• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.307-314
• /
• 2020

In this paper, studies on application cases of machine condition monitoring using oil sensors are reviewed. Owing to rapid industrial advancements, maintenance strategies play a crucial role in reducing the cost of downtime and improving system reliability. Consequently, machine condition monitoring plays an important role in maintaining operation stability and extending the period of usage for various machines. Machine condition monitoring through oil analysis is an effective method for assessing a machine's condition and providing early warnings regarding a machine's breakdown or failure. Among the three prevalent methods, the online analysis method is predominantly employed because this method incorporates oil sensors in real-time and has several advantages (such as prevention of human errors). Wear debris sensors are widely employed for implementing machine condition monitoring through oil sensors. Furthermore, various types of oil sensors are used in different machines and systems. Integrated oil sensors that can measure various oil attributes by incorporating a single sensor are becoming popular. By monitoring wear debris, machine condition monitoring using oil sensors is implemented for engines, automotive transmission, tanks, armored vehicles, and construction equipment. Additionally, such monitoring systems are incorporated in aircrafts such as passenger airplanes, fighter airplanes, and helicopters. Such monitoring systems are also employed in chemical plants and power plants for managing overall safety. Furthermore, widespread application of oil condition diagnosis requires the development of diagnostic programs.

• 한국자원식물학회지
• /
• 제11권1호
• /
• pp.86-92
• /
• 1998

The photosynthetic rate (LPS)in the field was higher in the non-shading condition than in the shading. The fertilizer application was somewhat higher than non-fertilizer application. After humus application at 50% sading condition the growth and LPS increased with Ligularia fischeri. The maximum LPS at 80% shading was 22.3${\mu}{\textrm}{m}$mol/m/s with N-fertilizer application . Except Aster tataricus and Solidago virge-aurea. var. asiatic where the maximum LPS at non-shading and N-fertilizer application were 38.68 and 35.28${\mu}{\textrm}{m}$mol/m2/s. While the maximum LPS of Aster scaber was 30.01${\mu}{\textrm}{m}$mol/$m^2$/s at non-shading and non-fertilizer application. the growth rate was higher shading and fertilized conditions than non-shading and non-fertilized . The most effective shading condition was 50% , but leaf ration was highest in the 80% . But a. tataricus was favorable at non-shading and N-feritlized conditions.

• 한국작물학회지
• /
• 제49권3호
• /
• pp.194-198
• /
• 2004

본 연구는 남서해안 간척지에서 토양 염농도(저염; 0.1%, 중염; 0.3∼0.4%)별로 쌀 품질 향상을 위한 적정 질소 시비량을 구명하기 위하여 시험한 결과를 요약하면 다음과 같다. 1.유추분화기의 초장은 질소 시비량이 많을수록 컸고, 토양염농도간에는 저염 토양에서 켰다. 2. 출수기는 저염 토양에서는 표준비인 N20kg/10a에 비해 N8-N16kg/10a까지는 같았으나 N24kg/10a에서는 1일 늦었고, 중염 토양에서는 N8-N16kg/10a 까지는 1일이 삘랐고 N24kg/10a에서는 같았으며, 토양 염농도간에는 저염 토양에서보다 중염 토양에서 4일 정도 늦었다. 3. 질소시비량이 많을수록 간장이 크고, 포장도복이 심했다. 4. 저염 토양에서 질소시비량이 많을수록 $\textrm{m}^2$ 당 립수는 많았으나 등숙비율이 낮아져 발 수량은 N12kg/10a이상에서는 유의차가 없었으며, N12kg/10a이하에서 현미의 완전미율이 높고 단백질 함량이 낮았다. 5.중염 토양에서는 질소시비량이 많을수록 $\textrm{m}^2$ 당 립수가 많고 등숙비율이 비슷하여 발 수량은 질소시비량이 많을수록 높았으나 N20kg/10a 이상에서는 유의차가 없었고, 현미의 완전미율과 단백질함량은 질소시비량간에 비슷하였다. 따라서 남서해안 간척지에서 쌀 수량 및 미질 등을 고려해 볼 때, 저염 토양에서는 N12kg/10a, 중염 토양에서는 N20kg/10a이 적당할 것으로 생각된다

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.1006-1013
• /
• 1988

We have shown how unstructured modeling was used to derive a general stability condition in Part 1. In Part 2, we focus on the particular dynamics (structures modeling) of the robot manipulator and environment. Using rigid body dynamics, the stability condition for the direct drive robots has been achieved in terms of the Jacobian and robot tracking controller. Combining the structured and unstructured modeling, a stability condition for a particular application can be obtained. This approach has been used to analyze compliant motion on the University of Minnesota robot using a feedforward torque controller. We have obtained a stability condition for this application. Through both simulation and experiment, the sufficiency of this condition has been demonstrated. For a sufficient stability condition, recall that if the condition is satisfied, then the stability is guaranteed; however, if the condition is violated, no conclusion can be made.

• 대한전기학회논문지
• /
• 제38권11호
• /
• pp.950-957
• /
• 1989

We have shown how unstructured modeling was used to derive a general stability condition in Part 1. In Part 2, we focus on the particular dynamics (structured modiling) of the robot manipulator and environment. Using rigid body dynamics, the stability condition for the direct drive robots has been achieved in terms of the Jacobian and robot tracking controller. Combining the structured and unstructured modeling, a stability condition for a particular application can be obtained. This approach has been used to analyze compliant motion on the University of Minnesota robot using a feedforward torque controller. We have obtained a stability condition for this application. Through both simulation and experiment, the sufficiency of this condition has been demonstrated. For a sufficient stability condition, recall that if the condition is satified, then the stability is guaranteed` however, if the condition is violated, no conclusion can be made.

• 대한한방내과학회지
• /
• 제35권1호
• /
• pp.59-69
• /
• 2014

Objectives : This study was designed to test the effect of heating condition and Panax ginseng on body temperature, hematologicala changes, and immune response. Methods : The extract from Panax ginseng was made by the pharmacy department of Kyung Hee Oriental Medical Hospital. The animals were divided into four groups; control, room temperature Panax ginseng (G), $28^{\circ}C$ heating, and $28^{\circ}C$ heating Panax ginseng (heating G). Each group has 8 Sprague-Dawley rats. We measured body weight & temperature twice a week. After 2 weeks of experiment, serum lipid level, WBC, differential count, lymphocyte proliferation and immune cytokine concentration were measured. Results : 1. Simultaneous application of heating condition and Panax ginseng induced decreased body weight and increased body temperature. 2. Simultaneous application of heating condition and Panax ginseng induced decreased AST, ALT and BUN. 3. Simultaneous application of heating condition and Panax ginseng tended to decrease TNF-${\alpha}$ concentration, while application of room temperature and Panax ginseng tended to increase TNF-${\alpha}$ concentration. Conclusions : Simultaneous application of heating condition and Panax ginseng decreseas body weight, increases, body temperature and has a tendency to decrease TNF-${\alpha}$ concentration.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.555-568
• /
• 2018

광산에서 효율적이고 안전한 운반 작업을 수행하기 위해서는 덤프트럭이 이동하는 비포장도로의 상태를 정기적으로 점검하고, 그 결과에 따라 체계적인 유지보수를 시행해야 한다. 본 연구에서는 광산의 비포장도로 상태를 주기적으로 조사하는데 사용될 수 있는 스마트폰 애플리케이션을 개발하였다. 개발된 애플리케이션을 사용하면 미국 육군 공병대에서 개발한 Unsurfaced Road Condition Index(URCI) 평가 체계에 따라 필요한 정보를 현장에서 쉽게 수집하고, 비포장도로의 상태를 정량적으로 평가할 수 있다. 부산 일광광산 비포장도로 일부 구간의 조사를 위해 개발된 애플리케이션을 적용하였다. 그 결과 URCI 평가 체계에서 고려되는 7가지 인자들을 사용자 인터페이스 화면을 통해 손쉽게 조사하고, 현장에서 URCI 값을 빠르게 계산하여 비포장도로의 상태를 평가할 수 있었다. 본 연구에서 개발한 스마트폰 애플리케이션은 광산현장의 비포장도로의 상태 조사 및 평가를 위해 유용하게 활용될 수 있을 것이다.

• 한국토양비료학회지
• /
• 제45권6호
• /
• pp.1043-1048
• /
• 2012

돈분액비의 시용법이 벼재배시 토양과 생육에 미치는 영향을 비교하고자 미사질양토 논에서 각각의 시용법에 따라 돈분액비를 논토양에 시용하여 토양의 이화학적 특성과 벼 생육 및 수량을 조사하였다. 사용된 돈분액비의 유효성분 함량은 질소 0.44%, 인산 0.07%, 가리 0.14%였으며, 벼 표준시비량에 준하여 10a당 6.8톤을 기비와 추비로 나누어 시비하였다. 액비 시비 후 토양의 이화학성은 처리구간에 큰 차이가 없었다. 질소 함량은 관수혼입 추비구에서 다소 높았으나 균일성이 떨어지고 혼입부에 벼의 도장이 발생하였다. 액비 시비 후 경시적인 암모니아 가스발생은 살포량이 많을수록 높았으며 살포 당일에 가장 높았고, 써레질 후에는 거의 발생하지 않았다. 벼의 수량은 담수 기비구보다 건답 기비구에서 증수되었으나 처리구간에 큰 차이는 없었으며, 제트분무 추비구에서는 유수형성기에 과도한 질소공급으로 영양생장을 지속하여 등숙율이 약 20% 저하되었고 식물체에 물리적 피해도 나타났다. 가장 적은 수확량을 보인 담수 기비+제트분무 추비구와 비교하여 건답 기비+관수혼입 추비구에서 9.6% 증수되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.213-217
• /
• 2008

This paper describes an application of centrifugal compressor optimization system, in which the blade profile of impeller is represented with NURBS(Non-Uniform Rational B-Spline) curve. A commercial CFD(Computational Fluid Dynamics) program named NUMECA fine/turbo was used to evaluate the performance of the whole centrifugal compressor flow passage including impeller and diffuser. The whole optimization design system was integrated based on iSIGHT, a commercial integration and optimization software, which provides a direct application of some optimization algorithms. To insure the practicability of optimization, the performance of centrifugal compressor under all condition was concerned during the optimizing process. That means a compositive object function considering the aerodynamic efficiency, pressure ratio and mass flow rate under different work condition was applied by using different weight number for different conditions. Using the optimization method described in this paper, an optimized design of the impeller blade of centrifugal compressor was obtained. Comparing to the original design, optimized design has a better performance not only under the design work condition, but also the off-design work condition including near stall and near choke condition.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.27-34
• /
• 2018

Concrete placed under hot weather condition suffers from larger slump loss, rapid moisture evaporation due to high air temperature. Proper measures for material, transportation and curing should be taken to prevent the quality deterioration of the concrete under hot weather condition. In Korea, Although the period of hot weather concrete in Korea occupies only 2 months, there are a lot of quality problems including plastic, drying shrinkage and cold joint. Therefore, the objective of this paper is to investigate and compare the temperature history and crack occurrence of the concrete, which was placed in the actual apartment house construction field under hot weather condition, in response to the application of surface covered curing blankets including PE film, single layer clear bubble sheet, white colored bubble sheet and aluminum metalized bubble sheet. Test results indicated that the application of white colored bubble sheet and aluminum metalized bubble sheet showed most favorable results in terms of reduction in temperature rise and crack occurrence as well as easiness in handling. But, due to light reflection by aluminum metalized bubble sheet, it is believed that white colored bubble sheet is preferable.