• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.444-450
• /
• 2008

This paper studies the performance of multiuser data networks with transmit diversity under correlated fading channels. Previous work shows that correlated fading reduces the link performance of multiple antenna systems, but how correlated fading affects the throughput of multiuser data networks is still unknown since the throughput depends not only on the link performance but also on the multiuser diversity. We derive the throughput of the multiuser data networks with various transmit diversity schemes under correlated fading channels. The impact of correlated fading on the throughput is investigated. Analytical and simulation results show that, although correlated fading is harmful for link performance, it increases the throughput of the multiuser data networks if the transmit scheme is appropriately selected.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.213-219
• /
• 2006

Interference occurs by signals received from directions that were different from the signals of the users in a mobile communication system. Various studies have been undertaken, including diversity, equalizer, etc., in order to reduce interference. In this study, the weighted value of the array antenna was obtained to improve signal-to-noise ratio. The weighted value was obtained as an eigen value and an eigen vector by using the correlation coefficient of the signal. The weighted value obtained was then applied to the CDMA system to increase system performance and capacity. Both QPSK and OQPSK modulation systems were applied to analyze performance.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.826-835
• /
• 2014

Recently, spatial modulation (SM) schemes are considered to improve the reception performance in spatially correlated channel environments. SM schemes utilize a switching method between multiple transmitters to reduce the correlation among multiple transmitters to reduce the correlation of each received signals and can support transmission additional bits using antenna combinations without extra bandwidth. Therefore, SM schemes can overcome correlation interference of conventional MIMO in urban wireless channels. However, the performance comparisons between SM schemes are not yet performed in correlated urban wireless channels. In this paper, some representative SM schemes are compared and a suitable SM-MIMO system in correlated urban wireless channels is proposed.

• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.437-443
• /
• 2005

The Solar Radio Burst Locator (SRBL) is a spectrometer that can observe solar microwave bursts over a wide band (0.1-18 GHz) as well as detect the burst locations without interferometry or mechanical scanning. Its prototype has been operated at Owens Valley Radio Observatory (OVRO) since 1998. In this study, we have evaluated the capability of the SRBL system in flux and radio burst location measurements. For this, we consider 130 microwave bursts from 2000 to 2002. The SRBL radio fluxes of 53 events were compared with the fluxes from USAF/RSTN and the burst locations of 25 events were compared with the optical flare locations. From this study, we found: (1) there is a relatively good correlation (r = 0.9) between SRBL flux and RSTN flux; (2) the mean location error is about 8.4 arcmin and the location error (4.7 arcmin) of single source events is much smaller than that (14.9 arcmin) of multiple source events; (3) the minimum location error usually occurred just after the starting time of burst, mostly within 10 seconds; (4) there is a possible anti-correlation (r = -0.4) between the pointing error of SRBL antenna and the location error. The anti-correlation becomes more evident (r=-0.9) for 6 strong single source events associated with X-class flares. Our results show that the flux measurement of SRBL is consistent with that of RSTN, and the mean location error of SRBL is estimated to be about 5 arcmin for single source events.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.837-847
• /
• 2015

In this paper, the reception performance of spatial modulation multiple-output multiple-input (MIMO) is analyzed for high speed terrestrial broadcasting. The MIMO scheme is required to reduce the inter symbol interference (ISI) and spatial correlation. The spatial modulation scheme solves the problem of ISI, but the spatial correlation degrades the reception performance of SM scheme. The space-time block coded spatial modulation (STBC-SM) is combined the SM system with space-time block code (STBC) for reducing the effects of the spatial correlation. However, the STBC-SM scheme degrades the spectral efficiency by transmitting same data in the two symbol period. The double space-time transmit diversity with spatial modulation (DSTTD-SM) scheme transmits the data with full antenna combination. To adapt these SM MIMO systems into the terrestrial broadcasting system, the reception performance is analyzed using computer simulation in SUI channel environments.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.648-656
• /
• 2009

We perform an analysis of the characteristics of the time-reversal pulse in Rayleigh or Ricean fading channel environments. We verify it by using Monte Carlo simulation. In a time-reversal system, each antenna in the time-reversal array receives signals from the transmitter and reverse the received signal in the time axis and then resend it to the original transmitter. We assume that the channel characteristics varies very slowly and the spatial separation between the antennas is not large. Hence the signals received by each antenna are correlated. In this paper, the effect of the correlation on the time-reversed pulse is examined, which includes the spatial properties of the time-reversal pulse such as the focus size, and spatial power distribution.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.47-52
• /
• 2003

Ferromagnetic tunnel junctions were fabricated by dc magnetron sputtering and plasma oxidation process. The local transport properties of the ferromagnetic tunnel junctions were studied using contact-mode Atomic Force Microscopy (AFM) and the local current-voltage analysis. Tunnel junctions with the structure of sub./Ta/Cu/Ta/NiFe/Cu/Mn$\_$75/Ir$\_$25//Co$\_$70/Fe$\_$30//Al-oxide were prepared on thermally oxidized Si wafers. Al-oxide layers were formed with microwave excited plasma using radial line slot antenna (RLSA) for 5 and 7 sec. Kr gas was used as the inert gas mixed with $O_2$ gas for the plasma oxidization. No correlation between topography and current image was observed while they were measured simultaneously. The local current distribution was well identified with the distribution of local barrier height. Assuming the gaussian distribution of the local barrier height, the ferromagnetic tunnel junction with longer oxidation time was well fitted with the experimental results. As contrast, in the case of the shorter time oxidation junction, the current mainly flow through the low barrier height area for its insufficient oxygen. Such leakage current might result in the decrease of tunnel magnetoresistance (TMR) ratio.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.29-34
• /
• 2008

In this paper, we propose the channel sounding scheme which improves the reliability and performance of communication link and mitigate the fading effect of channel in MTMO-OFDM system having correlation between Tx and Rx antennas. And we estimate the channel propagation characteristics of channels between the transmitter and receiver with CS scheme by measuring the channel propagation characteristics using sounding signal. Multi agent system models can be used to analyze the path of the system within any time frame. Further, using this proposed method, we can increase the channel capacity by simple calculation in receiver and transmitter and allocate the optimal power by channel information in transmitter. Also, the increment of channel capacity using the prorposed method is induced as the number of antenna is increased. So, we can anticipate the performance improvement with the presented scheme in more complicated Tx and Rx antenna system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.505-514
• /
• 2014

The effects of reflected wave of the sea on pseudolite ranging accuracy are analysed in this paper, when a pseudolite navigation system is used for wide area outdoor applications such as aircraft and vessels positioning. Methods for minimizing the influence of sea surface reflection wave were proposed. The methods include the appropriate correlator in pseudolite navigation system through the correlation performance comparison analysis in receiver design, the use of the technology of multiple antennas, and locating the transmitting station antenna on an appropriate position. From the results of experiments, the method of locating the antenna position shows the most reliable performance against the effect of surface reflection wave. The analysis results of the ranging accuracy improvement are addressed, when the multipath caused by sea surface reflection exists.