• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.365-371
• /
• 2013

Pine mushroom (Tricholoma matsutake) is one of the most profitable forest products in Korea. We postulated a hypothesis that a high rate of returns to labor input could make the harvest of pine mushroom off the optimum level. In the view of developing a sustainable production strategy for pine mushroom producers, production of pine mushroom collectors and pine mushroom growth function were estimated using maximum entropy method. Annual pine mushroom production and labor input were the data used in the estimation of production function of pine mushroom collectors and pine mushroom growth function. The level of sustainable maximum production derived from the estimated function. The production function estimated shows that production of pine mushroom is affected more by the resource of pine mushroom stocked in the forests than by labor that households put in forestry business. The production function of mushroom collectors and the estimated growth function indicate that pine mushroom harvests for the period of 2005-2011 did not reach the potential level of maximum sustainable production. Therefore, we suggest that pine mushroom harvest should be controlled until the resource stock of pine mushroom in the forests increases to the level of maximum sustainable production.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.428-433
• /
• 2009

Dissolved oxygen is considered as one of the important water-quality constituents in streams from one century ago and fishes perish in low dissolved oxygen concentration. Environmental scientists and engineers have introduced the deterministic model to estimate dissolved oxygen concentration of streams and recommended the use of the Delta Method (DM), Approximate Delta Method (ADM), Extreme Value Method (EVM) and Optimization Method (OPT) which can be applied in no spatial variation of dissolved oxygen. The diurnal or annual variation of dissolved oxygen is mainly determined from the parameters such as reaeration rate, 1st production rate and respiration rate which are related to dissolved oxygen. Each method was briefly introduced and applied to two sampling sites of Anseong Stream watershed in this paper. The limitation, advantages and disadvantages of each method were reviewed and analyzed after running the each method. From these analyses, the benefit-cost approach to estimate dissolved oxygen effectively in streams was recommended.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.69-75
• /
• 1994

This experiment was canied out to study the effect of cutting frequencies (3, 4 and 5 cuts per year) and mineral nitrogen fertilization on dry matter yields, in order to estimate optimum level of fertilizing mineral nitrogen in orchardgrass(Dacry1is glomerafa L.). The results are as follows: 1. Dry matter yields were the highest in the 1st cut at 3 cutting frequency and in the 2nd cut at 4 and 5 cutting frequencies, and they shared 49.7, 37.0 and 37.0% of annual dry matter yield respectively. 2. When only phosphorus and potassium were applied, annual dry matter yields were between 9.4 and 11.5 tons per ha and the highest yield was observed at 3 cutting frequency. 3. Dry matter yield in relation to fertilization of mineral nitrogen was highly increased when more nitrogen was applied as 360 kg per ha compared to 240 kg per ha at 3 cutting frequency. At 4 and 5 cutting frequencies, increases in dry matter yield, to large extent, were showed at 120 and 150 kg of nitrogen per ha(30 kg Nlcutlha) compared to no application of nitrogen. The efficiencies of mineral nitrogen fertilization (kg DM/kg N) were 28.0, 22.7 and 20.6 kg dry matter yields per nitrogen(kg) respectively). 4. At 4 and 5 cutting frequencies, dry matter yields were reduced when 360 kg and 300 kg of mineral nitrogen per ha(90 kg and 60 kg Nlcutlha) were applied respectively. 5. Particularly at 4 and 5 cutting frequencies of this study, maximum marginal yields reached at 129.9 kg and 148.0 kg of fertilizing mineral nitrogen per ha, and economical borden of mineral nitrogen fertilization were between 222.4 and 250.0 kg and between 244.8 and 276.8 kg respectively. At the same cutting frequencies, the highest dry matter yields were obtained at 365.4 and 433.8 kg of fertilizing mineral nitrogen respectively.

• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1451-1459
• /
• 2021

Objective: The objectives of the study were to evaluate reproductive performance and selection response through genetic trend of community-based breeding programs (CBBPs) of Bonga sheep. Methods: Reproduction traits data were collected between 2012 and 2018 from Bonga sheep CBBPs. Phenotypic performance was analyzed using the general linear model procedures of Statistical Analysis System. Genetic parameters were estimated by univariate animal model for age at first lambing (AFL) and repeatability models for lambing interval (LI), litter size (LS), and annual reproductive rate (ARR) traits using restricted maximum likelihood method of WOMBAT. For correlations bivariate animal model was used. Best model was chosen based on likelihood ratio test. The genetic trends were estimated by the weighted regression of the average breeding value of the animals on the year of birth/lambing. Results: The overall least squares mean±standard error of AFL, LI, LS, and ARR were 375±12.5, 284±9.9, 1.45±0.010, and 2.31±0.050, respectively. Direct heritability estimates for AFL, LI, LS, and ARR were 0.07±0.190, 0.06±0.120, 0.18±0.070, and 0.25±0.203, respectively. The low heritability for both AFL and LI showed that these traits respond little to selection programs but rather highly depend on animal management options. The annual genetic gains were -0.0281 days, -0.016 days, -0.0002 lambs and 0.0003 lambs for AFL, LI, LS, and ARR, respectively. Conclusion: Implications of the result to future improvement programs were improving management of animals, conservation of prolific flocks and out scaling the CBBP to get better results.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.71-81
• /
• 2019

This research was conducted to improve availability of agricultural by-products, national natural resources that could be used as fertilizer source, by estimating the amount of production and collecting main contents of fertilizer substances from previous studies and data, in order to be used as basic data to investigate national resources that could be used as alternatives for imported oil-cakes in the future. Conversion factor was used to estimate annual production of agricultural by-products for main 34 crop types in 2018. For total agricultural by-products, rice straws accounted at 50.3% for the highest proportion, followed by 8.7% of rice husks, showing that by-products from rice harvest accounted at 59.0% for all by-products. Further, there were listed the contents of fertilizer substances (nitrogen, phosphoric acid, potash) in 40 types of by-products from agricultural areas. The average contents of nitrogen, phosphoric acid, and potash in agricultural by-products were 1.43%, 0.59%, and 1.90%, respectively. As a result of estimating the annual nitrogen supply amount from 26 agricultural by-products in 2018, it was found that it could supply 44,911 tons of nitrogen. The investigated by-products contained fertilizer substances such as nitrogen, phosphoric acid, and potash, but the contents were lower compared to castor oil-cake used as main component of organic fertilizer. Therefore, resource management plan needs to be established for efficient use of by-products because time, location, and nutrient content of agricultural by-product production were extremely different. Research on fertilizer and manure using agricultural by-products need to be conducted to develop and distribute alternatives for imported oil-cakes.

• Korean Journal of Ecology and Environment
• /
• v.34 no.3 s.95
• /
• pp.166-174
• /
• 2001

The autochthonous and allochthonous organic carbon loading were measured in Lake Soyang, to estimate the amount of carbon loading into the lake and the contribution of their sources to tile lake's carbon loading. Autochthonous carbon loading was estimated from phytoplankton primary production with the extracellular organic carbon (EOC). Allochthonous loading was determined by measuring dissolved organic carbon (DOC) and particulate organic carbon (POC) concentration in the main inflowing Soyang River. Both autochthonous and allochthonous organic carbon loading were high during the svmmer, from July to September, and accounted for 43.2% and 71.7% of the annual loading, respectively. Primary productivity was elevated up to $1,000\;mgC\;m^{-2}\;d^{-1}$ during summer and lowest in winter. EOC production from phytoplankton was also large in summer, resulting in a high DOC concentration in the lake water. Primary production of phytoplankton and allochthonous organic matter loading from the watershed contributed to 53.6% and 46.4% of total loading, respectively. The EOC production accounted far $4.4{\sim}21.2%$ of POC primary production, implying that EOC production of phytolankton must be considered in estimation of primary production.

• The Journal of Fisheries Business Administration
• /
• v.45 no.1
• /
• pp.63-77
• /
• 2014

This study is to estimate the recent changes in total factor productivity of 15 Korean adjacent water fisheries based on Malmquist productivity indices. The study adopted both input and output oriented productivity measures utilizing a hyperbola distance function. In addition to this point, the study also calculated the 95% confidence interval for the various components of the productivities in order to access the statistical significance of estimates using 2000 times of re-sampling process through the smoothed bootstraping. The results of the study showed us that there was 18% reduction in the overall total factor productivity during the study period from 2007 to 2011, which turned out to be 5% of annual decrease in productivity. The study found that the main reason of this decrease in total productivity is about 22% downward shift of a fisheries production function due to recent conditions of a devastated fishing ground. When we evaluated the statistical significance of changes in technical efficiency combining both pure technical and scale efficiency based on the 95% confidence intervals, we could not find any evidence of changes in those components of total factor productivity. When we accessed the productivity of the each of 15 adjacent water fisheries methods, only the large danish seine fisheries showed us about 7% increase in productivity. Even though the large trawling and the large tow-boat trawling revealed no changes in productivity, all of the other 12 fisheries suffered the decreases in productivities.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.443-453
• /
• 2005

For the purpose of the comparative environmental estimation of the incineration processes for domestic wastes, environmental impacts for several incineration processes for one ton of domestic wastes have been estimated by employing life cycle assessment as the environmental impact assessment method. The scheme of minimum production of environmental pollutants has been considered for three different incineration processes. The evaluation for latent influence on environment was carried out by using CML(Center of Environmental Science) method which was developed by University of Leyden in Netherlands based on the equivalency factor suggested by Korea Accreditation Board. The result of life cycle assessment has showed that the total cost analysis according to the amount of incinerating waste was dependent on the operating conditions of incineration process. In addition, the annual running cost for the incineration of one ton of wastes was estimated to be negatively dependent on the amount of wastes. The degree of environmental pollution was mainly due to the kinds of the wastes rather than by the amount of wastes.

• Journal of Forest and Environmental Science
• /
• v.34 no.1
• /
• pp.12-23
• /
• 2018

Quantitative information on biomass and available nutrients are essential for developing sustainable forest management strategies to regulate atmospheric carbon. An attempt was made at Chilapatta Reserve Forest in Duars region of West Bengal to quantify its above and below ground carbon along with available "N", "P" and "K" in the soil. Stratified random nested quadrats were marked for soil, biomass and litter sampling. Indirect or non-destructive procedures were employed for biomass estimation. The amount of these available nutrients and organic carbon quantified in soil indicates that the forest soil is high in organic carbon and available "K" and medium in phosphorus and nitrogen. The biomass, soil carbon and total carbon (soil C＋C in plant biomass) in the forest was 1,995.98, 75.83 and $973.65Mg\;ha^{-1}$. More than 90% of the carbon accumulated in the forest was contributed by the trees. The annual litter production of the forest was $5.37Mg\;ha^{-1}$. Carbon accumulation is intricately linked with site quality factors. The estimated biomass of $1,995.98Mg{\cdot}ha^{-1}$ clearly indicates this. The site quality factor i.e. tropical moist deciduous with optimum availability of soil nutrients, heavy precipitation, high mean monthly relative humidity and optimum temperature range supported luxuriant growth which was realized as higher biomass accumulation and hence higher carbon accumulated.

• KDI Journal of Economic Policy
• /
• v.26 no.2
• /
• pp.143-178
• /
• 2004

For a thorough accounting for economic growth, it is desired to include the working hours and the efficiency of labor as production factors in addition to the number of workers and human and physical capital stocks. This paper estimates the distribution of weekly working hours of total workers as a continuous variable using the maximum likelihood method, estimates the efficiency of labor as a function of working hours using wage statistics, and by combining these results, estimates the labor efficiency index in Korea for the period 1963~2003. Estimation results show that the efficiency of labor was maximized when the weekly working hours was 40 hours, and the average annual growth rate of the labor efficiency for the period 1963~2003 was 0.14 percent.