• 제목/요약/키워드: Anti-vibration design

검색결과 116건 처리시간 0.019초

Influence of structural system measures on the dynamic characteristics of a multi-span cable-stayed bridge

  • Geng, Fangfang;Ding, Youliang;Xie, Hongen;Song, Jianyong;Li, Wanheng
    • Structural Engineering and Mechanics
    • /
    • 제52권1호
    • /
    • pp.51-73
    • /
    • 2014
  • A three-dimensional finite element model for the Jiashao Bridge, the longest multi-span cable-stayed bridge in the world, is established using the commercial software package ANSYS. Dynamic characteristics of the bridge are analyzed and the effects of structural system measures including the rigid hinge, auxiliary piers and longitudinal constraints between the girders and side towers on the dynamic properties including modal frequency, mode shape and effective mass are studied by referring to the Jiashao Bridge. The analysis results reveal that: (i) the installation of the rigid hinge significantly reduces the modal frequency of the first symmetric lateral bending mode of bridge deck. Moreover, the rigid hinge significantly changes the mode shape and effective mass of the first symmetric torsional mode of bridge deck; (ii) the layout of the auxiliary piers in the side-spans has a limited effect on changing the modal frequencies, mode shapes and effective masses of global vibration modes; (iii) the employment of the longitudinal constraints significantly increases the modal frequencies of the vertical bending modes and lateral bending modes of bridge deck and have significant effects on changing the mode shapes of vertical bending modes and lateral bending modes of bridge deck. Moreover, the effective mass of the first anti-symmetric vertical bending of bridge deck in the longitudinal direction of the fully floating system is significantly larger than that of the partially constrained system and fully constrained system. The results obtained indicate that the structural system measures of the multi-span cable-stayed bridge have a great effect on the dynamic properties, which deserves special attention for seismic design and wind-resistant design of the multi-span cable-stayed bridge.

Service Life Prediction of Rubber Bushing for Tracked Vehicles

  • Woo, Chang-Su;Kang, In-Sug;Lee, Kang-Suk
    • Elastomers and Composites
    • /
    • 제55권2호
    • /
    • pp.81-87
    • /
    • 2020
  • Service life prediction and evaluation of rubber components is the foundational technology necessary for securing the safety and reliability of the product and to ensure an optimum design. Even though the domestic industry has recognized the importance thereof, technology for a systematic design and analysis of the same has not yet been established. In order to develop this technology, identifying the fatigue damage parameters that affect service life is imperative. Most anti-vibration rubber components had been damaged by repeated load and aging. Hence, the evaluation of the fatigue characteristics is indispensable. Therefore, in this paper, we propose a method that can predict the service life of rubber components relatively accurately in a short period of time. This method works even in the initial designing stage. We followed the service life prediction procedure of the proposed rubber components. The weak part of the rubber and the maximum strain were analyzed using finite element analysis of the rubber bushing for the tracked vehicles. In order to predict the service life of the rubber components that were in storage for a certain period of time, the fatigue test was performed on the three-dimensional dumbbell specimen, based on the results obtained by the rubber material acceleration test. The service life formula of the rubber bushing for tracked vehicles was derived using both finite element analysis and the fatigue test. The service life of the rubber bushing for tracked vehicles was estimated to be about 1.7 million cycles at room temperature (initial stage) and about 400,000 cycles when kept in storage for 3 years. Through this paper, the service life for various rubber parts is expected be predicted and evaluated. This will contribute to improving the durability and reliability of rubber components.

다축하중이 작용하는 방진고무부품 피로손상 파라미터 결정에 관한 연구 (Study on the Determination of Fatigue Damage Parameter for Rubber Component under Multiaxial Loading)

  • 문성인;우창수;김완두
    • Elastomers and Composites
    • /
    • 제47권3호
    • /
    • pp.194-200
    • /
    • 2012
  • 고무재료는 배합조건에 따라 기계적 거동이 다르기 때문에 피로수명평가를 위해 부품소재에 대한 물성데이터 확보가 선행되어야 한다. 그러나 모든 종류의 배합조건을 고려하여 표준화된 재료물성을 확보하는 것은 현실적으로 불가능하다. 따라서 본 연구에서는 최소한의 제한된 실험으로부터 피로수명평가를 위한 입력물성을 선택하기 위한 방법을 제시하였으며, 피로수명 평가를 위한 최적 피로손상 파라미터를 결정하였다. 이러한 결과를 활용하여 부품의 피로수명 평가결과와 내구시험결과를 비교한 후, 본 연구에서 제안된 피로수명 평가절차의 타당성을 검토하였다.

Galloping characteristics of a 1000-kV UHV iced transmission line in the full range of wind attack angles

  • Lou, Wenjuan;Wu, Huihui;Wen, Zuopeng;Liang, Hongchao
    • Wind and Structures
    • /
    • 제34권2호
    • /
    • pp.173-183
    • /
    • 2022
  • The galloping of iced conductors has long been a severe threat to the safety of overhead transmission lines. Compared with normal transmission lines, the ultra-high-voltage (UHV) transmission lines are more prone to galloping, and the damage caused is more severe. To control the galloping of UHV lines, it is necessary to conduct a comprehensive analysis of galloping characteristics. In this paper, a large-span 1000-kV UHV transmission line in China is taken as a practical example where an 8-bundled conductor with D-shaped icing is adopted. Galerkin method is employed for the time history calculation. For the wind attack angle range of 0°~180°, the galloping amplitudes in vertical, horizontal, and torsional directions are calculated. Furthermore, the vibration frequencies and galloping shapes are analyzed for the most severe conditions. The results show that the wind at 0°~10° attack angles can induce large torsional displacement, and this range of attack angles is also most likely to occur in reality. The galloping with largest amplitudes in all three directions occurs at the attack angle of 170° where the incoming flow is at the non-iced side, due to the strong aerodynamic instability. In addition, with wind speed increasing, galloping modes with higher frequencies appear and make the galloping shape more complex, indicating strong nonlinear behavior. Based on the galloping amplitudes of three directions, the full range of wind attack angles are divided into five galloping regions of different severity levels. The results obtained can promote the understanding of galloping and provide a reference for the anti-galloping design of UHV transmission lines.

냉각용 초음파 웨이브가이드의 진동 특성 (Vibration characteristics of an ultrasonic waveguide for cooling)

  • 김현세;임의수
    • 한국음향학회지
    • /
    • 제39권6호
    • /
    • pp.568-575
    • /
    • 2020
  • 초음파는 다양한 산업 분야에서 널리 사용이 되고 있다. 그 중에 도전적인 분야로 전자부품의 냉각이 있다. 초음파 냉각 기술은 작동 유체로, 기존의 지구온난화를 유발하는 프레온 가스 대신에 Ar(아르곤), N2(질소) 등의 기체로 대체가 가능하다. 또한 움직이는 부품이 없어 높은 내구성을 가질 수 있다. 그러므로 이러한 환경 문제와 내구성 관점에서 초음파 냉각 장치의 개발이 필요하다. 본 논문에서는 설계와 제작 공정에 대하여 설명하고 있다. 이 시스템을 설계할 때, 냉각기 시제품을 이용하여 유효성 테스트를 수행하였다. 이 결과를 바탕으로, ANSYS 프로그램을 사용한 유한요소해석을 수행하였다. 반공진 주파수는 34.8 kHz로 예측이 되었으며, 이는 실험치인 34.6 kHz과 0.6 %의 오차로 잘 일치하였다. 또한 초음파 웨이브가이드의 반공진 주파수는 39.4 kHz로 예측이 되었고, 역시 실험치인 39.8 kHz과 1.0 %의 오차로 잘 일치함을 알 수 있었다. 이러한 결과를 바탕으로 볼 때, 개발된 초음파 웨이브가이드는 마이크로칩의 냉각에 활용 될 수 있을 것으로 보인다.

도시철도 침목플로팅궤도 분기기 망간크로싱의 손상해석 (Damage Analysis of Manganese Crossings for Turnout System of Sleeper Floating Tracks on Urban Transit)

  • 최정열;윤영선;안대희;한재민;정지승
    • 문화기술의 융합
    • /
    • 제8권5호
    • /
    • pp.515-524
    • /
    • 2022
  • 도시철도 침목플로팅궤도(STEDEF)의 분기기는 콘크리트 도상에 매입된 목침목과 침목 하부의 침목방진패드로 구성된 방진궤도로서 침목방진패드의 열화 및 이에 따른 스프링강성의 변화가 침목지지조건의 변화를 초래할 수 있다. 현재 약 21년의 공용기간 동안 발생된 망간크로싱의 손상수량은 전체 부설수량 대비 약 17%로 조사되었으며, 사용 기간 15년 이후(누적통과톤수 약 5.5억톤)부터 손상 물량이 증가하는 것으로 분석되었다. 본 연구에서는 실물 망간크로싱과 차륜의 형상을 모사한 3차원 수치모델을 이용한 매개변수 해석(차륜의 위치, 침목지지조건 및 동적 윤중의 크기)을 수행하여 실제 현장에서 발생된 망간크로싱의 손상유형 및 발생원인을 분석하였다. 연구결과, 노즈부 주변 침목에 뜬침목이 발생된 경우, 설계 궤도충격계수가 적용된 동적윤중 작용 시 노즈부 단면의 발생응력이 항복강도를 초과하였으며, 이는 실제 현장에서 발생된 손상위치와 비교적 잘 일치하는 것으로 분석되었다. 따라서 망간크로싱의 손상을 최소화하기 위해서는 노즈부 주변의 침목지지조건을 일정한 수준으로 유지하고, 손상된 망간크로싱 교체 시에는 침목 하부 경계조건의 균일성 확보를 위해 침목방진패드를 함께 교체하는 것이 바람직할 것으로 분석되었다.