmed by the comparison between test and predicted results. During drying-wetting and loading-unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. And predicted deviator stresses are well agreed with the test results in shearing process, but volumetric strain is not well agreed with the test results in high suctions.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.49-54
• /
• 2005

Measuring defects on the inside and on the surface of a steel structure is very important technology in order to predict the life span of the structure. In particular, a place with a high probability that it may contain defects is a welded part and it is very important to check defects in the part, absence/presence of non-uniform substances, its shape, and the location. Many non-destructive tests can be applied, but the ultrasonic flow detection test is widely used with some advantages. The ultrasonic flow detection test, however, cannot be applied when there is a problem by a contact medium between PZT and a specimen, in case of a small and complicated shape or a moving object or when the specimen is hot. In this study, to solve the problems of the contact ultrasonic flow detection test, the non-contact ultrasonic flow detection test for sending/receiving ultrasonic waves using lasers was described. I intended to develop a non-destructive detection system applying the laser application ultrasonic test to a steel structure by detecting the defects inside of and on the surface of the specimen.

• 한국안전학회지
• /
• 제33권6호
• /
• pp.50-57
• /
• 2018

The purpose of this study is to evaluate the practical application of the self consolidating concrete for the steel concrete pannel (SCP) in module LNG storage tank proposed in the previous research. We evaluated the physical properties and filling performance of developed concrete for the SCP module. First, a slump flow test was conducted to evaluate the performance of the proposed guidelines for the filling test. As a result, all of the concrete used showed satisfactory performance. Based on the results of the previous study, it was found that the reliability of the required time measured by the $T_{500}$ test and the rheometer results measured before and after pumping was 0.94 which means the separation and blocking should not occur. The L-box test and the U-box test were conducted before and after pumping. All of the guidelines suggested showed satisfactory performance. SCP module for LNG storage tanks was fabricated on actual size scale to evaluate the practical application at the final site. As a result, it was confirmed that satisfactory filling performance was obtained in all the specimens.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.49-55
• /
• 2021

In this paper, an application example for fitness-for-service of material is shown. A kind of instrument valve is made of austenitic stainless steel fabricated by the cold working process. The tensile strength of the cold worked austenitic stainless steel has to be limited under 90 ksi to prevent the stress corrosion cracking in power plants. In industrial fields, tensile strengths of some materials were discovered to be over the regulation requirements in a certified material test report (CMTR). Owner's verification tests were performed to compare with that in a CMTR and to check the appropriateness. It is found that, in the case of verification test under the required test speed, valve materials could be used in the field. Although it is only one application sample of material check process in the power generation site, this case study could show an importance of basic experimental technology in academia and research circles.

• Journal of Information Technology Applications and Management
• /
• 제18권4호
• /
• pp.183-202
• /
• 2011

Since smart phones are changing the media for communication and its related mobile market, it is imperative to attract more application developers for success in application store business in order to attract more app users. By using aspects of the commitment marketing theory and the relationship marketing theory, this research study identified factors that influence on the relational commitment of application developers to the market. Survey of application developers from Korean mobile application developers' community was conducted to test the hypothesized model. The empirical results showed from an economic behavioral perspective market demand for applications and perceived usefulness of development tool led to relational commitment of developers mediated by perceived satisfaction while attractiveness of alternatives had no significant effect. In addition, fairness of review process and interactivity, based on the relationship marketing theory perspective, showed significant effect on the relational commitment of developers mediated by trust for application market.

• International Journal of Advanced Culture Technology
• /
• 제10권1호
• /
• pp.17-23
• /
• 2022

The purpose of this study is to develop a cancer rehabilitation program for cancer survivors in the form of a smartphone application and to confirm the effectiveness through Pilot study. The contents of the application consisted of health records, lab-test records, and health information, and the information recorded by the patient was graphically checked for changes over time on my page. 7 subjects who ended acute treatment and were undergoing follow-up were asked to use the application for 4 weeks, and then changes in variables (uncertainty, e-health literacy, self-efficacy, and cancer rehabilitation) were confirmed. It was confirmed that e-health literacy and self-efficiency increased significantly over time after using the application. In addition, the level of cancer rehabilitation was found to increase significantly over time. The application for cancer rehabilitation developed in this study needs to be expanded to improve the quality of life of cancer survivors.

• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.473-483
• /
• 2015

본 논문에서는 1축 자세제어실험 장비를 제작하여 쿼드로터 형 무인항공기에 적용할 단일입력-단일출력 Cascade 제어기 실험을 수행하였다. 해당 장비는 두 개의 모터와 프로펠러에 의해 자세변화가 가능한 시소 형태로 구현하였고, 무게 추를 변경하여 회전축을 중심으로 상하 무게중심 이동이 가능하도록 제작하였다. 개발한 장비를 통해 Cascade 구조를 가지는 PID(각도)-PID(각속도) 제어기를 구성하여 실험을 수행하였으며, PID 이득의 조정을 용이하게 하는 SIMC 제어기 이득 조정 기법을 Cascade 제어에 접목하였다. 이를 위해 Matlab-Simulink 환경 하에 2차 시간 지연 모델을 구축하여 시스템 변수 추정을 수행하였다. 기존의 SIMC 조정 기법 적용 과정을 수행하여 그 특성을 파악하고, 적용 과정의 안정성 문제를 고려하여 수정된 방안을 제시하였으며, 이를 1축 자세제어실험 장비에 적용하여 기존의 과정과 수정된 과정을 비교 실험하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.486-487
• /
• 2006

The authors have studied on the application of IEC 60364-4-44 to Korean electrical installations of buildings from 2004 sponsored by Korean ministry of commerce, industry and energy and the test field is established in K.E.R.I. (Korea Electrotechnology Research Institute). This paper presents the summary results of establishment of test field and analysis for the application of IEC 60364 in Korea. IEC 60364-4-44 provides rules for the protection against the effects of conducted and radiated disturbances on electrical installations. Especially this standard deals with the protection of low voltage facility against the ground fault in the high voltage side of power distribution system. Many countries define the regulations on the use and production of electrical facilities based on their own power system and technical references which are considered to be suitable for them. The background of circuit of IEC 60364-4-44 is based on the ungrounded system as most of European countries. However, since Korean electric power distribution system is based on multi-grounding system different from European system, it is necessary to evaluate or prove the effect of the IEC 60364-4-44 for introducing and applying it to the domestic grounding system as a Korean standard. This paper presents the establishment of test field to get background data to introduce the IEC 60364-4-44 and to evaluate the standard is applicable to domestic rule for the protection against ground fault through the related test

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.65-71
• /
• 2005

At present, Electronic industries push ahead to eliminate the Pb(Lead) -a hazardous material-from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C\;-\;+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• 국제물리치료학회지
• /
• 제2권1호
• /
• pp.193-200
• /
• 2011

This study is intended to examine the tDCS and Montoya stair task(MST) on sensorimotor recovery and glial scar expression in MCAo induced stroke model of rat. To achieve this goal, this study selected 80 SD rats of 8 weeks. The experiment groups were divided them into four groups, and assigned 20 rats to each group. Group I was a experimental control group; GroupII was a tDCS application group after MCAo; Group III was a MST application group after MCAo; Group IV was a tDCS and MST application group after MCAo. In each group, neurological function test measurement, motor behavior test, montoya stair task test, immunohistochemistric finding of GFAP expression finding were analyzed. In motor behavior test, the outcome of group I was significantly difference than the other group, especially from 14days. In montoya stair task test, the outcome of group I was significantly lower than the other group especially, group II were significantly different on 14days and group IV was most significantly difference than the other group. In immunohistochemistric finding, group II, III, IV were decrease GFAP expression on depend on time stream. These results throughout the MCAo due to focal ischemic brain injury rat model four weeks tDCS and MST was applied, when the neurobehavioural, upper extremity function and ability, histopathologic data suggest that sensorimotor function recovery and a positive influence on glial scar decrease and confirmed that.