• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.459-461
• /
• 2002

Various device or devices is automated by developments of various control appliance. however, the control method is not escaping local area System. In these meaning, this research uses PLC and HMI software for the Growth Chamber's remote monitor and control.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.138-141
• /
• 2002

BLDCM(Brushless D.C. Motor) is widely used for industrial application because of high efficiency and high power density Especially, in servo system and home appliance, BLBCM is very useful due to high control performance and low acoustic noise. In this paper, 2.5HP rated BLDCM controller and drive was developed for tread mill application. The prototype BLDCM has 4 poles rotor and 24 slots stator. Ferrite was used as a rotor magnet due to the cost and temperature characteristic. For the stable operation of tread mill, over current and high temperature can be detected by the DSP controller. For the commutation signal, switching patterns from the sensorless circuit and hall sensor signal are used in the DSP controller.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.322-325
• /
• 2002

In this paper are described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20kHz to 50kHz. A specially designed induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted Into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.844-847
• /
• 2003

The environmental problem and the drain of petroleum fuel resources has been became the center of public interest. So the electric drive attracts public attention. The vehicles for indoor works should not pollute air. Therefore it is also useful that applying electric drive to such an appliance. An 1.2[kw] SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness, high efficiency make it possible to replace with DC motor. Test results show that pallet truck with SRM has better characteristics than that of the DC motor performance.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.840-843
• /
• 2003

The switched reluctance motor(SRM) drive system provides a good adjustable speed and torque characteristics. SRM has the possibility of maintaining full power over a wide speed range. So, many attempts are being done from home appliances to industrial machinery and tools. Especially, a traction drive of an SRM is one of a good application for it's DC-series characteristic. However, because of the switching mechanism, it has some disadvantage of noise and vibration. It is difficult to adopt to an appliance demanding silency. A noise simulation and design of 6/4 and 12/8 SRM was done in order to compare each other was done.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.454-463
• /
• 2013

The smart phone has already proliferated, and the smart devices of the living appliances and vehicles embedded with communication device, sensors and connected with the smart phone have been developed. Currently it can provide simple remote controller and user interfaces, it could be envisaged that intelligent technology is converged with the smart phone, and Personal Environment Service in which the smart devices are configured automatically as reflecting personal preference, device attribute, and living environment condition would be activated in the future. In this paper PES services, system architecture, and core technology are described.

• 한국IT서비스학회:학술대회논문집
• /
• 2007.05a
• /
• pp.488-493
• /
• 2007

최근 정보통신 기술의 발전으로 인하여 어느 장소에서든 컴퓨터 또는 무선장치를 사용하여 집안의 지능형 가전기기들을 점검하고 제어 할 수 있는 수준까지 이르렀다. 이와 같은 서비스를 제공하기 위한 요소기술 중에 마이크로소프트사에서 발표한 UPnP(Universal Plug & Play)는 TCP/IP 프로토콜을 기반으로 하여 각 지능형 가전기기에 IP주소를 할당하여 어느 곳에서나 누구나 편리하게 지능형 가전기기의 서비스를 이용할 수 있도록 해준다. 본 논문에서는 UPnP 미들웨어 기반의 홈 네트워크에서 웹 기반의 인터페이스를 통해 지능형 가전기기를 쉽게 관리할 수 있는 홈 게이트웨이와 지능형 가전기기 간 연동 시스템을 설계하고 구현한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.435-440
• /
• 2006

최근 정보통신 기술의 발전으로 인하여 어느 장소에서든 컴퓨터 또는 무선장치를 사용하여 집안의 지능형 가전기기들을 점검하고 제어 할 수 있는 수준까지 이르렀다. 이와 같은 서비스를 제공하기 위한 요소기술 중에 마이크로소프트사에서 발표한 UPnP(Universal plug & Play)는 TCP/IP 프로토콜을 기반으로하여 각 지능형 가전기기에 IP주소를 할당하여 어느 곳에서나 누구나 편리하게 지능형 가전기기의 서비스를 이용할 수 있도록 해준다. 본 논문에서는 UPnP 미들웨어 기반의 홈 네트워크에서 웹 기반의 인터페이스를 통해 지능형 가전기기를 쉽게 관리할 수 있는 시스템을 설계하고 구현한다.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.279-282
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.273-278
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.