• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1053-1060
• /
• 2019

The satellite antenna for collecting information is mainly classified into reflector antenna, lens antenna, and phased array antenna. Among them, the phased array antenna with the excellent antenna pattern control performance for a multi-beam system is frequently used. Although the terrestrial signal information collection based on the satellite is not much effected geographically, it requires the accurate angle-of-arrival (AOA) information of the interesting signal. In this paper, we discuss the characteristics and the advantages/disadvantages of the antenna array shape employed in the phased array antenna. In addition, we present the Cascade AOA estimation algorithm based on a square array antenna mounted on the satellite receiver, and show the performance evaluation results through the computer simulation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

The Objective of this work was to design Composite Antenna Structures (CAS) and investigate impact behavior of CAS which was various curvature. This term, CAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constants and tangent loss as well as mechanical properties. For the antenna performance, microstrip antenna layers inserted into structural layers were designed for satellite communication at the resonant frequency of 12.5 GHz and final demonstration article was. After making five kinds of curved CAS, which radii of curvature are flat, 200, 150, 100, 50 mm. The antenna performance changed in accordance with variation of curvature. The Reflection coefficient was independent of curvature but the gain decreased with the radius of curvature. The impact test equipment was Dyna-8250 drop weight tester. The impact characteristic in accordance with curvature is maximum absorb energy is same each other. The impact energy was 8.5 J. For various Impact energy test, five energy levels 3 J, 5 J, 7 J, 10 J, 20 J were used. The performance of impact damaged antenna was estimated by measuring the return loss and the radiation pattern. It was revealed that the performance of antenna was not related to the impact damage. Because the impactor did not damage the patch directly. CAS have good impact stability for the antenna performance.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.189-196
• /
• 2011

In order to subsitute for the normal mode helical wire antenna, bent monopole antenna combined with a helical structure is proposed as a kind of printed antenna. The antenna which can be operated at 418MHz has been simulated and designed by use of a commercial EM simulator Microwave Studio(MWS). It has been observed that the proposed antenna has good agreements between simulated results and measured results such as the return loss and the radiation pattern. The proposed antenna has been applied practically to the wireless remote controller operationg at 418MHz. It has been observed that the use of the proposed antenna result in similar antenna performance from view point of radiation power when compared with the use of the previous normal mode helical antenna.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.536-548
• /
• 2019

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at ${\lambda}/64$, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz-3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a $4{\times}4$ BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four-conventional monopole antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.98-105
• /
• 2013

This paper presents a finite-difference time-domain(FDTD) simulation and a data processing technique for radar sensing of the internal structure of a wall using an ultra-wide band antenna. We first designed an ultra-wide band anti-podal vivaldi antenna with a frequency range of 0.3~7 GHz which is chosen to be relatively low after considering the characteristics of wave attenuation, wall penetration, and range resolution. In this study the two-dimensional FDTD technique was used to simulate a wall-penetration-radar experiment under practical conditions. The next, the measured radiation pattern of the practical antenna is considered as an equivalent source in the FDTD simulation, and the reflection data of a concrete wall and targets are obtained by using the simulation. Then, a data processing technique has been applied to the FDTD reflection data to get a radar image for remote sensing of the internal structure of the wall. We compared the two different source excitations in the FDTD simulation; (1) commonly-used isotropic point sources and (2) polynomial curve fitting sources of the measured radiation pattern. As a result, when we apply the measured antenna pattern into the FDTD simulation, we could obtain about 2.5 dB higher signal to noise level than using a plane wave incidence with isotropic sources.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1206-1212
• /
• 2005

In this paper, we propose a novel antenna structure which uses the electric and magnetic currents so as to eliminate nulls on their radiation pattern. The tag antenna was matched to the conjugate impedance of the commercial tag chip using the modified double T matching network. The radiation efficiency is about $90\%$, and the bandwidth($S_{11}< -10 dB$) is 848${\~}$926 MHz. Also it shows the gain deviation between the maximum and minimum gains about 4 dB at any direction of the tag antenna at the operating frequency. The readable range of the tag is 1.7${\~}$2.4 m for an arbitrary rotation angle of the tag with a commercial tag chip.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.592-600
• /
• 2014

This paper proposes an enhanced adaptive genetic algorithm(EAGA) dedicated to pattern synthesis of array antenna which conforms to a curved surface of rotation with quadratic function. EAGA combines adaptive genetic algorithm(AGA) with invasive weed optimization(IWO) for the faster convergence and the lower cost value of the cost function. The amplitude and phase of each excited weighting factor are optimized to meet the required goals using EAGA. The EAGA results indicate that the proposed algorithm is superior to AGA when applied to the problem of conformal array antenna pattern synthesis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1036-1043
• /
• 2016

In this paper, an analysis about the elevation angle accuracy degradation of an APAR(Airport Precision Approach Radar) due to the multi-path effect using a phased array antenna was performed. An APAR installed around a runway of airport will be continuously affected in a runway surface of the fixed environment. In this paper, an analysis about the elevation angle accuracy degradation of APAR due to the multi-path effect of runway surface was conducted through a calculation of monopluse slope and sum/difference beam pattern analysis of array antenna. Also, a difference pattern for monopulse to minimize this degradation was optimized in an appropriate configuration to improve a elevation angle accuracy. Finally, a degree of improvement of elevation angle accuracy was confirmed by calculating a monopulse slope including the ground reflection after applying optimized difference patterns of array antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.636-644
• /
• 1999

Experimental and simulation results are presented on the Aperture-Coupled microstrip patch antennal with U-shaped slot. Experiment and simulation results include impedance bandwidth, copolar and crosspolar-pattern characteristics and gain measurements. Simulation results show the advantages of U-slotted patch antenna comparing with the normal patch antenna. More than 35% impedance bandwidth is obtained with reasonably restricted cross-polar radiation pattern. The U-slotted radiation element fed by aperture-coupling method can be more easily extended to array structure, compared with that fed by coaxial cable.