• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.15-25
• /
• 2023

In this study, silicon sludge from semiconductor dicing process is recycled to fabricate silica nanoparticles, which are applied as dispersing materials for electro-responsive (ER) smart fluid. In specific, metal impurities are removed from silicon sludge by acid washing to obtain the high-purity silicon powder. And then, silica nanoparticles are synthesized by facile hydrothermal method employing the silicon powder as reactant material. To control the size of silica nanoparticles, the reaction time of hydrothermal method is varied as 8, 15, 20, and 30 hours are applied to control the size of silica nanoparticles. Sizes of silica nanoparticles are increased proportionally to the reaction time owing to the increased numbers of hydrolysis and condensation reactions. As-synthesized silica nanoparticles are prepared as electro-responsive smart fluids by dispersing into silicon oil. Silica nanoparticles synthesized by 30 hours of hydrothermal reaction (SiO₂-H30) exhibit the highest shear stress of 21.4 Pa under an applied electric field strength of 3.0kV mm^-1. Such enhancement in ER performance of SiO₂-H30 among various silica nanoparticles are attribute to the reinforcing effect originated from the mixed particle size, which allowing the formation of rigid chain-like structures. Accordingly, this study successfully propose a recycling method of silicon sludge to synthesize silica nanoparticles and their derived ER fluids, which may suggest new possibility to ESG management emphasizing the eco-friendliness.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.369-375
• /
• 2019

This study looked at the effects of teratainment taping and footpad exercise on the improvement of flat foot in a university student. We divided it into flexible flat foot taping group(n=13), flexible flat foot exercise group(n=14), rigid flat foot taping group(n=12), rigid flat foot exercise group(n=13) through a navicular drop test. After one hour's application of teratainment taping and footpad exercise, the height change of navicular, balancing ability and postural stability were evaluated. Change in the height of the navicular was measured before and after intervention, and the balancing ability was measured timed up & go test, and the postural stability ability was evaluated for stability limits in shoulder-width double leg stance, narrow base double leg stance, tandem stance. According to result, there was a statistically significant difference in the left and right foot of the flexible tapping group, right foot of the flexible tapping group, right foot of the rigid tapping group in the change in the height of the navicular in comparison pre- and post- intervention(p<0.5). There were no statistically significant differences in pre- and post- intervention comparisons intragroup and intergroup in balancing ability. There was a statistically significant difference in flexible flat foot exercise group and rigid flat foot taping group in tandem stance in comparison pre- and postintervention in the postural stability(p<0.5). And there was a statistically significant difference in tendem stance of the flexible flat foot exercise group compared to the rigid flat foot exercise group(p<0.5). The results of this study show that teratainment taping and footpad exercise have a significant effect on the improvement of flat foot in adults. Therefore, it is recommended to apply teratainment taping and footpad exercise to improve flat foot.

• Journal of the Daesoon Academy of Sciences
• /
• v.28
• /
• pp.103-131
• /
• 2017

As the establishment of self-identity is based on 'Relationships of Mutual Beneficence,' the formation of 'Relationships of Mutual Beneficence' is the only road to the security and confirmation of self-existence. But given that our ordinary life almost entirely consists of actions objectifying others, the formation of 'Relationships of Mutual Beneficence' is by no means easy. The formation of 'Relationships of Mutual Beneficence' should be based on morality, controlling self-desire, and not objectifying others. Philosophy based on a priori reasoning describes self-control over selfdesire as the domination of the body through a priori reasoning. But this practical philosophy cannot present a self-evidential internal motivation behind moral actions. Due to this, the application of moral order given by a priori reasoning in response to reality is likely to be reinterpreted on basis of self-interest. With regards to this, the 'propensity towards sympathy' is given as new moral norm. The 'propensity towards sympathy' as emotion is direct and consistent given that feeling occurs prior to thinking. The 'propensity towards sympathy' is intuitive in the sense that it is an instinctual response preceeding a reasoned judgment. The 'propensity towards sympathy,' as a natural moral emotion, is self-validating given that all human beings know it and practice it. But previous studies on the 'propensity towards sympathy' have an obvious limitation because they adopt phenomenological approaches to the 'propensity towards sympathy' which eschew the investigation of morality. Though they present the 'propensity towards sympathy' as a natural emotion based on body rather than reason, they do not philosophically explain the 'propensity towards sympathy.' Thus the 'propensity towards sympathy' as a natural moral emotion is likely to be interpreted as a subjective and relative moral norm. This paper philosophically explains that the 'propensity towards sympathy' is a universal moral norm on the basis of Merleau-Ponty's 'flesh.' 'Flesh' is formed as the entanglement between oneself and others and presents the 'propensity towards sympathy' as its philosophical basis. In other words, 'flesh' formed as the mixture or entanglement between oneself and others is the material foundation upon which one can activate the 'propensity towards sympathy.' This paper's approach to the 'propensity of sympathy' can be desribed as a phenomenological approach to the 'propensity towards sympathy' as a universal moral norm.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.79-94
• /
• 2009

The research project was conducted to develop a paper bagging machine for grape. This technology was aimed to highly reduce a labor for paper bagging in grape and bakery. In agriculture labor and farm population has rapidly decreased since 1980 in Korea so there was so limit in labor. In particular there is highly population in women and old age at rural area and thus labor cost is so high. Therefore a labor saving technology in agricultural sector might be needed to be replaced these old age with mechanical and labor saving tool in agriculture. The following was summarized of the research results for development of a paper bagging machine for grape. 1. Development of a new paper bagging machine for grape - This machine was designed by CATIA VI2/AUTO CAD2000 programme. - A paper bagging machine was mechanically binded a paper bag of grape which should be light and small size. This machine would be designed for women and old age with convenience during bagging work at the field site. - This machine was manufactured with total weight of less than 350g. - An overage bagging operation was more than 99% at the actual field process. - A paper bagging machine was designed with cartridge type which would be easily operated between rows and grape branches under field condition. - The type of cartridge pin was designed as a C-ring type with the length of 500mm which was good for bagging both grape and bakery. - In particular this machine was developed to easily operated among vines of the grape trees. 2. Field trials of a paper bagging machine in grape - There was high in grape quality as compared to the untreated control at the application of paper bagging machine. - The efficiency of paper bagging machine was 102% which was alternative tool for the conventional. - The roll pin of paper bagging machine was good with 5.3cm in terms of bagging precision. - There was no in grape quality between the paper bagging machine and the conventional method. - Disease infection and grape break was not in difference both treatments.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.36-44
• /
• 2023

Environmental DNA (eDNA) can exist in both intracellular and extracellular forms in natural ecosystems. When targeting harmful cyanobacteria, extracellular eDNA indicates the presence of traces of cyanobacteria, while intracellular eDNA indicates the potential for cyanobacteria to occur. However, identifying the "actual" potential for harmful cyanobacteria to occur is difficult using the existing sediment eDNA analysis method, which uses silica beads and cannot distinguish between these two forms of eDNA. This study analyzes the applicability of a density gradient centrifugation method (Ludox method) that can selectively analyze intracellular eDNA in sediment to overcome the limitations of conventional sediment eDNA analysis. PCR was used to amplify the extracted eDNA based on the two different methods, and the relative amount of gene amplification was compared using electrophoresis and Image J application. While the conventional bead beating method uses sediment as it is to extract eDNA, it is unknown whether the mic gene amplified from eDNA exists in the cyanobacterial cell or only outside of the cell. However, since the Ludox method concentrates the intracellular eDNA of the sediment through filtration and density gradient, only the mic gene present in the cyanobacteria cells could be amplified. Furthermore, the bead beating method can analyze up to 1 g of sediment at a time, whereas the Ludox method can analyze 5 g to 30 g at a time. This gram of sediments makes it possible to search for even a small amount of mic gene that cannot be searched by conventional bead beating method. In this study, the Ludox method secured sufficient intracellular gene concentration and clearly distinguished intracellular and extracellular eDNA, enabling more accurate and detailed potential analysis. By using the Ludox method for environmental RNA expression and next-generation sequencing (NGS) of harmful cyanobacteria in the sediment, it will be possible to analyze the potential more realistically.

• Journal of the Daesoon Academy of Sciences
• /
• v.41
• /
• pp.133-178
• /
• 2022

This study investigates if four propitious sites (四明堂, sa myeongdang) identified in Daesoon Jinrihoe's The Canonical Scripture correspond with the orthodox descriptions of dragon, energy hub, sand, and water (龍穴砂水, yong hyeol sa su) which are held by Fengshui as conditions necessary for that specific designation. In this study, these conditions, based on the shape of the site-formations, were observed via through on-site surveys and the application of the theories presented by traditional books on Fengshui. First, the dragon veins (龍脈, yongmaek) of the energy hub of the Five Immortals Playing Baduk (五仙圍碁穴 oseonwigi- hyeol) on Mount Hoemun in Sunchang consists of solid soil, is like a spiderweb, rises and lays prone, winds in every direction, and looks almost disconnected while actually remaining connected. Second, the Fengshui characteristics of the energy hub of Worship Held by Buddhist Monks from Abroad (胡僧禮佛穴, hoseungyebul- hyeol) on Mount Seungdal in Muan is that the branching feet (枝脚 jigak) support the mountain range by forming a valley to the left and right of the dragon veins that stretch from the peak of Mount Seungdal. Also, the direction-changing helm (橈棹 yodo) supports the mountain range solidly can be said to be well-developed. It is likewise noted that there is an excellent change in dragon veins in that exhibit curvature that spans being high, low, rising, and lying. This makes it appear as though the dragon is wriggling back and forth. Third, the state of the energy hub of Celestial Maidens Weaving Silk (仙女織錦穴, seonnyojikgeum-hyeol) on Sonryong Ridge in Jangseong County demonstrates overall harmony between mountain and water as it is near Mount Ju and Mount An and has a solid water outlet to which it is tightly fastened such that its energy does not leak out. Meanwhile, the positioning of its blue dragon of the east, red phoenix of the south, white tiger of the west, and black tortoise of the north is so intimate that its long flow can be said to be spinning. The Songryong Ridge area where energy hub was formed between soil and bedrock is the right land for a great favored location as it corresponds with Fengshui logic in an exemplary manner. Fourth, the Fengshui characteristics of the energy hub of Subjects Receiving the Imperial Command (群臣奉詔穴, gunshinbongjo-hyeol) at Baerye-jeon Field in Taein can be described as embracing the village snuggly as it centers around Mount Wangja, and its blue dragon and white tiger respond to each other. Additionally, a clear distinction between host and guest is noticeable in the positions of Mount Ju and Mount An. The flowing body of water in front of the village wraps around that village as a Horizontal Water Formation (橫水局, hoengsuguk), and vigorous vapor from the earth draws breath as the yin-yang energy of the landscape courses through the earth. As dragon veins, the range of the mountain, are like the blood vessels within the human body and the dragon is compared to the limbs, the energy hub of Subjects Receiving the Imperial Command at Baerye-jeon Field in Taein can be identified as a favored location that was formed directly by the sky and earth.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1251-1260
• /
• 2022

Recently, due to the deterioration of watermains and the detachment of scale which is accumulated on the watermain surface, water quality accidents in a water supply network occur frequently. As scale accumulated on watermains is stabilized, it may not cause water quality accidents under the normal operating condition. However, due to water hammer or transient flow caused by the abrupt velocity and/or direction of flow change, it can be detached from the watermain surface resulting in water quality accidents. To prevent these kinds of water quality accidents, it is required to remove scale by watermain cleaning regularly. Many researches about flushing which is the most popular water cleaning method are focused on the desirable velocity criteria and the cleaning condition to accomplish the effect of flushing whereas less amount of research effort is given to develop a method to consider whether the desirable velocity for flushing can be obtained before flushing is performed. During flushing, the major and minor headloss is occurred when flushing water flows through a hydrant or drain valve. These headloss may slow down the velocity of flushing water so that it can reduce the flushing effect. Thus, in this study, we suggest a method to simulate the flow velocity of flushing water using "MinorLoss Coefficient" and "Emitter Coefficient" in EPANET. The suggested method is applied to a sample network and the water supply network of "A" city in Korea to compare the flushing effect between "flushing through a hydrant" and "flushing through a drain valve". In case of "flushing through a hydrant", if the hydraulic condition ocurring from a watermain pipe connecting to the inlet pipe of a hydrant to the outlet of a hydrant is not considered, the actual flowrate and velocity of a flow is less than the simulated flowrate and velocity of a flow. In case of "flushing through a drain valve", the flushing velocity and flowrate can be easily simulated and the difference between the simulated and the actual velocity and flowrate is not significant. Also, "flushing through a drain valve" is very effective to flushing a long-length pipe section because of its efficiency to obtain the flushing velocity. However, the number and location of a drain valve is limited compared to a hydrant so that "flushing through a drain valve" has a limited application in the field. For this reason, the engineer should consider various field conditions to come up with a proper flushing plan.

• Clean Technology
• /
• v.29 no.1
• /
• pp.10-21
• /
• 2023

Hydrogels that are made of natural polymer-based double networks have excellent biocompatibility, low cytotoxicity, and high water content, assuring that the material has the properties required for a variety of biomedical applications. However, hydrogels also have limitations due to their relatively weak mechanical properties. In this study, hydrogels based on an alginate di-aldehyde (ADA) and gelatin (Gel) double network that is reinforced with additional hydrogen bonds formed between the hydroxyl (-OH) groups of the hyperbranched polymer (HPG) and the functional groups present inside of the hydrogels were successfully synthesized. The enhanced mechanical properties of these synthesized hydrogels were evaluated by varying the amount of HPG added during the hydrogel synthesis from 0 to 25%. In addition, magnetite nanoparticles (Fe₃O₄ NPs) were synthesized within the hydrogels and the structures and the magnetic properties of the hydrogels were also characterized. The hydrogels that contained 15% HPG and Fe₃O₄ NPs exhibited superparamagnetic behaviors with a saturation magnetization value of 3.8 emu g^-1. These particular hydrogels also had strengthened mechanical properties with a maximum compressive stress of 1.1 MPa at a strain of 67.4%. Magnetic hydrogels made with natural polymer-based double networks provide improved mechanical properties and have a significant potential for drug delivery and biomaterial application.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.