• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.351-356
• /
• 2009

A dual-mode annular ring antenna for both global positioning system(GPS) and satellite digital multimedia broad-casting(DMB) is designed. The proposed antenna consists of a coupling feed line and four slots on the annular ring patch. The gap between the feed line and the annular ring patch is used for an input impedance matching, and the slot length is used for adjusting the resonant frequency of the $TM_{21}$ mode at the DMB frequency. The antenna was fabricated and measured. The experimental results show that the antenna resonants at the GPS and DMB frequencies with suitable bandwidths, and had a broadside radiation pattern at the GPS band and a conical beam radiation pattern at the DMB band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.773-781
• /
• 2000

We proposed an eccentric annular ring microstrip slot antenna for improving a narrow bandwidth of the conventional annular ring microstip slot antenna. The proposed antenna has an asymmetric slot and a normal microstrip feedline. This antenna is analyzed and optimized by using the finite difference time domain (FDTD) method. The impedance bandwidth of the optimized antenna is more than 1 octave that is much broader than the conventional annular ring microstrip slot antenna for the same size.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.28-41
• /
• 2003

A micros-strip ring patch antenna with ultra wide band characteristics is presented. The proposed antenna is designed by a modified form of the annular ring patch antenna with modified microstrip feedline. The designed antenna gives 5.6GHz bandwidth with regular radiation pattern from 4.4GHz to 12.0GHz for -10dE return loss or VSWR of less than 2.0 in simulation, which is also excellently agreed with the measured data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.688-696
• /
• 2005

An antenna was designed and manufactured for the DBS receiver system. This antenna is a planar or flat antenna which shows many advantages over the conventional parabolic antenna such as higher aperture efficiency, easier installation and improved aesthetics to name a few. The antenna is a novel design employing microstrip annular ring resonating antenna elements and a radial waveguide feeder network. The LNB(Low Noise Blockdown Converter) is can integrate with the antenna iしt the back of the radial waveguide. The 35cm diameter antenna works at 31.8dBi minimum gain which implies an aperture efficiency of around $80\%$.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.183-185
• /
• 2010

A 2.4 GHz dual-polarized antenna for a Doppler radar is studied. The proposed dual-polarized antenna using a stacked annular ring patch with two co-centric gap-coupled feed lines and a $90^{\circ}$ hybrid exhibits fairly good performance of 22 dB isolation at a center frequency of 2.4 GHz. Using a $90^{\circ}$ hybrid, a right-handed circular polarization for the transmitter and a left-handed circular polarization for the receiver are implemented. The gain of the designed antenna is about 0 dBi over operating frequencies. The antenna size including a ground plane is only $40{\times}40\;mm^2$.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.1
• /
• pp.13-21
• /
• 2003

This paper presents the analysis of the mode characteristics of an annular ring microstrip patch antenna for circular polarization with attachment mode using method of moments in the spectral domain. For a probe excitation, the input impedance are obtained by using the single mode approximation for both the $TM_{11}$ and $TM_{12}$ modes and compared with those by Vector Hankel Transform. While the $TM_{11}$ mode has a high Q, it is a poor radiating mode; the $TM_{12}$ mode is more suitable for antenna applications. It is also shown that the bandwidth of the $TM_{12}$ mode is wider than that of the $TM_{11}$ mode in terms of axial ratio for circular polarizatio

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.370-377
• /
• 2001

This paper proposed an eccentric annular ring microstrip antenna which has an asymmetric slot and a tuning stub for improving bandwidth and size of the circular microstrip patch antenna. The field characteristics of the eccentric annular ring microstrip antenna have been calculated by using the method of FDTD (finite difference time domain). The calculated results showed good agreement with the measured results. As a result of measurement, the antenna size and the bandwidth has been improved to that of 12.2 % and 4.8 % respectively, comparing to circular microstrip patch antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1940-1945
• /
• 2006

The small and wideband annular ring slot antenna with eccentric radiating structure and low impedance feedline is presented. This antenna is analyzed by using substrate with permittivity 4.3 and thickness 1mm. As the measured impedance bandwidth of proposed antenna is $118%(S_{11}{\leq}-10dB)$, its bandwidth is much broader than that of conventional annular ring slot antenna.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.375-380
• /
• 2002

Tong-young LNG tank is a LNG storage tank of 140,000 kl, and it is composed of Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof. Generally, when concrete temperature arise, the complex thermal stress of inner and outer part can cause serious thermal crack and damage at structure. So in this paper, for the control of this thermal crack, we did the concrete mix design with the base of fly-ash 30% substitute at binder, and through the computer modelling at Bottom Slab(Annular, Center), Outer Wall, Ring Beam and Roof, we studied the probability of thermal crack by thermal crack index.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.607-612
• /
• 2001

Rotary ultrasonic motors are based on the traveling wave generated by piezo materials attached on the stator. Large scale model of an annular ring was built to understand the fundamental mechanism involved in the rotary ultrasonic motors. Traveling wave on the structure can be generated by superposing two standing waves. Precise matching of the amplitudes and phase shift between two standing waves in time and space is the key to the success of generating a traveling wave.