• 제목/요약/키워드: Appliance System

검색결과 447건 처리시간 0.022초

HMI 소프트웨어를 이용한 식물재배용 Chamber의 원격제어 [식물 성장의 상대적 증분 계산] (The Growth Chamber's remote control that use PLC and HMI software [Relative increment calculation of plant growth])

  • 전성동;이현우;곽동걸;전중함;최훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.459-461
    • /
    • 2002
  • Various device or devices is automated by developments of various control appliance. however, the control method is not escaping local area System. In these meaning, this research uses PLC and HMI software for the Growth Chamber's remote monitor and control.

  • PDF

Tread Mill 구동용 BLDC 제어기 개발 (Development of BLDC Motor Controller for Tread Mill Application)

  • 안진우;이동희;박성준
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.138-141
    • /
    • 2002
  • BLDCM(Brushless D.C. Motor) is widely used for industrial application because of high efficiency and high power density Especially, in servo system and home appliance, BLBCM is very useful due to high control performance and low acoustic noise. In this paper, 2.5HP rated BLDCM controller and drive was developed for tread mill application. The prototype BLDCM has 4 poles rotor and 24 slots stator. Ferrite was used as a rotor magnet due to the cost and temperature characteristic. For the stable operation of tread mill, over current and high temperature can be detected by the DSP controller. For the commutation signal, switching patterns from the sensorless circuit and hall sensor signal are used in the DSP controller.

  • PDF

간접유도가열용 고주파 공진형 인버터 시스템에 관한 연구 (A Study on the High-Frequency Resonant Inverter System for Indirect Induction Heating)

  • 권혁민;신대철;김기환;김용주
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.322-325
    • /
    • 2002
  • In this paper are described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20kHz to 50kHz. A specially designed induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted Into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

  • PDF

Pallet Truck용 6/4 SRM (6/4 SRM for Pallet Truck Application)

  • 송현수;안영주;안진우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.844-847
    • /
    • 2003
  • The environmental problem and the drain of petroleum fuel resources has been became the center of public interest. So the electric drive attracts public attention. The vehicles for indoor works should not pollute air. Therefore it is also useful that applying electric drive to such an appliance. An 1.2[kw] SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness, high efficiency make it possible to replace with DC motor. Test results show that pallet truck with SRM has better characteristics than that of the DC motor performance.

  • PDF

소음저감을 위한 EV용 SRM 구동 시스템의 설계 (Design of SRM for Low Noise Drive of EV)

  • 송현수;박성준;안진우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.840-843
    • /
    • 2003
  • The switched reluctance motor(SRM) drive system provides a good adjustable speed and torque characteristics. SRM has the possibility of maintaining full power over a wide speed range. So, many attempts are being done from home appliances to industrial machinery and tools. Especially, a traction drive of an SRM is one of a good application for it's DC-series characteristic. However, because of the switching mechanism, it has some disadvantage of noise and vibration. It is difficult to adopt to an appliance demanding silency. A noise simulation and design of 6/4 and 12/8 SRM was done in order to compare each other was done.

  • PDF

스마트폰 기반의 개인 환경 서비스 및 기술 (Personal Environment Service and Technology Based on Smart Phone)

  • 오종택
    • 한국통신학회논문지
    • /
    • 제38C권5호
    • /
    • pp.454-463
    • /
    • 2013
  • 스마트폰은 이미 보편화되었고 가전기기나 자동차 등의 각종 생활기기에 통신장치 및 센서가 내장되어 스마트폰과 연동되는 스마트 기기들이 연구 개발되고 있다. 또한 현재는 스마트폰을 이용한 단순한 리모컨이나 원격 제어장치, 사용자 인터페이스의 수준이지만 향후에는 스마트폰에 지능화 기술이 융합되어, 사용자나 기기, 생활환경의 속성을 반영하여 자동으로 기기들이 개인 맞춤형으로 설정되는 개인 환경 서비스 기술이 활성화될 것이다. 본 논문에서는 관련 서비스와 시스템 구조, 요소 기술에 관해 기술한다.

스마트 홈서비스를 위한 UPnP기반 홈 게이트웨이와 지능형 가전기기 간 연동 시스템 (Convergence System Between Home Gateway and Intelligent Home Appliance for Smart Home Service)

  • 한왕원;김영만
    • 한국IT서비스학회:학술대회논문집
    • /
    • 한국IT서비스학회 2007년도 춘계학술대회
    • /
    • pp.488-493
    • /
    • 2007
  • 최근 정보통신 기술의 발전으로 인하여 어느 장소에서든 컴퓨터 또는 무선장치를 사용하여 집안의 지능형 가전기기들을 점검하고 제어 할 수 있는 수준까지 이르렀다. 이와 같은 서비스를 제공하기 위한 요소기술 중에 마이크로소프트사에서 발표한 UPnP(Universal Plug & Play)는 TCP/IP 프로토콜을 기반으로 하여 각 지능형 가전기기에 IP주소를 할당하여 어느 곳에서나 누구나 편리하게 지능형 가전기기의 서비스를 이용할 수 있도록 해준다. 본 논문에서는 UPnP 미들웨어 기반의 홈 네트워크에서 웹 기반의 인터페이스를 통해 지능형 가전기기를 쉽게 관리할 수 있는 홈 게이트웨이와 지능형 가전기기 간 연동 시스템을 설계하고 구현한다.

  • PDF

UPnP 미들웨어기반의 홈 게이트웨이와 지능형 가전기기 간 연동 시스템 설계 및 구현 (Design and Implementation of Convergence System between Home Gateway and Intelligent Home Appliance Using UPnP Middleware)

  • 한왕원;김혜영;이동주;김영만
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
    • /
    • pp.435-440
    • /
    • 2006
  • 최근 정보통신 기술의 발전으로 인하여 어느 장소에서든 컴퓨터 또는 무선장치를 사용하여 집안의 지능형 가전기기들을 점검하고 제어 할 수 있는 수준까지 이르렀다. 이와 같은 서비스를 제공하기 위한 요소기술 중에 마이크로소프트사에서 발표한 UPnP(Universal plug & Play)는 TCP/IP 프로토콜을 기반으로하여 각 지능형 가전기기에 IP주소를 할당하여 어느 곳에서나 누구나 편리하게 지능형 가전기기의 서비스를 이용할 수 있도록 해준다. 본 논문에서는 UPnP 미들웨어 기반의 홈 네트워크에서 웹 기반의 인터페이스를 통해 지능형 가전기기를 쉽게 관리할 수 있는 시스템을 설계하고 구현한다.

  • PDF

하악골에 발생한 Ameloblastoma의 증례 (A CASE REPORT OF AMELOBLASTOMA OF THE MANDIBLE)

  • 김석환
    • 대한치과의사협회지
    • /
    • 제16권4호통권107호
    • /
    • pp.279-282
    • /
    • 1978
  • A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

  • PDF

심한 Angle씨 III급 부정교합의 치험예 (A CASE REPORT OF SEVERE ANGLE'S CLASS III MALOCCLUSION)

  • 성재현
    • 대한치과의사협회지
    • /
    • 제16권4호통권107호
    • /
    • pp.273-278
    • /
    • 1978
  • A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

  • PDF