• Title/Summary/Keyword: Antimony

검색결과 227건 처리시간 0.027초

불포화 이소프탈산 폴리에스터 수지의 난연제 첨가 효과 연구 (A Study on the Effects of Flame Retardants in Unsaturated Isophthalic Acid Polyester Resin)

  • 최원종
    • 한국화재소방학회논문지
    • /
    • 제12권4호
    • /
    • pp.41-49
    • /
    • 1998
  • 본 연구에서는 FRP용 모재수지로 사용되는 이소프탈산계 불포화폴리에스터 수지의 난 연제 첨가에 따른 연소특성의 변화에 대하여 알아보았다. 난연제로 수산화 알루미늄 ( (AHOHh), 삼산화 안티몬(Sb203), 알루미나 분말을 사용하였다. 난연제 첨가량의 증가에 따라 수지의 경도값이 감소하였다. 수산화 알루미늄의 첨가량이 증가할수록 연소속도가 감소되었다. 삼산화 안티몬을 추가로 소량(2.5 phr) 첨가할 때 잔유물의 생성량(char yield : : 31%)이 증가되고, 연소특성이 더욱 개선되었다. 결론적으로, 난연처리를 하지 않은 수지 의 경우 다량의 화염과 연기를 발생하며 격렬히 연소하였지만 난연처리하였을 경우 자기 소화성을 가지며 화염과 연기의 양이 상당히 줄어들게 됨을 알 수 있었다.

  • PDF

무열분해법으로 증착한 $SnO_2$ 박막의 방향성과 결함구조 (Orientation and Defects of $SnO_2$ Films Deposited by Spray Pyrolysis)

  • 김태희;박경봉
    • 태양에너지
    • /
    • 제18권2호
    • /
    • pp.137-144
    • /
    • 1998
  • 분무열분해법으로 $SnO_2$ 박막을 증착하여 기판표면의 온도에 따른 방향성과 결함을 조사하였다. 기판의 온도가 $300^{\circ}C$일 때부터 결정성 박막이 증착되었다. 기판의 온도가 $400^{\circ}C$까지 증가함에 따라 (200)면이 우선적으로 성장하였으며 결정립의 크기도 증가하였다. Sb를 첨가하지 않은 박막은 Sn과 O로 구성되어 있으며 산소공위를 포함한다. Sb를 첨가한 박막은 산소공위 외에 Sn 위치와 O 위치에 각각 치환된 Sb와 Cl을 가진다.

  • PDF

태양전지용 SnO2:Sb 박막의 제조 조건에 따른 전기적, 광학적 특성 연구 (A Study on the Electrical and Optical Properties of SnO2:Sb Thin Films Prepared by Different Conditions for Photovoltaic Applications)

  • 이재형
    • 한국전기전자재료학회논문지
    • /
    • 제22권3호
    • /
    • pp.269-276
    • /
    • 2009
  • Antimony doped tin oxide ($SnO_2:Sb$) films, which are used as the front contact and back reflector of thin film solar cells, have been deposited by d,c, magnetron sputtering. The dependence of electrical and optical properties of the films on the preparation conditions, such as $O_2$ gas ratio, substrate temperature, annealing temperature was investigated. The sputter gas composition was found to affect the properties of the films. With incorporating $O_2$ gas, the electrical and optical properties of films significantly were improved. The minimum resistivity and optical transmittance over 80 % in visible region were obtained at the oxygen concentration of 30 %, When the substrate temperature was higher, the resistivity of $SnO_2:Sb$ films was decreased, while the absorption edge shifted to shorter wavelength, indicating higher optical band gap. Heat treatment over $600^{\circ}C$ resulted in poorer electrical and optical properties due to SnO phase (102) plane.

In과 Sb의 첨가가 Tin Oxide 가스센서에서 Resistivity와 Sensitivity에 미치는 영향 (The Effects of Additions of In & Sb on Resistivity & Sensitivity in Tin Oxide Gas Sensors)

  • 손영목;한상도;김종원;심규성
    • 센서학회지
    • /
    • 제1권2호
    • /
    • pp.165-172
    • /
    • 1992
  • 3가와 5가 이온의 첨가가 전기전도도 및 감응도에 어떤 영향을 미치는가를 확인하기 위하여, In와 Sb를 Tin Oxide에 공침법으로 첨가하였다. Sb는 5가 이온으로 cassiterite 구조에 들어가서 열에너지에 의하여 이들 이온을 여기시켜 전도대로 밀어올리리라고 여겨진다. In 이온은 결정격자 속에 $In^{3+}$로 들어가서 원자가대로 부터 전자를 받게 되고 그러므로써 1가나 2가가 되리라 생각한다. 그러나, 이러한 현상들이 $SnO_{2}$에 존재하는 전위장벽을 2종의 이온첨가에 의하여 일어나는 resistivity에 끼치는 영향과 비교해 볼 때 감응도에는 어떤 영향을 보이는지 고찰하였다.

  • PDF

ATH, Sb$_2$O$_3$조성에 따른 복합재료의 난연특성 (The Effect of ATH and Sb$_2$O$_3$on the Flammability and Mechanical Properties of Fiber Reinforced Plastics)

  • 강길호;최원종;김진곤;권경옥;박상윤;사공성호;김해형
    • 한국화재소방학회논문지
    • /
    • 제16권4호
    • /
    • pp.65-71
    • /
    • 2002
  • 무기계 난연제로 널리 사용되고 있는 aluminum trihydrate와 antimony trioxide의 첨가에 의한 열화거동과 난연효과를 열분석 및 화염특성시험(LOI test, flammabilty을 45 degree test)을 통하여 알아보았다. 일반 구조용 glass fiber/unsaturated polyester 복합재료 제조 시 난연 조성에 따른 난연 효과와 기계적 특성(경도, 인장강도, 탄성률) 변화를 조사하였다. 항공우주용 구조에 사용되는 난연 처리된 glass fiber/epoxy prepreg 복합재료 제조 시 공정조건에 따른 난연 특성을 비교 분석하였다. 실험결과를 이용하여 난연제의 난연 기구 및 기계적 물성을 고려한 최적 난연 조성은 ATH의 경우 10∼20 phr이였으며, autoclave 공정압력이 증가할수록 높은 LOI 값을 보였다.

실리콘에 고에너지 안티몬이온주입의 실험과 개선된 모델에 관한 연구 (A Study of Experiment and Developed Model by Antimony High Energy Implantation in Silicon)

  • 정원채
    • 한국전기전자재료학회논문지
    • /
    • 제17권11호
    • /
    • pp.1156-1166
    • /
    • 2004
  • Antimony profiles by MeV implantation are measured by secondary ion mass spectrometry (SIMS) and spreading resistance (SR). The moments of SIMS and simulated profiles are calculated and compared for the exact range in MeV energy. SRIM, DUPEX, ICECREM, and TSUPREM4 simulation programs are used for the calculation of range 1D, 2D. SRIM is a Monte Carlo simulation program and different inter-atomic potentials can be used for the calculation of nuclear stopping power cross-section (Sn) and range moments. Nevertheless, the range parameters were not influenced from nuclear stopping power in MeV. Through the modification of electronic stopping power cross-section (Se), the results of simulation are remarkably improved and matched very well with SIMS data. The values of electronic stopping power are optimized for Sb high energy implantation. For the electrical activation, Sb implanted samples are annealed under $N_2$ and $O_2$ ambient. Finally, Oxidation retard diffusion(ORD) effect of Sb implanted sample are demonstrated by SR measurements and ICECREM simulation.

두 종의 고체윤활제에 따른 마찰재의 마찰성능에 관한 실험적 고찰 (Experimental Investigation on Friction Performance of Brake Linings with Two Different Solid Lubricants)

  • 김성진;배은갑;윤호규;장호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.72-78
    • /
    • 2001
  • An experimental investigation was conducted to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb$_2$S$_3$). In order to investigate the effect of the solid lubricants on brake performance, three different friction tests (pressure, speed, and temperature sensitive tests) were carried out using a scale dynamometer. The test results showed that the friction characteristics were strongly affected by the type and the amount of solid lubricants in the brake lining. It was found that the brake linings with both solid lubricants were better in friction stability due to the complementary role of the two disparate lubricating properties at various pressure and speed conditions. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high temperature friction test.

  • PDF

Leachability of lead, cadmium, and antimony in cement solidified waste in a silo-type radioactive waste disposal facility environment

  • Yulim Lee;Hyeongjin Byeon;Jaeyeong Park
    • Nuclear Engineering and Technology
    • /
    • 제55권8호
    • /
    • pp.2889-2896
    • /
    • 2023
  • The waste acceptance criteria for heavy metals in mixed waste should be developed by reflecting the leaching behaviors that could highly depend on the repository design and environment surrounding the waste. The current standards widely used to evaluate the leaching characteristics of heavy metals would not be appropriate for the silo-type repository since they are developed for landfills, which are more common than a silo-type repository. This research aimed to explore the leaching behaviors of cementitious waste with Pb, Cd, and Sb metallic and oxide powders in an environment simulating a silo-type radioactive waste repository. The Toxicity Characteristic Leaching Procedure (TCLP) and the ANS 16.1 standard were employed with standard and two modified solutions: concrete-saturated deionized and underground water. The compositions and elemental distribution of leachates and specimens were analyzed using an inductively coupled plasma optical emission spectrometer (ICP-OES) and energy-dispersive X-ray spectroscopy combined with scanning electron microscopy (SEM-EDS). Lead and antimony demonstrated high leaching levels in the modified leaching solutions, while cadmium exhibited minimal leaching behavior and remained mainly within the cement matrix. The results emphasize the significance of understanding heavy metals' leaching behavior in the repository's geochemical environment, which could accelerate or mitigate the reaction.

유방암 환자에서 $^{99m}Tc$-Antimony Trisulfide Colloid, $^{99m}Tc$-Tin Colloid, $^{99m}Tc$-Human Serum Albumin을 이용한 감시림프절 매핑 성적의 비교 (Comparison of the Results for Sentinel Lymph Node Mapping in the Breast Cancer Patients using $^{99m}Tc$-Antimony Trisulfide Colloid, $^{99m}Tc$-Tin Colloid, and $^{99m}Tc$-Human Serum Albumin)

  • 장성준;문승환;김석기;김범산;김석원;정기욱;강건욱;이은숙
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제41권6호
    • /
    • pp.546-552
    • /
    • 2007
  • 목적: 유방암 환자에게 불필요한 액와림프절 전절제술을 예방하기 위해서는 감시림프절을 절제하여 전이 여부를 평가하는 것이 중요하다. 감시림프절 매핑을 위한 방사성교질중 antimony trisulfide colloid (ASC), tin colloid (TC), human serum albumin (HSA) 이상의 3가지 교질에 $^{99m}Tc$을 표지하여 각각에서 림포신티그라피, 감시림프절 매핑의 성적을 비교하였다. 대상 및 방법: 2001년 10월부터 2006년 12월까지 임상적으로 액와림프절 전이가 없는 조기 유방암 환자 총 397명에게 시행한 림포신티그라피와 수술 중 감시림프절 절제 동결절편 검사, 및 수술 후 병리 소견을 후향적으로 평가하였다. 림포신티그라피 영상 소견을 분석하고, 감시림프절의 발견율(identification rate)과 위음성율(false negative rate), 그리고 음성예측도(negative predictive value)를 구하여 각 군의 자료에 대해 Fisher 직접확률법으로 비교하였다. 결과: 202명에게는 $^{99m}Tc$ ASC를, 120명에게는 $^{99m}Tc$-TC를, 75명에게는 $^{99m}Tc$-HSA를 사용하였으며 평균 연령, 병기, 원발 종양의 크기 등에서는 각 군별 환자들 사이에 유의한 차이가 없었다. ASE는 59명에게는 유륜부 피내 혹은 피하주사법을 사용했으며 136명에게는 종양주위 주사를, 그리고 7명의 환자에게는 두 가지를 병용하였다. TC와 HSA를 사용한 환자들에게는 모두 피내 혹은 피하주사하였다. 액와림프절 전이는 ASE사용 군에서 33.2%, TC 사용군에서 31.7%, HSA 사용 군에서 22.7%였으며 통계적으로 유의한 차이는 없었다. 감시 림프절 발견율(IR) 과 위음성율(FNR) 그리고 음성예측도(NPV) 는 사용한 교질 ASC/TC/HSA 각각에 대해 99.0%, 21.5%, 90.5% / 96.7%, 20.5%, 90.7% / 94.7%, 17.7%, 94.7%로 사용한 교질의 종류에 따라 통계적으로 유의한 차이가 없었다. 감시림프절 매핑 성적은 방사성교질의 주사방법에 따라서 유의한 차이를 보이지 않았다. 림포신티그라피의 영상에서 감시림프절이 명확히 구분된 경우는 ASC에서 79.6%, TC 에서 92.5%, HSA에서 88.6%였다. 림프관이 관찰된 비율은 ASC에서 43.6%, TC에서 0.8%, HSA 에서 96.8%이었다. 림포신티그라피에서 관찰된 감시림프절의 개수는 HSA가 가장 많았지만 통계적으로 유의한 차이는 없었다. 결론: ASC, TC 및 HSA등의 방사성교질을 이용한 감시림프절 매핑 성적은 서로 유의한 차이를 보이지 않았다.

혼합소스 HVPE 방법에 의한 InGaN 나노구조의 성장에 있어서 Sb 첨가의 영향 (Effects of antimony addition on growth of InGaN nano-structures by mixed-source HVPE)

  • 옥진은;조동완;전헌수;이아름;이강석;조영지;김경화;장지호;안형수;양민
    • 한국결정성장학회지
    • /
    • 제20권3호
    • /
    • pp.113-116
    • /
    • 2010
  • 본 논문에서는 Sb를 촉매제로 이용하는 경우의 InGaN 나노구조의 성장과 구조적 특징 및 광학적 특성에 대해서 연구하였다. 결정성장에 있어서 촉매제의 사용은 성장 모드의 변화와 결정 결함의 감소 등을 위한 목적으로 많이 사용되어왔다. 본 연구에서는 혼합소스 HVPE(hydride vapor phase epitaxy) 사용하여 (0001) 사파이어 기판 위에 InGaN 나노구조를 성장하였고, 구조적 및 광학적 특성은 scanning electron microscope(SEM)과 photoluminescence(PL)를 통해 평가하였다. Sb이 첨가되지 않은 경우에는 InGaN 나노구조가 c-축 방향으로 정렬되는 경향을 보이지만 Sb이 첨가된 경우에는 InGaN 나노구조의 c-축 방향이 기판에 대해 평행하거나 경사진 방향으로 정렬되고 있는 것을 관찰할 수 있었다. In의 조성은 Sb 의 첨가 여부에 관계없이 약 3.2% 정도로 계산되었다. 이러한 결과들로부터 측면 배향된 나노입자를 활성층으로 하는 광소자에 적용할 경우 압전 전계를 완화할 수 있기 때문에 광소자의 발광 성능을 향상시킬 수 있을 것으로 기대된다.