• 동력기계공학회지
• /
• 제17권1호
• /
• pp.104-109
• /
• 2013

Tin and Tinoxide nanoparticles were prepared by arc-discharge nanopowder process. The negative electrode were fabricated using Tin and Tinoxide nanopower. The microstructure and electrochemistry properties were investigated and compared between Tin and Tinoxide. The oxidation film has microstructure of core/shell type and the shell which was attached around Tin nanoparticle consisted of amorphous $SnO_2$. The shape of Tinoxide nanoparticles was formed with irregular shape in comparison with Tin particle. Initial discharge capcity of Tinoxide electrode possesed about 1000mAh/g, which is about 320mAh/g higher than Tin electrode. Irreversible capacity of Tin electrode is much higher than Tinoxide. The cycle performance of Tinoxide electrode was indicated that is batter than Tin. The Tin negative electrode lost most of capacity after 4 cycle but Tinoxide electrode still retained the capacity. The Tinoxide does show some promise as Li-ion battery anode due to their large reversible capacity at low potentials.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.124-128
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature Process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as functional water cleaning are being studied. The electrolyzed water was generated by an electrolysis system which consists of anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH$_4$Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO$_2$ concentration changes dissolved from air. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about 9$\ell$chemicals, while EW did only 400$m\ell$ HCI electrolyte or 600$m\ell$ NH$_4$Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for eliminating environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.339-346
• /
• 2019

In this research, applicability of electrochemical technology in removing nitrogenous compounds from solid waste landfill leachate was examined. Novel cathode material was developed at laboratory by introducing a Cu layer on Al substrate (Cu/Al). Al and mild steel (MS) anodes were investigated for the efficiency in removing nitrogenous compounds from actual leachate samples collected from two open dump sites. Al anode showed better performances due to the effect of better electrocoagulation at Al surface compared to that at MS anode surface. Efficiency studies were carried out at a current density of $20mA/cm^2$ and at reaction duration of 6 h. Efficiency of removing nitrate-N using Al anode and developed Cu/Al cathode was around 90%. However, for raw leachate, total nitrogen (TN) removal efficiency was only around 30%. This is due to low ammonium-N removal as a result of low oxidation ability of Al. In addition to the removal of nitrogenous compounds, reactor showed about 30% removal of total organic carbon. Subsequently, raw leachate was diluted four times, to simulate pre-treated leachate. The diluted leachate was treated and around 88% removal of TN was achieved. Therefore, it can be said that the reactor would be good as a secondary or tertiary treatment step in a leachate treatment plant.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.445-453
• /
• 2022

SiO_x was prepared from a mixture of Si and SiO₂ via high-energy ball milling as a negative electrode material for Li-ion batteries. The molar ratio of Si to SiO₂ as precursors and the milling time were varied to identify the synthetic condition that could exhibit desirable anode performances. With an appropriate milling time, the material showed a unique microstructure in which amorphous Si nanoparticles were intimately embedded within the SiO₂ matrix. The interface between the Si and SiO₂ was composed of silicon suboxides with Si oxidation states from 0 to +4 as proven by X-ray photoelectron spectroscopy and electrochemical analysis. With the addition of a conductive carbon (Super P carbon black) as a coating material, the SiO_x/C manifested superior specific capacity to a commercial SiO_x/C composite without compromising its cycle-life performance. The simple mechanochemical method described in this study will shed light on cost-effective synthesis of high-capacity silicon oxides as promising anode materials.

• 분석과학
• /
• 제18권5호
• /
• pp.369-375
• /
• 2005

몇 가지 희토류 원소 이온들과 이들의 카테콜 착물 들의 시차펄스 양극벗김 voltammogram들을 0.1 M LiCl 와 pH 5.3 용액에서 연구하였다. 회토류 원소 이온의 산화 봉우리는 원소에 따라 하나 또는 두 개의 봉우리가 나타났고, 산화봉우리 전류는 농도의 증가에 따라 직선적으로 증가하였다. $Eu^{3+}$와 $Pr^{3+}$은 각각 -0.2 V에서 산화 봉우리가 나타났고, $Tm^{3+}$, $Tb^{3+}$, $Yb^{3+}$ 및 $Sm^{3+}$은 -0.5 V와 -0.2 V에서 각각 두개의 산화 봉우리가 생성되었다. 이 산화 전류를 이용한 검정곡선의 직선범위는 대략 1.0 ppm~10 ppm정도였다. 희토류 이온-카테콜 착물의 시차 펄스 양극 벗김 oltammogram에서는 $Tb^{3+}$-catechol 과 $Eu^{3+}$-catechol 착물 에서는 -0.95 V와 -0.65 V에서 각각 하나의 산화봉우리가 나타났고, $Sm^{3+}$-catechol, $Pr^{3+}$-catechol, $Tm^{3+}$-catechol 및 $Yb^{3+}$-catechol의 착물에서는 두 개의 산화 봉우리가 나타났다. 이를 이용한 검정곡선의 농도범위는 대략 0.1 ppm-1.0 ppm 정도였다. 따라서 희토류 원소의 voltammogram의 산화전류 보다 희토류 이온-카테콜 착물의 산화 전류의 감도가 10배 정도 증가함을 알았다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.685-688
• /
• 2002

In this paper, it is reported that the anode current changes at the constantly applied gate voltages and the current-voltage (I-V) characteristics of Si, Co silicide and Mo silicide field emitter arrays (FEAs) depending on vacuum level from a $10^{-9}$ torr to a $10^{-6}$ torr. The mechanism of the robustness of anode current degradation of Mo silicide FEAs under poor vacuum conditions can be explained by the model of tolerance for the oxygen adsorption and oxidation at the silicide surface. Also, we present the changes of emitting area and work function of the emitters according to vacuum level.

• 한국전자통신학회논문지
• /
• 제6권3호
• /
• pp.355-362
• /
• 2011

본 논문에서는 특정 용액 내에서 전기분해 원리를 이용하여 금속 표면을 산화시켜 절연피막을 형성하는 장치를 개발한다. 기존에는 주로 양극에만 펄스 형태로 전압을 인가하는 단극성(unipolar) 방식이지만 본 논문에서는 H-브리지를 이용하여 양극에 양(+)전압과 음(-)전압을 번갈아 가면서 공급을 하는 양극성(bipolar) 장치를 제작하여 실험하였다. 공급전류 가변은 PWM 변조를 이용하였으며, (+)와 (-)의 극성변화는 H-브리지를 이용하여 양극성 펄스전압을 공급할 수 있도록 하였다. 그 결과로써 단극성보다 균일한 기공을 갖는 피막이 형성되었다.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.223-230
• /
• 2011

An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

• 한국가스학회지
• /
• 제4권1호
• /
• pp.40-48
• /
• 2000

연료전지는 일정하게 유지되는 전극-전해질계의 공정에 의해 연료와 산화제의 화학에너지를 전기에너지로 끊임없이 전환시킬 수 있는 전기화학장치이다. 인산형 연료전지는 전해질로 진한 인산염을 사용한다. 연료전지 시스템에서 가장 중요한 부분인 스택은 연료의 산화가 일어나는 anode, 산화물의 환원이 일어나는 cathode, 그리고 anode와 cathode를 분리시키고 이온을 전도시키는 전해질로 이루어져 있다. 연료전지의 성능은 시스템의 환경에 따른 작동 및 디자인 변수들에 의해 좌우된다. 따라서 연료전지의 핵심부분이라 할 수 있는 스택의 성능향상을 위하여 전산유체역학 코드를 이용한 스택에 대한 3차원적 모델링 및 전기화학반응이 포함된 모사를 수행하였다. 이로부터 산화제의 유량변화에 따른 스택 내부에서의 연료, 산화제 및 생성물의 농도, 그리고 반응에 의해 생성된 열의 전달에 의한 스택의 온도 분포 및 변화를 전산유체 코드인 FLUENT를 이용하여 계산하였다.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.251-257
• /
• 2001

반도체 소자의 고집적화에 따른 세정공정 수는 점점 증가하고 있는 추세에 있다 현재 사용되는 세정은 다량의 화학약품 및 초순수를 소비하며, 고온에서 행하여지고 있는 RCA세정을 근간으로 하고 있다. 세정공정수의 증가는 바로 화학약품의 사용량 증가를 초래하게 되며, 이에 따른 환경문제가 심각하게 대두되고 있는 실정에 이르렀다. 따라서 이러한 화학약품 및 초순수 사용을 절감하고, 저온에서 세정공정이 이뤄지는 기술이 향후 요구되어 지고 있다. 이번 연구는 이러한 관점에서 화학약품 및 초순수 사용량을 줄이며, 상온 공정이 이뤄지는 전리수를 이용하여 실리콘 웨이퍼 세정을 하였다. 제조된 전리수는 산화성 성질을 지닌 양극수와 환원성 성질인 음극수로 이루어지고, 각각 pH 및 ORP는 4.7/+1050mV, 9.8/-750mV를 30분 이상 유지하고 있었다 전리수의 양극수에 의한 금속제거 효과가 음극수의 효과보다 우수함을 확인할 수 있었으며, 다양한 입자제거 실험에도 불구하고, 동일한 분포도를 나타내고 있었다.