• Fashion & Textile Research Journal
• /
• v.4 no.6
• /
• pp.557-563
• /
• 2002

Water-soluble chitosan and water-insoluble chitosan with molecular weight of 2,000,000, 500,000, 80,000, and 40,000 with more than 90%of degree of deacetylation were produced to test antibacterial activity of chitosan against a pathogenic bacteria, Methicillin Resistant Staphylococcus aureus(MRSA). the AATCC Test Method 100and Modified AATCC Test Method 100 were used to evaluate the antibacterial activity of chitosan. Antibacterial activity of chitosan/acetic acid solution was the same when they were tested by two different methods, but those of polyester fabrics treated with chitosan/acetic acid solution were different in different antibacterial test. So several problems were found in the experimental methods. The AATCC Test Method 100 seems that excessive nutrition exists in inoculum solution by quantitative analysis on the basis the result of antibacterial activity on chitosan/acetic acid solution and amount of chitosan attached to the surface of treated fabrics.

• Journal of Veterinary Clinics
• /
• v.1 no.1
• /
• pp.41-47
• /
• 1984

The author carried out bovine mastitis test by California Mastitis test(CMT) for the milk from dairy cows in the surburbs of Taejeon. In order to select prefer commercial therapeutic antibacterial agents for mastitis treatment, Staphylococcus aureus were isolated from the CMT positive milk and the strains were tested for the tolerance test to the agents. The results obtained were summarized as follows : 1. The tolerance test appeared graduate tolerance in cases with continuously repeat of therapeutic agents. 2. The antibacterial agents revealed strong tolerance were D-and E-ointments. 3. The antibacterial agents revealed suspect tolerance were A-and F-ointments and ampicillin, penicillin, kanamycin and streptomycin. 4. The antibacterial agents revealed non or rare tolerance were B-and G-ointments and chloramphenicol, erythromycin and oxytetracycline. 5, It is concluded that the use of 3-day-interval in turn with antibacterial agents selected by tolerance test may be beneficial.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.141-152
• /
• 2001

Eliminating the infecting bacteria of the root canal system and preventing reinfection must be the main objectives of all endodontic works. None of commercially available root canal sealers have the properties of desirable tissue compatibility and strong antibacterial activity. The purpose of this study is to develope an ideal root canal sealer using commercially available polyphosphate (polyP), Calgon, which is known to be antibacterial and safe. For the study. resin type AH26, zinc oxide eugenol type Tubli Seal. Ca(OH)$_2$ type Apexit as base sealers for polyP (0~3%) and para formaldehyde containing N2 as a control base were selected. Specimens (3$\times$4mm) of the sealers were prepared in a 37$^{\circ}C$ incubator for 3 and 10 days and their antibacterial activity against streptococci and black pigmented anaerobic rods was observed using an agar diffusion method. The result were as follows: 1. Among 3 day old root canal sealers. N2 as a positive control showed the strongest antibacterial effect. followed by AH26. Tubli Seal and. Apexit which barely showed antibacterial activity against the test bacteria. In contrast. 10 day old AH26 showed a greater antibacterial activity than 10 day old N2. 2. All sealer specimens showed a greater antibacterial activity against black pigmented anaerobic rods than streptococci. Three day old ones appeared to be more antibacterial than 10 day old ones except for Apexit. 3. As compared to N2, 3 day old AH26 demonstrated a similar antibacterial activity against black pig mented anaerobic rods but to a lesser extent to streptococci. Ten day old AH26 showed a greater antibacterial activity against black pigmented anaerobic rods than 10 day old N2. 4. As compared to AH26. Tubli Seal generally revealed a lower antibacterial activity but it showed a greater antibacterial activity aginst S. gordonii Challis. 5. Enhancement of antibacterial activity by polyP was more clearly observed when it was added to Ca(OH)$^{\circ}C$ based root canal sealers. Tubli Seal and N2. 6. The addition of polyP enhanced the antibacterial activity of 3 day old AH26 against S. gordonii G9B (16%) and Challis (29%), and P. gingivalis 2561 (24%) only. Moreover, polyP failed to increase antibacterial activity of 10 day old AH26 against the test strains but P. gingivalis A7A1 28(13%). 7. The addition of polyP increased the antibacterial effect of 3 day old Tubli Seal on several test bacteria including s. mutans GS 5 (50%). s. gordonii G9B (47%) and Challis (122%). and all the test strains of P. gingivalis (13~35%) except for 9 14K 1. The addition of polyP to 10 day old Tubli Seal increased antibacterial activity of the root canal sealer against most test strains. 8. 3 day old Apexit failed to show antibacterial activity. if any very little against S. mutans GS 5 and Pr. intermedia ATCC 49046. However. polyP increased its antibacterial activity by 50 and 69%, respectively. Increase of antibacterial activity of 10 day old Apexit by polyP was more clearly observed than that of 3 day old one.

• Journal of the Korean Home Economics Association
• /
• v.42 no.3
• /
• pp.145-158
• /
• 2004

Experimental conditions for evaluating chitosan antibacterial activities were established. The chitosan antibacterial activities were measured against the Staphylococcus aureus and evaluated for their application to antibacterial textile finishing. The strain of Staphylococcus aureus used in this experiments was KCTC 1916. The chitosan antibacterial activities were estimated from the bacterial densities or ％reduction of bacteria in chitosan solutions and bacterial culture mixtures after incubation under specific conditions. Six parameters as follows were evaluated to optimize the experimental conditions for measuring antibacterial activities. The different combinations of mixtures according to the different ratios of chitosan solutions to the bacterial cultures showed different antibacterial activities. However, the chitosan antibacterial activities could be evaluated by comparing the data obtained from the same combinations of mixtures. The solvent influence on the chitosan solution antibacterial activities could be eliminated using control solution containing the same concentration of acetic acid. The initial pH of the chitosan -bacterial mixtures also affected the chitosan antibacterial activity; at a higher pH, higher activity in terms of ％reduction of bacteria was observed. In case of the bacterial solution without either the acetic acid or chitosan, the initial pH of the solution did not significantly affect bacterial growth. The ％ reduction of bacteria increased when contact times of bacteria with chitosan in the chitosan -bacterial mixture were expended upto 24 hours. However, the chitosan antibacterial activities could be successfully evaluated at contact time 0 where the chitosan-bacterial mixture was plated immediately after mixing and incubated to measure the bacterial number to 24 hours. Evaluating ％reduction of bacteria in the test mixtures after incubation were not changed when the inoculated bacterial concentrations were 2.3${\times}$10$\^$0/ml to 2.3${\times}$10$\^$6/ml. The optimal range of incubation time of the petri-Dish after plating the chitosan-bacterial mixture was 24 to 72 hours depending on the antibacterial activities of the test solutions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.360.2-360.2
• /
• 2016

CuSn thin films were fabricated by rf magnetron co-sputtering method on the Si(100) substrate for evaluation of the antibacterial effect. The co-sputtering process was performed with different rf powers and sputtering times to regulate the thickness of the films and relative atomic ratio of Cu to Sn. The physicochemical properties of the CuSn thin films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), Optical microscope (OM), 4-point probe, and antibacterial test. An antibacterial test was conducted with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as changing contact times between CuSn fillms and bacteria suspension. We compared to the crystalline structures of films before sterilization and after sterilization by XRD measurement. The changes of oxidation states of Cu and Sn and the chemical environment of films before and after antibacterial test were investigated with high resolution XPS spectra in the regions of Cu 2p, Cu LMM, and Sn 3d. After antibacterial test, the morphology of the films was checked with an OM images. The electrical properties of the CuSn films such as surface resistance and conductivity were measured by using 4-point probe.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.975-980
• /
• 2002

We actually installed antibacterial air filter on the air intake route to air conditioner in passenger car and evaluated filters performance on antibacterial effect. And also, antibacterial effect was observed at whole are of filter media by zone of inhibition test. In the evaluation of antibacterial test, it was shown that the air filter has notably sufficient antibacterial efficiency against ordinary filter.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.254-263
• /
• 2021

In this study, chitosan obtained after varying extents of deacetylation (i.e., 10%, 30%, and 47%) was employed to introduce antibacterial properties to chitin. The deacetylation reaction completion, wherein the amino group content of chitin was reduced, was ascertained from the FT-IR and NMR analyses. The 47%-deacetylated chitosan exhibited superior antibacterial properties against Bacillus in a disk diffusion test. To further improve these properties, chitosan derivatives were grafted by acrylic acid and acrylamide. The varying concentrations of carboxyl groups, primary amines, and -CH₂-CH₂- with increasing acrylic acid and acrylamide contents were determined by FT-IR and NMR analyses. The enhanced antibacterial properties of the chitosan derivatives, owing to the increased acrylic acid and acrylamide contents, were revealed by the disk diffusion test. In particular, the derivatives with 1.3% acrylic acid and acrylamide showed the highest antibacterial activity, the bacterial reduction rate against Staphylococcus aureus and Escherichia coli being 99.9%, as observed through the ASTM E2149 standard test.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.81-84
• /
• 2005

Skin patch test and antibacterial properties of the reaction products between poly(hexamethyl biguanide) hydrochloride and trimethylol melamine on textile fabrics were examined. Antibacterial activities of anti-microbial agent treated samples are very good. The reduction ratios against four kinds of colonies are 99.9 % after repeated laundering ten times. Skin patch test results for anti-microbial agent treated samples are almost-negative by Hi-scope judgement and macroscopical judgement.

• Fashion & Textile Research Journal
• /
• v.5 no.1
• /
• pp.64-70
• /
• 2003

Water-insoluble chitosan with molecular weight of 2,000,000, 580,000, 80,000, and 40,000 and more than 90% of degree of deacetylation were prepared to test antibacterial activity of chitosan against a pathogenic bacteria, methicillin resistant Staphylococcus aureus (MRSA). As experimental method, the Shake Flask Method (SFM) and Modified Shake Flask Method (MSFM) were applicated. The anti-microbial activity of chitosan/acetic acid aqueous solution is consistent irrespective of Mw of chitosan. MIC value of SFM measurement was 0.2 ppm, and MIC value of modified SFM measurement was 25 ppm. But MIC value of chitosan/acetic add solution and chitosan treated cotton filter paper was equally 5 ppm. The antibacterial activities of chitosan were different in different test measurements employed. The antibacterial activities of chitosan/acetic acid solution and chitosan treated cotton filter paper were also different. Therefore, it needs to be pointed out that the test measurements of anti-microbial activity have some problems.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.549-554
• /
• 2002

Recently, interest in hygiene has been arouse in the health care field. Consequently, Filters with antibacterial agent applied to improve air quality by sterilizing bacteria, fungi, etc. We actually installed antibacterial air filter containing 2.5wt%Ag zeolite on the air intake route to air-conditioner in passenger cu, and evaluated filter's performance on antibacterial effect. By the microbe liquid spattering method, we found that the antibacterial air filter has notably sufficient antibacterial efficiency against standard strains and wild type strains. Antibacterial effect was observed at whole area of filter media by zone of inhibition test. The evaluation of microbe quantity was conducted through mixing dilution plate culture method. In comparison with ordinary filter, the amount of germs attached on antibacterial air filters was larger. The amount of germs attached on ordinary filters was very small since ordinary filters contained less dust. In comparison in antibacterial air filter with thickness, the amount of germs attached on 9mm filter was smaller than that of on 6mm filter. i.e. thicker filter, superior efficiency.