• 자원환경지질
• /
• 제33권4호
• /
• pp.309-320
• /
• 2000

Aperture is an important parameter for determining the hydraulic characteristics of fractured media. In this study the topography of artificial rock joint surface was measured using 3D laser profilometer to analyze the aperture distribution. The initial aperture distribution was determined when the contact area became one percent of total joint surface. The initial aperture distribution of granite joint, with the mean value of 0.78 mm and the standard deviation of 0.34 mm was much different from that of the marble joint, with the mean value of 0.57 mm and the standard deviation of 0.26 mm. Apertures of both granite and marble showed normal distributions. Aperture distribution with the contact area of 25% was also analyzed. Mean value was decreased to one third compared to the initial aperture, but the standard deviation was decreased slightly. To determine the spatial correlation of the aperture distribution variogram analysis was carried out on the initial aperture data. Most experimental variograms were fitted well with exponential model. It is expected that the measured aperture characteristics can be used for stochastic analysis of fluid flow through rock joints.

• Journal of the Optical Society of Korea
• /
• 제10권1호
• /
• pp.23-27
• /
• 2006

We are studying the application of an adaptive optics system to upgrade the beam quality of a laser. The adaptive optics (AO) system consists of a bimorph deformable mirror, a Shack-Hartmann sensor and a control system. In most AO applications, the beam aperture is considered to be circular. However, in some cases such as laser beams from unstable resonators, the beam apertures are annulus or a holed-rectangle. In this paper, we investigate how well a bimorph deformable mirror of ${\Phi}120\;mm$ clear aperture can compensate phase distortions for three different beam configurations; 1) ${\Phi}120\;mm$ circular aperture, 2) ${\Phi}100\;mm$ annulus aperture with a ${\Phi}20\;mm$ hole and 3) $70\;mm{\times}70\;mm$ square aperture with a hole of $30\;mm{\times}30\;mm$. This study concludes that the bimorph mirror, which might be considered as a modal controller, can compensate tilt, defocus, coma and astigmatism, and spherical aberration for all three beams.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.214-217
• /
• 2001

마이크로웨이브 연속 건조기는 전자파를 사용하여 피건조물의 내부로부터 건조시키는 가열장치로서 주로 ISM 주파수 대역(915MHz와 2450MHz을 사용한다 피건조물의 연속적인 가열을 위해서는 건조체가 통과하는 입ㆍ출구가 개방되어야한다. 이러한 마이크로웨이브 연속 건조기는 응용 분야가 무한함에도 불구하고 균일 가열, 개방 공간 작업과 같은 기술적 제약으로 인해 가정용 마이크로웨이브 오븐 정도의 수준에 머물고 있는 상태이다. 본 논문에서는 2450MHz의 마이크로웨이브 주파수에서 동작하는 연속 건조기에 적합한 구조 설계를 위해 유한 차분 시간 영역(FDTD : Finite-Difference Time-Domain)법을 이용하여 건조기 내부와 외부의 전자계 분포를 해석하였다.

• ETRI Journal
• /
• 제33권2호
• /
• pp.291-294
• /
• 2011

This letter proposes an open-ended waveguide antenna with a single split-ring resonator. In contrast to the waveguide antennas incorporating multiple rings reported in a previous study, which exhibited narrow bandwidth, the proposed antenna uses only one ring to achieve broader bandwidth while keeping the aperture small. A single ring has a relatively low quality factor compared to multiple rings. The simulated and measured fractional bandwidth was 4.13% and 4.03%, respectively, which is much broader than the fractional bandwidth of about 1% demonstrated in a previous study. This simple technique can be used in many applications that require small apertures including near-field probes and array elements.

• Journal of Species Research
• /
• 제6권3호
• /
• pp.232-236
• /
• 2017

The first occurrence of the genus Hornera (Bryozoa, Cyclostomata) is reported from waters around Jeju Island, Korean Peninsula. Hornera jeongsangi n. sp. differs from all known species of the genus Hornera in having very prominent spiny protrusions around the autozooidal apertures, which are not arranged in fascicles, the gonozooidal ooeciopore facing frontally and nonporous zooidal walls around the ooeciopore.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.916-919
• /
• 2017

본 논문에서는 모바일 기기용 소형 금속 캔으로부터 발생하는 전자기장의 누설 경로를 시뮬레이션을 통해 확인하고, IC-stripline 방법을 이용하여 전기장 및 자기장에 대한 근접장 결합(coupling) 현상을 분석하였다. 금속 캔의 윗면 개구부에 의한 전자기장 누설은 주로 자기장이 우세하고, 측면을 통한 누설은 전기장이 우세함을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.139-146
• /
• 2013

This paper proposes a new spatial filtering approach for increasing the depth-of-field (DOF) of imaging systems, which is very useful for obtaining sharp images for a wide range of axial positions of the object. Many different techniques have been reported to increase the depth of field. However the main advantage in our method is its simplicity, since we propose the use of purely absorbing beam-shaping elements, which allows a high focal depth with a minimum modification of the optical architecture. In the filter design, we have used the analogy between the axial behavior of a system with spherical aberration and the transverse impulse response of a 1D defocused system. This allowed us the design of a ring-shaded filter. Finally, experimental verification of the theoretical statements is also provided.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.422-423
• /
• 2005

RF Micro switches is a miniature device or an array of integration devices and mechanical components and fabricated with Ie batch-processing techniques. RF Micro switches application area are in phased arrays and reconfigurable apertures for defence and telecommunication systems, switching network for satellite communication, and single-pole double throw switches for wireless application. Recently, RF Micro switches have been developed for the application to the milimeter wave system. RF Micro switches offer a substantilly higher performance than PIN diode or FET switches. In this paper, SPDT(single-pole-double-throw) switch are designed to use 10 GHz. Actuation voltage and displacement are simulated by tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.318-321
• /
• 2005

FIB (Focused ion Beam) milling on a 500-nm-thick silicon nitride membrane was studied in order to fabricate a high-resolution shadow mask, or called a nanostencil. The silicon nitride membrane was fabricated by MEMS processes of LPCVD, photolithography, ICP etching and bulk silicon etching. The apertures made by FIB milling and normal photolithography were compared. The square metal pattern deposited through FIB milled shadow mask showed 6 times smaller comer radius than the case of photolithography. The results show high resolution patterning could be achieved by local deposition through FIB milled shadow-mask.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.652-655
• /
• 2004

RF MEMS is a miniature device or an array of integration devices and mechanical components and fabricated with If batch-processing techniques. RF MEMS application area are in phased arrays and reconfigurable apertures for defence and telecommunication systems, switching network for satellite communication, and single-pole double throw switches for wireless application. Recently, RF MEMS switches have been developed for the application to the milimeter wave system. RF MEMS switches offer a substantilly higher performance than PM diode or FET switches. In this paper, SPDT(single-pole-double-throw) switch are designed to use 10 GHz. Actuation voltage and displacement are simulated by tool. And stress and distribution are simulated.