• Tuberculosis and Respiratory Diseases
• /
• v.65 no.4
• /
• pp.334-338
• /
• 2008

Solitary fibrous tumors of the pleura (SFTPs) are relatively rare tumors that originate from the mesenchymal cells of the submesothelial tissue of the pleura. Patients with SFTPs are often asymptomatic, while some patients experience pleuritic chest pain, cough and/or dyspnea. We report here on a case of SFTP, and the patient presented with septic shock and respiratory failure that required mechanical ventilation. A 68-year-old woman was admitted for the evaluation of her dyspnea and generalized edema. Chest imaging studies showed an 18 cm-sized voluminous mass occupying the right thoracic cavity with anterior displacement of hilar structures and atelectasis of the right lung. Immediately after admission, she developed pneumonia and septic shock that required antibiotics and mechanical ventilation. She displayed a partial response to medical treatment, and then complete excision of the tumor was performed and the pathologic examination revealed benign SFTP. Afterward, she fully improved without evidence of recurrence until now.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.463-498
• /
• 1990

전기적 자극에 의한 골성장기전의 개념을 이용하여 임상적 효율성을 증진시키기 위한 연구는 현재 교정학을 비롯한 치과영역에서 활발히 진행되고 있는 분야 중의 하나이다. 전기적 자극의 여러 형태 중의 하나인 전자기장과 하악의 기능적 전방 이동을 유도하는 악기능교정장치가 백서의 하악과두 성장에 미치는 영향을 구명하기 위하여 본 연구를 시행하였다. 생후 4주된 Sprague Dawley계 백서 48마리를 대조군 12마리, 실험군 36마리로 나누고, 실험군은 다시 전자기장을 가한 군, 하악골 전방이동 장치를 장착시킨 군, 전자기장과 하악골 전방이동 장치를 병용시킨 군으로 분류하여 각각 12마리씩 실험동물을 배정하였다. 각 군의 실험동물은 15 HZ의 특수 전자기장이나 하악전방이동 자치가 하루10시간씩 작용되도록 특별히 제작한 실험장치 속에 넣어 1주간, 4주간씩 사육하여 희생시킨 후 하악골을 분리하고 연조직을 박리한 후 $10\%$ formalin에 보관하였다. 하악골 길이를 측정하기 위해 0.05mm까지 계측 가능한 캘리퍼를 이용하여 하악과두의 후연에서 이공까지의 거리를 계측하였고, 하악과두를 절제하여 0.5M EDTA에 탈회시켜 파라핀 포매를 하였다. 표본의 절단방향은 시상평면에 평행하게 하여 $6{\mu}m$두께로 연속절단 하였으며, 그 중 중심의 3절편을 취하여 통법에 의한 H-E 중염색을 시행하였다. 하악골 계측과 H-E 중염색 표본을 통한 조직학적 관찰을 통해 다음과 같은 결론을 얻었다. 1. 4주군에서 전자기장만에 노출된 실험군은 대조군에 비해 하악골 길이가 유익성 있게 증가되었다. 2. 전자기장과 하악골 전방이동 장치를 병용한 실험군은 하악골 전방이동장치만을 사용한 실험군에 비하여 하악골 길이가 증가되었다. 3. 전자기장에 노출된 실험군은 전구 연골아세포(prechondroblast)의 증식, 비대연골 세포층의 세포간질 및 연골내 골화층의 석회화가 모두 증가되었다. 4. 본 실험에 사용한 15 HZ전자기장의 주요작용부위는 백서의 하악과두 성장지역 중 연골내 골화의 석회화 지역이며, 또한 이는 하악골 전방이동 장치와 병용시 하악과두 성장을 촉진시킬 수 있음이 관찰되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.3
• /
• pp.217-227
• /
• 1992

The purpose of this paper is to investigate changes in soft tissue in 22 patients treated by vertical ramus osteotomy and sagittal split ramus osteotomy for the correction of mandibular prognathism. 22 individuals, 12 males and 10 females, were selected from the patients with mandibular prognathism at the Department of Oral and Maxillofacial Surgery, Colledge of Dentistry, Kyung Hee University. Patient were analyzed with cephalogram taken 1 week before and at least 6 weeks after surgery under the same condition. Measurements were made constructed hard tissue and sop tissue points located on each before-and-after film tracing. Comparision were made of these figures to estimate the amount that the soft tissue followed the hard tissue structures in each surgical procedure : ratio of sop and hard tissue changes were formulated. The results were as follows. 1. The horizontal changes of Pogs and Bs as a ratio of the horizontal changes of Pog and B point were 1.02 and 1.16 respectively. 2. One millimeter of posterior changes at Pog resulted in 0.86mm of posterior change at Li and 0.09mm of posterior change at Ls. The greatest amount of sop tissue change occurred at Pogs, with substantially less posterior displacement at Bs, even less at Li and at least at Ls. 3. The ratio of LI to Li was 1:0.81 and the ratio of LI to Ls was not significant.(1 : 0.17) 4. The ULA(Cm-Sn-Ls) and the relative lower lip projection (LLP) was incnease4 but the relative upper lip projection (ULP) was slightly decreased 5. The angular change of the upper lip inclined angle (Ls-Sn/ANS-PNS) and lower lip inclined angle(Li-Pogs/Me-Go) expressed as a ratio of the posterior change of Pog were 0.57 and 0.20 respectively. 6. The ratio of the lower anterior facial height change of the soft tissue(Sn-Mes) to the hard tissue(ANS-Gn) were 0.78 and and the ratio of vertical height changes of the hard tissue and sop tissue to the posterior change of the Pog were 0.18 and 0.19 respectively. 7. The sop tissue angular change of facial convexity(G-Sn-Pogs) expressed as a ratio of the angular change of the hard tissue angle of facial convexity(N-A-Pog) was 1.24.

• The korean journal of orthodontics
• /
• v.35 no.2 s.109
• /
• pp.137-147
• /
• 2005

The purpose of this study was to investigate the stress distribution in the periodontal tissue and the displacement of teeth when active torque was applied to the maxillary incisors by three-dimensional finite element analysis A three-dimensional finite element model consisted of the maxillary teeth and surrounding periodontal membrane, $.022{\times}.028$ Roth prescription bracket and stainless steel, NiTi and TMA rectangular ideal arch wires which were modeled by hexahedron elements. Applied active torques were 2, 5 and 10 degrees ThHe findings of this study showed that the reaction force acting or the bracket was the extrusion force on the mesial side of the incisors and canine and the intrusion force on the distal side of the incisors and canine. The amount of force and moment was greatest at the lateral incisor. When active anterior labial crown torque was applied. labial crown and distal tipping and Intrusion of the incisors took place. and lingual crown distal tipping and extrusion of the canine occured. An excessive force was concentrated on the lateral incisor, when the stainless steel wire was used NiTi or TMA wire is desirable for torque control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.771-782
• /
• 2017

This paper describes the development of a wearable robot to assist ankle power for the elderly. Previously developed wearable robots have generally used motors and gears to assist muscle power during walking. However, the combination of motor and reduction gear is heavy and has limitations on the simultaneous control of stiffness and torque due to the friction of the gear reducer unlike human muscles. Therefore, in this study, Mckibben pneumatic muscle, which is lighter, safer, and more powerful than an electric motor with gear, was used to assist ankle joint. Antagonistic actuation using a pair of pneumatic muscles assisted the power of the soleus muscles and tibialis anterior muscles used for the pitching motion of the ankle joint, and the model parameters of the antagonistic actuator were experimentally derived using a muscle test platform. To recognize the wearer's walking intention, foot load and ankle torque were calculated by measuring the pressure and the center of pressure of the foot using force and linear displacement sensors, and the stiffness and the torque of the pneumatic muscle joint were then controlled by the calculated ankle torque and foot load. Finally, the performance of the developed ankle power assistive robot was experimentally verified by measuring EMG signals during walking experiments on a treadmill.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1060-1068
• /
• 2018

Study Design: Retrospective study. Purpose: Lumbar intervertebral disc degeneration is an important cause of low back pain. Overview of Literature: Spinal fusion is often reported to have a good course for adolescent idiopathic scoliosis (AIS). However, many studies have reported that adjacent segment degeneration is accelerated after lumbar spinal fusion. Radiography is a simple method used to evaluate the orientation of the vertebral column. magnetic resonance imaging (MRI) is the method most often used to specifically evaluate intervertebral disc degeneration. The Pfirrmann classification is a well-known method used to evaluate degenerative lumbar disease. After spinal fusion, an increase in stress, excess mobility, increased intra-disc pressure, and posterior displacement of the axis of motion have been observed in the adjacent segments. Methods: we retrospectively secured and analyzed the data of 15 patients (four boys and 11 girls) with AIS who underwent a spinal fusion surgery. We studied the full-length view of the spine (anterior-posterior and lateral) from the X-ray and MRI obtained from all patients before surgery. Postoperatively, another full-length spine X-ray and lumbosacral MRI were obtained from all participants. Then, pelvic tilt, sacral slope, curve correction, and fused and free segments before and after surgery were calculated based on X-ray studies. MRI images were used to estimate the degree to which intervertebral discs were degenerated using Pfirrmann grading system. Pfirrmann grade before and after surgery were compared with Wilcoxon signed rank test. While analyzing the contribution of potential risk factors for the post-spinal fusion Pfirrmann grade of disc degeneration, we used generalized linear models with robust standard error estimates to account for intraclass correlation that may have been present between discs of the same patient. Results: The mean age of the participant was 14 years, and the mean curvature before and after surgery were 67.8 and 23.8, respectively (p<0.05). During the median follow-up of 5 years, the mean degree of the disc degeneration significantly increased in all patients after surgery (p<0.05) with a Pfirrmann grade of 1 and 2.8 in the L2-L3 before and after surgery, respectively. The corresponding figures at L3-L4, L4-L5, and L5-S1 levels were 1.28 and 2.43, 1.07 and 2.35, and 1 and 2.33, respectively. The lower was the number of free discs below the fusion level, the higher was the Pfirrmann grade of degeneration (p<0.001). Conversely, the higher was the number of the discs fused together, the higher was the Pfirrmann grade. Conclusions: we observed that the disc degeneration aggravated after spinal fusion for scoliosis. While the degree of degeneration as measured by Pfirrmann grade was directly correlated by the number of fused segments, it was negatively correlated with the number of discs that remained free below the lowermost level of the fusion.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.133-145
• /
• 2023

Class III malocclusion with mandibular protrusion can be divided into skeletal and pseudo malocclusion due to tooth displacement. For skeletal malocclusion, favorable treatment results can be obtained by establishing an appropriate vertical and horizontal intermaxillary relationship in order to secure a restoration space and obtain aesthetic and functional results. In this case, complete mouth rehabilitation was performed using an implant and a fixed prosthesis in a patient with mandibular protrusion and anterior teeth wear and reduced occlusal vertical dimension. After cast analysis and digital diagnosis, a provisional restoration with increased vertical dimension was fabricated to secure posterior support and evaluate stable centric occlusion. With the definitive prosthesis reflecting the provisional restoration, favorable function and aesthetics were obtained.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.4
• /
• pp.185-193
• /
• 2023

Objectives This study was conducted to find out the correlation between lumbar malposition and lumbar disc herniation. Methods Among the patients who visited Gwangju Jaseng Hospital of Korean Medicine from January 2019 to January 2021, taking 92 patients under age 60 who had the records of X-rays and magnetic resonance imaging (MRI) images as the research subjects, Cobb's angle was measured in anterior-posterior (AP) view and lateral (LAT) view, the number of displacements was scored by listing categories defined by The Korean Society of Chuna Manual Medicine for Spine and Nerves. The degree of lumbar intervertebral disc herniation was expressed as a percentage according to the method of Kato, etc., and the correlation between each factor was analyzed. Results AP curvature and MRI herniation index showed significant positive correlation in L4-L5 level but there was no significant difference in L5-S1 level. LAT curvature and MRI herniation index had no correlation in L4-L5 level, but there was a significant negative correlation in L5-S1 level. Malposition score and MRI herniation index had a significant positive correlation in L5-S1 level, whereas there was no correlation in L4-L5. Conclusions As a result of the study, AP curvature and MRI herniation index showed a significant positive tendency in L4-L5 lumbar spine, and LAT curvature and MRI herniation index showed a significant negative tendency in L5-S1 lumbar spine. Malposition score and MRI herniation index were found to have a significant positive tendency in L5-S1 lumbar spine.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.8-13
• /
• 2009

Purpose: We used tibialis allograft for the reconstruction of ACL and used Hybrid femoral fixation utilizing $Endobutton^{(R)}$ and $Rigidfix^{(R)}$ for femoral fixation, and used $Retroscrew^{(R)}$ and additional fixation for tibial fixation to evaluate the clinical results. Materials and Methods: The ACL reconstruction were performed from February 2004 to February 2007 utilizing Hybrid femoral fixation and $Retroscrew^{(R)}$ and 32 patients, 32 cases which were available for year-long observation (12 to 25 months). The clinical results (Lysholm knee score, IKDC grade) and the radiologic results(bone tunnel expansion, Telos anterior displacement test) were evaluated. Results: The Lysholm knee score was improved from the average of $67.9{\pm}5.4$ points (range: 51~77) before operation and to $94.1{\pm}6.8$ points (range: 68~98) at the last follow up (p<0.05). 22 cases (69%) were evaluated normal (A), 9 cases (28%) were evaluated nearly normal (B) and only 1 case (3%) was evaluated not normal (C) at IKDC final evaluation and no case was evaluated abnormal. From $Telos^{(R)}$ stress x-ray evaluation, difference from the opposite knee was improved average 13.2 mm{\pm}5.8 (range: 6~21 mm) to average $3.4\;mm{\pm}2.8$ (range: 0~11 mm) after operation (p<0.05). The femoral and tibial tunnel were widened by 18.7% and 9.6% in the AP view and 12.4% and 8.5% in the lateral view, respectively (p<0.05). However, any statistic significance was not observed between bone tunnel expansion and knee joint functions (p>0.05). Conclusion: An ACL reconstruction with tibialis allograft using Hybrid femoral fixation and $Retroscrew^{(R)}$ enabled anatomical fixation of the graft tendon with satisfactory clinical results.