• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.99-109
• /
• 2011

This paper presents implementation details of home appliance control system using personal communicator based on LN2440 single board computer, which recognizes hand-gesture of user, controls remote moving device such as mobile home server, robot etc. through delivery of proper control commands. Also, this paper includes details of design and implementation of home gateway and mobile home server. The implemented prototype can be utilized to develop various remote control system including a remote exploration robot, intelligent wheelchair based on general purpose embedded system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.464-469
• /
• 2015

This paper presents the smart system platform for remotely controlling the windows and doors system(WDS), which gathers and analyzes the state of WDS and the environmental data for preventing crimes and keeping a pleasant indoor. In particular, standard API between the smart WDS platform and the smart home platform has been presented to be easy to a home services, such as security, safety, and home appliance control. The private gateway of wire and wireless communication interfaces has been developed to remotely control and monitor the WDS for anytime and anyplace solving the crime prevention and ventilation problem. Web-and App-based user interface in order to detect the opening and shutting states and remotely control WDS have also been developed to support the mobile environment, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.73-80
• /
• 2009

In this paper, we implemented the integrated gateway for health care and home network system based on PLC(Power Line Communication) and Zigbee. The designed system is consists of sensors, integrated gateway, Zigbee module and PLC modem. The integrated gateway will transmit the data which is collected by health care sensors to health care control system and control an appliance for comfortable environment to medical facilities. The implemented gateway can support various health care and home network service.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.153-160
• /
• 2002

This paper describes the design and implementation of library for real-time operating system Q+, that was developed for the internet appliance. The library in the real-time operating system should be defined according to the standard interface and support the functions that are adequate to the real-time application. To ensure the compatibility between application programs, the Q+ library follows industrial and international standards, such as POSIX.1, ISO 7942 GKS. And, to support the Q+ application, library provides C standard functions, graphic/window functions, network functions, security support functions, file system functions. The Q+ library was implemented using the Q+ kernel, Digital TV set-top box, and KBUG debugging tool.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.47-51
• /
• 2007

As time goes by, ultrasonic wave is getting important and new technology, which is adapted to ultrasonic wave is used to industry such as home appliance, automobile, and high-tech industry. Especially, ultrasonic wave is used an alarm device whether there are things at the rear of I. It's do important device in automobile system because it can prevent car-accident from inattention of the driver. Actually, there has already been lots of the alarm device. But it's expensive and so difficult to set the device. So almost driver don't set device at their automobile. We focus on these problems. We want to make cheap md easy setting device. Ultrasonic wave sensor emits Ultrasonic-signal at outgoing part and receive part accept the signal. Sensor analyzes the signal and Distance is displayed on LCD of device. The device makes alarm if distance is near from something of rear. The device makes break-system operate to prevent drivers from crashing if distance is so near. This device is portable. So normal deriver can set it easily.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.327-337
• /
• 1999

This study was conducted on a sampling of 700 mixed college students from seven different schools nationwide by written questionnaire to evaluate the value system of convenience foods among Korean college students. Korean students put value on the following categories of convenience foods in order; convenience, taste, price, appearance, appliance to daily life, variety, locality, nutritional value, originality, improvement required, cleanliness and tradition. Significant differences between the sexes occurred in categories as cleanliness and convenience, since females considered convenience foods as convenient but not so clean (safe to eat). This study also conducted factor analysis on 24 individual convenient foods. Noodles laid emphasis on nutritional value; where refrigerated foods, ready to eat (RE) side dishes, on-the-spot kimbab, and sandwiches focused on cleanliness. Noodles. cereal, and instant soup focused on price. Frozen pizza, noodles, retort, RE meat, ham, fish cakes were dependent on locality and traditionality. Noodles, instant food, and packed kimchi scored highly on convenience. Frozen fried rice, retort, instant porridge, instant rice, RE meat, cereal, instant soup, and RE side dishes on consumption on a regular basis. Cereal, refrigerated foods, and RE side dishes laid emphasis on taste. Noodles, instant rice, cereal, ham, and RE side dishes focused on variety. Retort, RE meat, ramen, cereal, ham, and on the spot sandwiches looked to originality, while canned foods was recognized as ‘needing improvement’.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.47-55
• /
• 2022

Quality control in the smart factory manufacturing process is an important factor. Currently, quality inspection of home appliance manufacturing parts produced by the mold process is mostly performed with the naked eye of the operator, resulting in a high error rate of inspection. In order to improve the quality competition, an automatic defect detection system was designed and implemented. The proposed system acquires an image by photographing an object with a high-performance scan camera at a specific location, and reads defective products due to scratches, dents, and foreign substances according to the vision inspection algorithm. In this study, the depth-based branch decision algorithm (DBD) was developed to increase the recognition rate of defects due to scratches, and the accuracy was improved.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.679-685
• /
• 2011

This paper presents an algorithm identifying devices that generate observed mixed signals that are collected at main power-supply line. The proposed algorithm, which is necessary for low cost electric power monitoring system at appliance-level, that is non-intrusive load monitoring system, divides incoming mixed signal into multiple time intervals, calculating difference-signals between consecutive time interval, and identifies which device is operating at the time interval by analysing the difference-signals. Since the features of one device can remain when the time interval is short enough and the features are independent and additive, well-known classification algorithms can be used to classify the difference-signals with features of N individual devices, otherwise $2^N$ features might be necessary. The proposed algorithm was verified using data mixed in a laboratory with individual devices's data collected from field. When maximum 4 devices operate or stop sequentially and when features satisfy the requirements of proposed algorithm, the proposed algorithm resulted nearly 100% success rate under the constrained test condition. In order to apply the proposed algorithm in real world, the number devices shall increase, the time interval shall be smaller and the pattern of mixture shall be more diverse. However we can expect, if features used follow guidelines of proposed algorithm, future system could have certain level of performance without the guideline.