• Journal of electromagnetic engineering and science
• /
• 제5권2호
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• 센서학회지
• /
• 제25권3호
• /
• pp.213-217
• /
• 2016

The superhydrophobic and superoleophobic meshes surfaces have been used in various applications such as self-cleaning, anti-icing, gas exchange, oil-water separation, sound-wave penetrable anti-wetting structures, etc. In particular, there are many studies for oil-water separation with environmental issues. Because of high pressure and dynamic environment, oil-water separation filters must have stable surface properties as super-hydrophobicity and superoleophobicity. The oleophobicity of surface depends on the surface chemistry and roughness of the surface. The roughness of oleophobic surface enhances its static contact angle and stability. The multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state. In this research, we fabricated a superoleophobic mesh with a multi-scale hierarchical structure to increase the pressure resistance and adjusted a size of the mesh hole.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.353-362
• /
• 2014

This study attempted to determine the effects of fermented green tea extracts on hair by using them in a perm. For this, hair is bleached, and then the fermented green tea extracts and water were supplied to the hair using a mist sprayer. Then the hair was permed, and hair damage was tested. Regarding hair moisture levels and wave formation, specifically, the morphological changes of hair were investigated with the Scanning Electron Microscope(SEM). The study results found the following. In terms of wave formation, the fermented green tea extract-based perm was much better than the general perm. In addition, hair bleaching was more serious in the latter. According to analysis on hair moisture using SEM, hair damage was more prevalent in the general perm as well. Therefore, it was confirmed that green tea extract-based perms cause less damage to the cuticle. In other words, the potential of fermented green tea extracts as a hair cosmetics material was discovered. Furthermore, it appears that the study results contribute to the development of low-irritating scalp and hair care products using the anti-inflammatory and antimicrobial properties of the fermented green tea extracts.

• 한국광학회지
• /
• 제7권2호
• /
• pp.142-149
• /
• 1996

대향류버너의 화염에서 연소반응의 중간단계 생성물로 존재하는 OH라디칼의 축퇴 4광자 혼합스팩트럼을 비포화영역에서 Forward Box 형태의 위상정합조건으로 측정하였다. X$^{2}$.PI..rarw.A$^{2}$.SIGMA.$^{+}$ 천이선들 중 R$_{1}$-가지 분광선들의 세기로부터 회전에너지 준위의 밀도분포를 구하고 볼쯔만분포와 비교하여 온도를 구하였다. 흡수분광스펙트럼을 측정하여 화염내에서 레이저의 흡수효과를 보정하여 주었다. 측정된 온도의 오차는 2000K 근방에서 .+-.60K로서 CARS로 얻은 온도와 오차범위내에서 일치하였다. 화염의 여러부분에서 스펙트럼을 측정하여 온도분포와 OH농도분포를 얻었다.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.10-15
• /
• 2013

A ship cruising in the ocean oscillates continuously due to wave action. In order to reduce the ship's roll, we developed a fin stabilizer as an anti-rolling device for a 500-ton-class high-speed marine vessel. During the development phase, it was necessary to set up control gains for the motion and hydraulic systems and assess the effectiveness of the anti-rolling performance on the ground. For this reason, a Target Simulator, which simulated the ship's motion, was given operator inputs such as the engine telegraph and waterjet deflection angle, and generated roll using a one-degree-of-freedom motion base. Hardware-In-the-Loop Simulation (HILS) was performed using the Target Simulator in order to confirm the various logics of the developed fin stabilizer, select initial control gains, and estimate the anti-rolling performance. In conclusion, it was confirmed that HILS was very helpful to develop the fin stabilizer because it could reduce the number of sea trial tests that were needed and could find many malfunctions in the factory a priori.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.159-163
• /
• 2014

More accurate CD (Critical Dimension) control is required for the nanometer-scaled devices. However, since the reflectivity between substrate and PR (Photoresist) becomes higher, the CD (Critical Dimension) swing curve was intensified. The higher reflectivity also causes PR notching due to the pattern of sub-layer. For this device requirement, it was optimized for the thickness, refractive index(n) and absorption coefficient(k) in the bottom anti-reflective coating(BARC; SiON) and photoresist with the minimum reflectivity. The computational simulated conditions, which were determined with the thickness of 33 nm, n of 1.89 and k of 0.369 as the optimum condition, were successfully applied to the experiments with no standing wave for the 0.13um-device. At this condition, the lowest reflectivity was 0.44%. This optimum condition for BARC SiON film was applied to the process for 0.13um-device. The optimum SiON film as BARC to PR and sub-layer could be formed with the accurate CD control and no standing waver for the nanometer-scaled semiconductor manufacturing process.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.664-666
• /
• 2021

안티 드론은 불법적인 드론의 침입 및 활동을 감지하고 차단하는 장치를 의미하며, 불법 드론을 추락시키거나 공중에서 파괴시키는 기술을 포함하는 것으로서, 본 논문은 안티 드론 기술로 원격 드론 탐지에 따른 재밍의 영향성 분석한 것이다. 드론의 거리에 따라 재밍 신호의 영향이 달라질 수 있다. 삼각파의 발생으로 근거리에 있는 드론과 원거리에 있는 드론을 동시에 재밍을 할 수 있는 장점이 있으며, 최대 전력으로 송신하지 않음으로 배터리를 효율적으로 운용할 수 있는 효과가 있다. 또한, 원거리에서 재밍에 대한 영향을 받지 않더라도 근거리에서는 더욱 재밍 영향이 크므로 재밍에 대한 영향을 달리 받을 수 있는 장점이 있다.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.147-153
• /
• 2014

The purpose of this paper is to examine the roll damping characteristics by bilge keels on the fishing vessel. Unlike other degree of freedom motions, roll motion is highly nonlinear. However the quantitative evaluation of roll damping combined with waves is very important for the fishing vessel. To reduce roll motion, roll motion stabilizers such as a bilge keel is used due to easy made and cheap cost rather than anti-rolling tank and fin-stabilizer. Authors paid attention to the shape of bilge keel and waves to grasp the roll damping for the fishing vessel and studied about the difference of tendencies of roll angle following the shapes of bilge keel. The model ship was the offshore large purse seiner and four types of bilge keel were used. The data from the experiments were provided and analyzed to investigate the rolling characteristics of the model ship being affected by the wave height, wave period and bilge keel shape. The results of the study showed that three types of the bilge keel have little effective, but only one has an effect on the roll damping. So bilge keel shape and its attachment method need to be a future study for the practical use in fishing vessel.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1157-1169
• /
• 2008

This paper presents spectral element formulation which approximates Lamb wave propagation by PZT transducers bonded on a thin plate. A two layer beam model under 2-D plane strain condition is introduced to simulate high-frequency dynamic responses induced by a piezoelectric (PZT) layer rigidly bonded on a base plate. Mindlin-Herrmann and Timoshenko beam theories are employed to represent the first symmetric and anti-symmetric Lamb wave modes on a base plate, respectively. The Euler-Bernoulli beam theory and 1-D linear piezoelectricity are used to model the electro-mechanical behavior of a PZT layer. The equations of motions of a two layer beam model are derived through Hamilton's principle. The necessary boundary conditions associated with the electro-mechanical properties of a PZT layer are formulated in the context of dual functions of a PZT layer as an actuator and a sensor. General spectral shape functions of response field and the associated boundary conditions are obtained through equations of motions converted into frequency domain. Detailed spectrum element formulation for composing the dynamic stiffness matrix of a two layer beam model is presented as well. The validity of the proposed spectral element is demonstrated through numerical examples.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.62-71
• /
• 2008

액체로켓엔진에서 발생하는 고주파 연소불안정을제어하기 위하여 인젝터의 길이 변화를 줄 수 있는 다중 스월 인젝터의 감쇠효과를 분석하였다. 음향흡수자로서 인젝터의 효과를 분석하기 위하여 인젝터는 1/4 파장 공명기로 해석하였고, 상온에서 감쇠 효과의 적합성을 검증하였다. 인젝터 내부에 형성되는 air core의 부피가 감쇠 효과에 직접적인 영향을 주므로 이를 모사한 다수의 튜브로 실험을 하였다. 실험을 통해 각 모드의 배(anti-node point)에 장착된 인젝터의 수의 증가로 감쇠 효과가 커지는 것을 확인하였다. 또한 1L, 1T, 1L1T 모드에 동조된 인젝터들을 동시에 각 모드의 배에 장착했을 경우, 각 모드에서 단일 모드에 튜닝된 인젝터들을 장착하였을 경우와 거의 같은 감쇠 효과를 얻을 수 있었다.