• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.83-91
• /
• 2016

ISG (Idle Stop & Go) 시스템이 적용되는 자동차에 적합한 납축전지를 개발하기 위해 전극재료인 3BS ($3PbO{\cdot}PbSO_4{\cdot}H_2O$)와 4BS ($4PbO{\cdot}PbSO_4$)의 생성조건과 활물질의 화성 방법에 따른 납축전지 초기 성능과 심방전에 미치는 영향에 대해 연구 하였다. 양극과 음극 활물질을 숙성반응 중 온도 제어로 최종 생성 활물질의 상이 변하며, 납축전지의 수명에 영향을 미친다는 것을 알 수 있었다. 초기 성능에는 3BS 활물질을 적용한 AGM 납축전지와 Flooded 납축전지가 우수한 성능을 나타내는 반면 4BS 활물질을 적용한 AGM 납축전지는 상대적으로 낮은 성능을 나타내었다. 또한, 활물질 화성 효율을 비교분석하기 위해 화성을 3 step과 9 step으로 구분하여 시험한 결과, 3BS로 제작된 AGM 납축전지에 비해 4BS 활물질을 적용한 AGM 납축전지의 초기 성능이 우수 하였다. DOD17.5% 수명시험으로 수명성능을 비교한 결과, 잦은 심방전이 요구되는 ISG 시스템에서 Flooded 납축전지는 적합하지 않았으나, AGM 납축전지는 적합한 결과를 나타내었다. 결론적으로 AGM 납축전지가 ISG 시스템 적용 자동차에 적합하였고, AGM 납축전지의 숙성, 화성 방법에 따라 수명 성능이 80% 차이를 나타내는 것으로 확인되었다.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.43-49
• /
• 2005

This paper is to investigate the effect of corrosion by acoustic emission method in tensile loading and the adhesiveness between substrate and coating layer. The powders used are Zn and Amdry625, respectively. They are coated on brass alloy substrate. AE signals of Zn and Amdry625 coating layer increase drastically in strain $2\%$. However, those of Zn specimen have more than those of Amdry625 specimen. When the specimens executed the corrosion test under $3.5\%$ NaCl solution for 500, 1000 hours, the salt solution penetrated into the surface of the substrate through the pores of the coating layer. As a result, corrosion production formed on the surface of the substrate. The adhesiveness between coating layers is weakened by the polarization and corrosion itself. The AE event, count, and energy of corroded coating specimens decrease, compared to specimens without corrosion. The results are summarized as follows : 1. In the tensile tests, the time that it took to start and develop the cracks and exfoliations between the surface of the substrates and the plasma spray coatings were different according to the type of plasma sprayed material, which are Zn and Amdry625. These phenomena were obvious at the strain rate 1 to $5\%$, and few available data were found after that stage. 2. The specimens with Zn coating showed the characteristics of crack, according to the changes of the tensile strength applied on the substrates while those with Amdry625 showed exfoliation as a result of low adaptation to the tensile strength. 3. The anti-corrosion specimens showed that the adhesive properties between the substrate and the plasma spray coating were strong in the order of Zn, Amdry. It showed that Corroded specimens cracked or exfoliated easily, even with the small energy, because those had a comparatively weakened adhesive property, due to corrosion. 4. Zn specimen showed no corrosion phenomena on the surface of the substrates, because they had the function of sacrifice anode however, Amdry625 specimen showed the corrosion, because it did not have that function.

• 한국가스학회지
• /
• 제26권6호
• /
• pp.16-23
• /
• 2022

본 연구에서는 디스크와 인장시험 등을 통해 수소취성에 대한 재료 특성을 평가하고자 하였다. 이를 위해 니켈 당량이 28.5 이상인 합금 조성과, 이와 유사한 상용 합금 조성 2종에 대해 합금을 제조하였고, 각 합금은 진공유도용해로(Vacuum Induction Melting, VIM)에서 개발 합금(이하 #1)과 상용 배관(이하 각각 #2, #3)을 재용해하여 주조재로 제조하였고, 주조 합금은 단조 및 압연하여 판재로 제조하였다. 디스크형태의 시편은 0.1~1000 bar/min의 속도로 수소와 헬륨으로 가압하여 파열압력을 측정하여 수소에 대한 특성을 평가하였고, 전기화학적 방법으로 수소처리한 인장시편과 비교군에 대해 항복강도, 인장강도, 연신률, 단면적 감소율을 확인하였다. 또한 인장시편은 주사전사현미경을 통해 파단면을 확인하였다. 디스크파열시험과 수소처리 한 시편의 인장시험을 통해, 본 연구를 통해 개발된 강종의 경우 상용 강종과 비교하여 유사한 수소취성 특성을 갖고 있음을 확인하였고, 파단면 또한 미세한 두께의 벽개파괴 특성을 보였지만 기계적 강도에 큰 영향을 미치지 않음에 따라 개발된 고질소 스테인리스강은 내수소취성이 우수한 것으로 평가 할 수 있었다.

• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• 전기화학회지
• /
• 제10권1호
• /
• pp.25-30
• /
• 2007

고분자전해질 연료전지의 성능은 cell 온도, 전체 압력, 반응 기체의 부분 압력 상대습도와 같은 다양한 요인들에 의해 영향을 받는다. 이온화된 수소 이온은 $H_3O^+$의 형태로 membrane을 통과하여 물을 생성하는 반응으로 전기를 발생시킨다. 대용량 연료전지에서는 부수적으로 생성되는 열을 제거하거나 다른 용도로 사용할 목적으로 냉각시스템이 필요하다. 냉각수의 전도도가 상승할 경우에 연료전지에서 발생된 전류의 일부가 냉각수를 통하여 누설되어 연료전지의 성능을 감소시킬 수 있다. 본 연구에서는 3차 증류수와 ethylene glycol이 함유되어 있는 부동액을 사용하여 저항 수치 변화를 관찰하는 실험을 수행하였다. 3차 증류수의 경우 저항값이 설정치 이하로 내려가는데 약 28일이 소요되었고, 연료전지의 운전에 의한 영향은 관찰되지 않았다. 부동액을 냉각수로 사용한 경우는 43일이 지나도 저항값이 설정치 이하로 내려가지는 않았지만, stack 분리판의 접착부에 이상이 생긴 것으로 추정되는 연료전지의 성능 저하가 발생하여 전도도 실험을 중단하였다. 고분자전해질 연료전지에서는 수소이온의 이온전도성 저하를 방지하기 위하여 외부에서 가습하여 주는 방식이 일반적이지만, 소용량 연료전지에서는 무가습 조건을 적용하여 연료전지의 효율을 높이고 제작단가도 경감할 수 있다. 이를 위하여 저가습 및 무가습 실험을 수행하였으나 대용량 연료전지에서는 양측 무가습인 경우에 $50{\sim}60^{\circ}C$ 이상의 고온에서 성능이 발현되기 어려운 것으로 관찰되었다. 냉각수의 유량을 다르게 하여 실험을 수행한 경우에는 0.78L/min과 같은 낮은 유량에서 출구온도와 입구온도를 측정하여 본 결과 두 온도 사이에 ${\Delta}T$가 다른 유량에서보다 크게 발생하여 성능이 감소된 것으로 사료된다. 이와 같이 냉각수의 온도와 유량을 다르게 하여 양측 무가습 실험을 수행한 결과, 연료전지의 성능이 cell 온도에 직접적인 연관이 있는 것으로 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.100-101
• /
• 2012

The plasma damage free and room temperature processedthin film deposition technology is essential for realization of various next generation organic microelectronic devices such as flexible AMOLED display, flexible OLED lighting, and organic photovoltaic cells because characteristics of fragile organic materials in the plasma process and low glass transition temperatures (Tg) of polymer substrate. In case of directly deposition of metal oxide thin films (including transparent conductive oxide (TCO) and amorphous oxide semiconductor (AOS)) on the organic layers, plasma damages against to the organic materials is fatal. This damage is believed to be originated mainly from high energy energetic particles during the sputtering process such as negative oxygen ions, reflected neutrals by reflection of plasma background gas at the target surface, sputtered atoms, bulk plasma ions, and secondary electrons. To solve this problem, we developed the NBAS (Neutral Beam Assisted Sputtering) process as a plasma damage free and room temperature processed sputtering technology. As a result, electro-optical properties of NBAS processed ITO thin film showed resistivity of $4.0{\times}10^{-4}{\Omega}{\cdot}m$ and high transmittance (>90% at 550 nm) with nano- crystalline structure at room temperature process. Furthermore, in the experiment result of directly deposition of TCO top anode on the inverted structure OLED cell, it is verified that NBAS TCO deposition process does not damages to the underlying organic layers. In case of deposition of transparent conductive oxide (TCO) thin film on the plastic polymer substrate, the room temperature processed sputtering coating of high quality TCO thin film is required. During the sputtering process with higher density plasma, the energetic particles contribute self supplying of activation & crystallization energy without any additional heating and post-annealing and forminga high quality TCO thin film. However, negative oxygen ions which generated from sputteringtarget surface by electron attachment are accelerated to high energy by induced cathode self-bias. Thus the high energy negative oxygen ions can lead to critical physical bombardment damages to forming oxide thin film and this effect does not recover in room temperature process without post thermal annealing. To salve the inherent limitation of plasma sputtering, we have been developed the Magnetic Field Shielded Sputtering (MFSS) process as the high quality oxide thin film deposition process at room temperature. The MFSS process is effectively eliminate or suppress the negative oxygen ions bombardment damage by the plasma limiter which composed permanent magnet array. As a result, electro-optical properties of MFSS processed ITO thin film (resistivity $3.9{\times}10^{-4}{\Omega}{\cdot}cm$, transmittance 95% at 550 nm) have approachedthose of a high temperature DC magnetron sputtering (DMS) ITO thin film were. Also, AOS (a-IGZO) TFTs fabricated by MFSS process without higher temperature post annealing showed very comparable electrical performance with those by DMS process with $400^{\circ}C$ post annealing. They are important to note that the bombardment of a negative oxygen ion which is accelerated by dc self-bias during rf sputtering could degrade the electrical performance of ITO electrodes and a-IGZO TFTs. Finally, we found that reduction of damage from the high energy negative oxygen ions bombardment drives improvement of crystalline structure in the ITO thin film and suppression of the sub-gab states in a-IGZO semiconductor thin film. For realization of organic flexible electronic devices based on plastic substrates, gas barrier coatings are required to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency flexible AMOLEDs needs an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}gm^{-2}day^{-1}$. The key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required (under ${\sim}10^{-6}gm^{-2}day^{-1}$) is the suppression of nano-sized defect sites and gas diffusion pathways among the grain boundaries. For formation of high quality single inorganic gas barrier layer, we developed high density nano-structured Al2O3 single gas barrier layer usinga NBAS process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nano- crystalline phase with various grain sizes in a single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the NBAS processed $Al_2O_3$ gas barrier film have improved order of magnitude compared with that of conventional $Al_2O_3$ layers made by the RF magnetron sputteringprocess under the same sputtering conditions; the WVTR of the NBAS processed $Al_2O_3$ gas barrier film was about $5{\times}10^{-6}g/m^2/day$ by just single layer.

• 한국동물학회지
• /
• 제16권2호
• /
• pp.79-96
• /
• 1973

붕어(Carassius carassius)에 미치는 동의 영향을 밝히기 위하여 다음과 같은 연구를 하였다. 1) 셀루로오스 아세테이트 전기영동법에 의한 젖산수소이탈효소 아이소자임 상, 2) 분광비색법에 의한 LDH활성과 LDH효소계에 대한 동의 영향, 3) 한천 박층 전기영동법에 의한 에스테라아제 아이소자임 상, 4) 전분 겔 전기영동법에 의한 혈색소 상, 및 5) 조직 학적 연구. 1. LDH 아이소자임 영동대는 정상 붕어의 아가미에 2개 (LDH-3 및 LDH-5), 간에 3개(LDH-2, LDH-4, 및 LDH-5), 그리고 근육에서 2개 (LDH-3 및 LDH-4) 나타났다. LDH-1은 이상의 세가지 조직에서 나타나지 않았다. 동을 처리한 붕어의 간에서는 LDH-3이 나타났고 근육에서는 LDH-5가 나타났다. 그러나 아가미에서는 새로운 영동대가 나타나지 않았다. 2. LDH활성은 정상 붕어의 아가미, 간, 및 근육 중 아가미에서 가장 낯았고 근육에서 가장 높았으며, 아가미를 제외한 간과 근육에서는 1일부터 10일간의 동처리에 따라 점차적으로 감소되었다. 3. 동을 처리한 붕어의 간과 근육의 LDH활성 감소는 주로 체내 M-LDH에 대한 동의 억제에 기인된다. 4. 정상 붕어의 아가미, 간, 근육, 혈액, 뇌, 및 신장의 에스테라아제 아이소자임 영동대 수는 각각 3,6,2,2,2 및 2개 였고 이들은 동을 처리한 경우에서도 같았다. 동처리군의 아가미, 간, 혈액 그리고 신장의 에스테라아제 영동대의 상대이동도는 대조군의 그것들과 상이하였다. 5. 정상 붕어의 혈색소 영동대는 양극에 1개 있었다. 동을 처리한 붕어의 혈색소 영동대의 이동도는 정상 붕어의 그 것보다 약간 빠른 것으로 보였다. 6. 동(20ppm)에 5일간 처리한 붕어의 조직학적 연구는 다음과 같았다. 1) 아가미에서는 처음에 표피층이 분리되었다가 분해된 후 완전히 파괴되었다. 2) 간에서는 많은 지방립이 나타났다. 3) 정상 붕어와 동에 처리된 붕어의 근육 사이에서는 조직학적 차이가 없었다. 4) 신장족직은 기부요세관에 손상을 받았다. 요세관세포의 높이가 작아진 후 요세관의 내강이 확대되었다. 많은 기부요세관이 분홍빛의 과립성 형태와 여러 단계의 변성을 나타내었다.