• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.15-25
• /
• 2007

본 연구는 RFID를 활용하여 교통정보를 수집 및 제공하기 위해 RFID 방식에 적합한 링크통행시간 추정 기법 개발 및 교통정보 수집체계로서의 적용가능성 평가를 목적으로 하였다. 이를 위해 기존 교통정보 수집 방식을 검토하여 RFID 수집 체계와의 차이점 및 특성을 파악한 후 교통정보생성구간 설정 및 통행시간 추정 기법을 개발하였으며, 현재 교통정보 수집을 위해 많이 이용되고 있는 GPS 방식과 비교분석하여 적용가능성을 평가하였다. 교통정보생성구간은 마스터 리더기를 기반으로 구축하였으나 실제 링크가 너무 길 경우 교통정보생성구간과 차이가 발생하여 이를 해결하기 위해 판단 로직을 추가하였다. 제주 시범사업지역의 조사 자료를 기반으로 통행시간 추정 기법에 대한 정확도 분석 결과 평균 88% 정도의 정확도를 보이는 것으로 나타났으며, GPS 방식(93%)과 비교할 때 거의 차이가 없는 것으로 나타났다. 또한 t검정으로 분석한 결과 p-value가 0.68로 통행시간의 차이가 통계적으로 없다고 나타났다. 이러한 결과로 볼 때 RFID 방식을 새로운 교통정보 수집체계로 적용가능한 것으로 사료된다.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.100-111
• /
• 2006

This study was carried out to increase the efficiency of site investigation through the evaluation of the applicable methods of investigation for cutting slope design. In an effort to find out the applicability of the method employed during the slope investigation, some tests were carried out on 6 subjects i.e location of weak zones, characteristics of discontinuities, distribution of strata, in situ tests for geo-technical properties, laboratory test and estimation of weathering. The method was highly applicable and produced expected results during the test of weak zones, discontinuities and distribution of strata. In order to apply the method to in- situ test for geo-technical properties and laboratory test on soil and rock slope, a statistic analysis of the existing data were required in advance. However its design applicability on rock slope was good although actual cases of application were not many due to limitation of the cases for investigation. The method was frequently referenced but not actually applied for anti seismic design test and estimation of weathering.

• 수산해양기술연구
• /
• 제32권2호
• /
• pp.132-147
• /
• 1996

The optimal design of floating type fisheries facilities in the open sea is demanded considering with the severe hydrodynamic forces on floating body, mooring tension and holding force of anchor. For conserving the facilities in most effective state, design and selection of anchor system is one of the most important fundamental subject. To enhance the design procedure of anchor system the holding forces of anchor are investigated by the hydraulic model test and are compared with the typical conventional results for various anchors. Applicability of previous estimation methods of holding force are checked and holding mechanism of anchor is discussed. Using the results a new computational concept of holding force is suggested considering mainly the effects of passive soil pressure (resistance), steady soil pressure, and surface friction etc. The new estimation method is proved as a feasible one by comparing the results of hydraulic model experiments. Applicability of various anchors to the anchor system on open sea fisheries structures is comprehensively reviewed using the present model tests and previous study results in the viewpoint of economy, construction and stability etc. Using the results, fundamental anchoring system design procedures are suggested to apply huge marine ranching complex with increase of the holding capacity of anchor under the optimum cost.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.87-97
• /
• 2020

In this study, the applicability of the geostatistical evolution strategy as an inverse analysis method of estimating hydraulic properties of small-scale basin was tested. The geostatistical evolution strategy is a type of data assimilation method that can effectively estimate aquifer hydraulic conductivity by combining a global optimization model of the evolution strategy and a local optimization model of the ensemble Kalman filtering. In the applicability test, the geometry, hydraulic boundary conditions, and the distribution of groundwater monitoring wells of Hanlim-Eup were employed. On the other hand, a synthetic hydraulic conductivity distribution was generated and used as the reference property for ease of estimation quality assessment. In the estimations, two different cases were tested where, in Case I, both groundwater levels and hydraulic conductivity measurements were assumed to be available, and only the groundwater levels were available, in Case II. In both cases, the reference and estimated hydraulic conductivity fields were found to show reasonable similarity, even though the prior information for estimation was not accurate. The ability to estimate hydraulic conductivity without accurate prior information suggests that this method can be used effectively to estimate mathematical properties in real-world cases, many of which little prior information is available for the aquifer conditions.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.1-11
• /
• 2014

In the initial design stage, the technology for estimating and managing the weight of a floating offshore structure, such as a FPSO (Floating, Production, Storage, and Off-loading unit) and an offshore wind turbine, has a close relationship with the basic performance and the price of the structure. In this study, using the genetic programming (GP), being used a lot in the approximate estimating model and etc., the weight estimation model of the floating offshore structure was studied. For this purpose, various data for estimating the weight of the floating offshore structure were collected through the literature survey, and then the genetic programming method for developing the weight estimation model was studied and implemented. Finally, to examine the applicability of the developed model, it was applied to examples of the weight estimation of a FPSO topsides and an offshore wind turbine. As a result, it was shown that the developed model can be applied the weight estimation process of the floating offshore structure at the early design stage.

• 대한건축학회논문집:구조계
• /
• 제36권5호
• /
• pp.165-176
• /
• 2020

The purpose of this study is to develop a estimation method of energy consumption by end-use in office buildings. For this, the current status of information on building energy use was investigated, and the domestic and foreign literature on the classification of energy use in non-residential buildings and the estimation method of energy use were reviewed. In addition, the characteristics of energy consumption by end-use were analyzed with measurement data of 48 office buildings in Seoul. As results, the annual and monthly estimation method of energy consumption by end-use in office buildings using public and measurement data was presented, and the applicability of the estimation method was examined by applying to sample office buildings.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.183-183
• /
• 2020

Accurate quantitative precipitation estimation plays an important role in hydrological modelling and prediction. Instantaneous quantitative precipitation estimation (QPE) by utilizing the weather radar data is a great applicability for operational hydrology in a catchment. Previously, regression technique performed between reflectivity (Z) and rain intensity (R) is used commonly to obtain radar QPEs. A novel, recent approaching method which might be applied in hydrological area for QPE is Long Short-Term Memory (LSTM) Networks. LSTM networks is a development and evolution of Recurrent Neuron Networks (RNNs) method that overcomes the limited memory capacity of RNNs and allows learning of long-term input-output dependencies. The advantages of LSTM compare to RNN technique is proven by previous works. In this study, LSTM networks is used to estimate the quantitative precipitation from weather radar for an urban catchment in South Korea. Radar information and rain-gauge data are used to evaluate and verify the estimation. The estimation results figure out that LSTM approaching method shows the accuracy and outperformance compared to Z-R relationship method. This study gives us the high potential of LSTM and its applications in urban hydrology.

• 한국수자원학회논문집
• /
• 제38권9호
• /
• pp.713-725
• /
• 2005

본 연구에서는 미국 지질조사국에서 개발한 PRMS 모형을 국내 7개 댐유역에 적용하여 국내 적용성과 모의한 계를 분석하였다. 모형의 적용성을 평가하기 위해 모형 이론과 매개변수에 대해 검토하고, 국내 실정을 고려한 입력자료와 매개변수 추정의 가용성을 분석하였다. 각 적용유역들에서 GIS자료를 활용하여 추정 가능한 매개변수들은 추정하고 나머지 변수들은 Rosenbrock 방법을 이용하여 보정하였다. 모의결과를 다각적으로 분석하여 PRMS 모형의 모의 능력과 한계를 분석한 결과 PRMS 모형은 모든 적용유역에서 관측치에 높은 적합성을 나타내었다. 기본값을 사용한 융설모의에서도 비교적 정확한 모의가 가능한 것으로 나타났다. 적용 유역면적에 상관없이 신뢰성 높은 유출분석이 가능하였으나, 대유역인 경우 준분포형적인 특성보다는 일체형모형에 가까운 유출모의를 하는 것으로 나타났다.

• Journal of the Korean Data and Information Science Society
• /
• 제28권6호
• /
• pp.1447-1456
• /
• 2017

강우현상을 구조적으로 모형화한 확률적 강우모의모형의 활용성이 증대되는 상황에서 확률적 강우모의모형의 모수에 대한 정확한 추정은 매우 중요하다. 본 연구에서는 확률적 강우모의모형 (Neyman-Scott rectangular pulse model, NSRPM)의 모수를 DFP (Davidon-Fletcher-Powell), GA (genetic algorithm), Nelder-Mead, DE (differential evolution) 기법으로 추정하고 추정된 모수의 적합성을 분석하고 지역특성에 적합한 모수 추정 기법을 제시하였다. 낙동강 유역의 20개 강우 관측 지점을 대상으로 1973년-2017년 기간 동안의 여름철 1시간 강수자료 이용하여 산정된 모형 모수를 분석한 결과, 전반적으로 DE, Nelder-Mead기법이 가장 좋은 결과를 보였으며 DFP, GA기법은 상대적으로 낮은 적합도를 보였다.

• 한국지구과학회지
• /
• 제31권5호
• /
• pp.437-447
• /
• 2010

Spatial estimation of environmental variables has been regarded as an important preliminary procedure for decision-making. A minimum variance criterion, which has often been adopted in traditional kriging algorithms, does not always guarantee the optimal estimates for subsequent decision-making processes. In this paper, a geostatistical framework is illustrated that consists of uncertainty modeling via stochastic simulation and risk modeling based on loss functions for the selection of optimal estimates. Loss functions that quantify the impact of choosing any estimate different from the unknown true value are linked to geostatistical simulation. A hybrid loss function is especially presented to account for the different impact of over- and underestimation of different land-use types. The loss function-specific estimates that minimize the expected loss are chosen as optimal estimates. The applicability of the geostatistical framework is demonstrated and discussed through a case study of copper mapping.