• 제목/요약/키워드: Application S/W

검색결과 1,382건 처리시간 0.026초

입법기관의 보안강화를 위한 네트워크 분석 및 보안 시스템 연구 (A Study on Network Analysis and Security System for Enhanced Security of Legislative Authority)

  • 남원희;박대우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.467-470
    • /
    • 2011
  • 최근 7.7 DDoS 사건과 해킹 사건 등으로 국가기관의 정보보호에 관한 중요성이 대두되고 있고, 정보보호 관련 법률이 국회에서 논의되고 있다. 하지만 국회사무처의 정보보호컨설팅 결과 61.2점으로 매우 낮게 평가 되었으며, H/W, S/W분야의 평가에서도 보안성이 취약한 것으로 나타났다. 본 논문은 입법지원 기관인 국회사무처의 인터넷 네트워크와 사용 시스템 등에 대한 관리적, 기술적, 물리적 보안 요소에 대한 현황을 기밀성, 가용성, 무결성 등의 보안기준에 따라 파악하고, 이를 분석한다. 그리고 입법지원 기관이 갖추어야 할 인터넷 네트워크와 사용 시스템 등에 대한 보안 강화를 위한 설계를 연구한다. 본 연구를 통해 입법지원기관의 보안 현황을 분석하고, 사회적인 책임기관으로서 역할과 보안 강화를 위한 자료를 제공하고자 한다.

  • PDF

Al계 준결정 분말의 제조 및 응용

  • Kim, W. T.;Kim, D.H.;Lee, S.M.;E.Fleury;H.S. Ahn
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2002년도 제3회 최신 분말제품 응용기술 Workshop
    • /
    • pp.133-155
    • /
    • 2002
  • 1. Quasicrystalline powders shows exotic physical and mechanical p properties 2. Applications: structural application: strengthening particles for composites C Coating application: wear resistance, low friction coefficient 3. For thermal spaying: material loss during process should be c considered to control chemical composition of deposit 4. Friction coefficient is strongly dependent on contact geometry F Friction coefficient from pin on plate: 0.1-0.2 Friction coe야icient from flat on plate: about 0.46. 5. Quasicrystalline materials show lower friction coefficient but higher w wear rate than corresponding values of $Cr_20_3$ coated layer. 6. Amorphous coating seems to be promising

  • PDF

고장물리와 수명분석을 이용한 제품신뢰도 개선: BGA(Ball Grid Array) 패키지에 대한 사례연구를 중심으로 (An Approach of Combining Failure Physics and Lifetime Analysis for Product Reliability Improvement: An Application to BGA(Ball Grid Array) Package)

  • 이경택;신창호;한형상;;김선욱;이희진
    • 대한산업공학회지
    • /
    • 제25권2호
    • /
    • pp.204-216
    • /
    • 1999
  • Failure physics and statistical lifetime analysis constitute the two extreme ends of the reliability engineering spectrum, and studies that relate failure mechanisms to failure distributions have been near non-existent. This paper is an attempt to stimulate interest to fill the gap between the two extremes and proposes an approach of combining them through i) developing a failure mechanism model, ii) generating failure times by Monte Carlo simulation with the model, iii) deriving the failure time distribution and evaluating the product reliability, and iv) improving the product reliability by the sensitivity analysis. An application of the proposed approach to the BGA(Ball Grid Array) surface mount package is also provided.

  • PDF

HVDC 송전용 광구동 사이리스터(LTT)를 위한 소자특성 및 응용의 요구 (Device Feature and Application Status for Light Triggering Thyristor(LTT) in HVDC Transmission)

  • 장창리;김상철;김은동;서길수;김형우;방욱;청콴유;김남균
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.397-400
    • /
    • 2004
  • The design concept for 8kV light triggering thyristor(LTT) with integrated BOD was discussed here in detail. The trade-off between light triggering input source againsthigh dV/dt limitation has been treated via grooved P-base for gate design. The main application point used for high voltage DC transmission(HVDC) was represented.

  • PDF

CMMI의 정량적 프로젝트 관리에 기반한 S/W 개발 프로세스 개선에 관한 연구 (A Study on S/W Development Process Improvement based on CMMI's Quantitative Project Management)

  • 이돈희;오재곤;김정준
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권3호
    • /
    • pp.101-110
    • /
    • 2018
  • 최근 소프트웨어 개발시 CMMI 수준에 관한 인증 여부는 조직 경쟁력의 핵심적인 요인으로 그 중요성이 지속적으로 강조되고 있다. 따라서, 소프트웨어 개발시 CMMI에 기반한 프로세스 개선 활동을 활발하게 적용하고 있는 추세이다. 본 논문에서는 정량적 프로세스 관리 단계인 CMMI Level 4에 기반한 프로세스 개선활동을 목표로 하고 있으며, 이를 위한 조직구성이나 프로세스의 적용방법에 대한 내용을 실제 개발시 실적용을 통해 연구한 방법을 제시하고 있다. 이로써 기준만 제시하고 있는 모델에 대한 실제 적용 방법을 쉽게 이해 할 수 있게 하였다. 또한, 정성적 프로젝트 관리가 아닌 정량적 프로젝트 관리에 따른 그 개선 효과를 나타내고자 일정/공수 분석, 동료검토활동을 통한 결함관리의 적용 사례분석을 수행하였다. 끝으로 실제 적용에 따른 문제점과 개선방향도 제시하였다. 본 연구 결과는 CMMI에서 언급하고 있는 정량적 프로세스 관리의 효과부분을 검증하는데 도움이 될 수 있으며, 향후 CMMI에 기반한 프로세스 개선을 도입 예정인 조직에 유용하게 활용될 수 있을 것으로 기대한다.

저소비전력 PDP 구동을 위한 고효율 박형 전원회로 개발 (A Low-Profile DC-To-DC Converter for Sustain Driving Circuits of AC PDP Application Systems)

  • 이상원;최병조;이기조
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.247-250
    • /
    • 2003
  • The current paper presents the design and implementation of a low-profile dc-to-dc converter developed as a power supply for the sustain driving: circuit inside large-area wall-mount ac PDP application systems. Details on the design and implementation of a 500 W prototype dc-to-dc converter, miniaturized within a 230 mm$\times$ 130 mm area with a thickness of 25 mm while still achieving a 95 $\%$ conversion efficiency, are presented to demonstrate the feasibility and application potentials of the proposed low-profile dc -to-dc converters.

  • PDF

수종의 단일병 접착제의 적용 시간 연장이 건조 상아질의 미세인장 결합강도에 미치는 영향 (EFFECT OF INCREASING APPLICATION TIME OF SINGLE BOTTLE ADHESIVES TO MICROTENSILE BOND STRENGTH OF DRIED DENTIN)

  • 김학근;김동준;황윤찬;오원만;황인남
    • Restorative Dentistry and Endodontics
    • /
    • 제30권6호
    • /
    • pp.435-441
    • /
    • 2005
  • 본 연구는 친수성 용매가 함유되어 있는 3종의 단일병 접착제의 적용 시간을 증가시켰을 때, 건조 상아질에 대한 재습윤의 효과가 있는지를 미세인장 결합강도의 측정을 통해 알아보고자 시행하였다. 실험대상은 최근에 발거한 상하악의 대구치로, 교합면 1/3부위의 치질을 치아 장축에 수직으로 절단하여 상아질을 노출시킨 후, $32\%$인산 (Unietch, Bisco Inc., Schaumburg, IL, USA)으로 15초간 산부식 하고 수세하였다. 치아는 무작위로 S군 (Single Bond), O군 (One-Step), P군 (Prime & Bond NT)으로 분류하였고, 각 군은 다시 3군 (W: 상아질 표면의 남아있는 과잉의 물을 수분에 적신 거즈를 이용하여 제거한 후, 즉시 단일병 접착제를 적용하고 광중합, D : 30초간 건조 한 후 즉시 단일병 접착제를 적용하고 광중합, 30: 30초간 건조 한 후 단일병 접착제를 30초간 적용하고 광중합)으로 소 분류하였다. 접착제 도포 후, 복합레진을 축조하고 접착계면이 $1mm^2$가 되도록 절단하여 각 군당 20개의 표본을 사용하여 미세인장 결합강도를 측정하였다. 5군,0군의 30초 적용군 (S-30, O-30)은 건조군 (S-D, O-D)보다 높은 미세인장 결합강도를 보였으며, S-30군의 경우 S-D군보다 통계학적으로 유의성 있게 높았다 (P<0.05). 하지만, P군의 30초 적용군 (P-30)은 건조군 (P-D)에 비해 미세인장 결합강도가 통계학적으로 유의성 있게 감소하였다 (P<0.05).

3 kW 계통연계형 태양광 발전시스템의 설계 및 실증운전특성 분석 (Design and Characteristics Analysis of a 3 kW Grid-connected Photovoltaic Power Generation System)

  • 황인호;정승주;안교상;임희천
    • 태양에너지
    • /
    • 제18권1호
    • /
    • pp.19-25
    • /
    • 1998
  • This paper describes a design method and characteristics analysis of the 3 kW grid-connected photovoltaic power generation system to establish the basic application technology of photovoltaic systems. The design specification of a 3 kW photovoltaic power generation system including a DC/AC inverter is suggested to investigate the system performance for grid connection. The results of the demonstration test from February to October show that the system with utilization rate up to 17% has reliable operation characteristics and is useful for peak-shaving of utility power.

  • PDF

추파용 호밀에 대한 액상분뇨 시비 연구 I. 생육특성 및 사초수량에 미치는 영향 (Studoes on the Slurry-Application of Winter Rye (Secale cereale L. ) I. Agronomic charateristics , yield and nutritive value of winter rye)

  • 신동은;김동암;신재순;서성;김원호;김정갑;육완방;정재록
    • 한국초지조사료학회지
    • /
    • 제18권3호
    • /
    • pp.235-242
    • /
    • 1998
  • This experiment was carried out to determine agronomic characteristics, nutritive value and yield (DM, CP) of Winter Rye as affected by different slurry application on the basis of N contents respectively and was arranged as a randomized complete block design with seven treatments (chemical fertilizer 160kg Nha, cattle sluny 160 . 320 480kg Nha, swine slurry 160 . 320 480kg Nha) and conducted at National Livestock Research Institute, RDA, in Suweon 6om Sep. 1996. to Apr. 1997. The results obtained are summarized as follows : Plant height and leaf length was influenced by slurry application, was orderly ranked cattle sluny 480kg N1 ha > chemical fertilizer 160kg Nha > swine slurry 480kg Nha. Tiller number was increased with cattle slurry application, especilly, the effect of cattle slurry 480kg Nha was obvious but plot of swine slurry tended not to be regular. Crude protein content of rye increased as slurry application level was increased (p< 0.05), but not significant difference was found ADF and NDF content of rye. RFV(Re1ative Feed Value) of rye as affected by slurry application was classified as Grade 2 in all treatments at harvest, according to the forage quality standard assigned by AFGC. Dry matter yield was shown fiom 4,006 kgha to 8,037 kgha as affected by cattle slurry application, in the case of swine slurry application was shown ffom 4,594 kgha to 6,230 kgha (p< 0.05).

  • PDF

디스플레이 디자인에 있어서 설치미술의 공간적 요소의 응용에 관한 연구 (A Study on the Application of Installation Art's Spatial Feature to Display Design)

  • 이승우;정유나
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
    • /
    • pp.132-137
    • /
    • 2005
  • Installation art(I.A.), which has appeared since 1940s against the loss of human nature and hackneyed art caused by materialism, is in pursuit of contact with audience and various artistic experiments. Many features of I.A. - to try contact with audience, to do experiments connecting different genres of art, to regard time and nature as elements of art and to use high technology - could give good ideas for contemporary display(S.W.D.) design. This study is a basic work to suggest new S.W.D. design through artistic principles of I.A.. First, I.A. and S.W.D. design were studied theoretically. Next, spatial expressions were extracted from I.A. and the case study was proceeded to seek the co-relationship of spatial expressions and display design. For a case of Shiseido, it could be evaluated very high because it adapted spatial expressions of I.A. successively. The S.W.D design could be more effective presentation when it has close contact with audience and various experimetal and artistic ways of Installation art.

  • PDF