• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.519-528
• /
• 2006

In the construction of hydraulic structures deciding a design flood is one of the most important works. It should be especially noted that the time distribution of the design rainfall method makes a significant effect on the results of the design flood. Thus, choosing an appropriate time distribution method for the design rainfall is a very important process. In recent years, Huff's method is usually used in Korea. This method presents dimensionless rainfall-time cumulative curves, which are made through the analyses of storm data. In this study, the annual maximum rainfall data, from 1961 to 2004 were analyzed to make the dimensionless rainfall-time cumulative curves and hyetographs in Seoul. The results were compared with the "Regional Time Distribution of the Design Rainfall", (KICT, 1989 and MCT, 2000). As a result, the dimensionless rainfall-time cumulative curves are smoother than Huff's results when the duration of an annual maximum rainfall is short. In addition, the curves are similar with the Huff's results as the duration is longer.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.217-223
• /
• 2001

Where no records are available at a site, a preliminary estimate may be made from relations between floods and catchment chatacteristics. A number of these chatacteristics were chosen for testing and were measured for those catchments where mean annual flood estimates were available. Although the improvement using extended data in regression of flood estimates on catchment characteristics was small, this may be due to the limitations of the regression model. When an individual short term record is to be extended, more detailed attention can be given; an example is presented of the technique which should be adopted in practice, particularly when a short term record covers a period which is known to be biassed. A method of extending the peaks over a threshold series is presented with a numerical example. The extension of records directly from rainfall by means of a conceptual model is discussed, although the application of such methods is likely to be limited by lack of recording raingauge information. Methods of combining information from various sources are discussed in terms of information from catchment characteristics supplemented by records. but are generally applicable to different sources of information. The application of this technique to estimating the probable maximum flood requires more conservative assumptions about the antecedent condition, storm profile and unit hydrograph. It is suggested that the profile and catchment wetness index at the start of the design duration should be based on the assumption that the estimated maximum rainfall occurs in all durations centered on the storm peak.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.29-39
• /
• 2018

In this study, the applicabilities of flood risk indices using FVI from IPCC, PSR method from OECD, and DPSIR method from EEA, were analyzed. Normalized values of daily maximum rainfall, hourly maximum rainfall, ten minute maximum rainfall, annual precipitation, total days of heavy rainfall (more than 80mm/day), density of population, density of asset, DEM, road statistics, river maintenance ratio, reservoir capacity, supply ratio of water supply and sewerage, and pumping capacity were constructed from 2000 to 2015 for nationwide 113 watersheds, to estimate flood risk indices. The estimated indices were compared to 4 different types of flood damage such as the number of casualties, damage area, the amount of flood damage, and flood frequency. The relationships between flood indices and different flood damage types demonstrated that the flood index using the PSR method shows better results for the amount of flood damage, the number of casualties and damage area, and the flood index using the DPSIR method shows better results for flood frequency.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.3
• /
• pp.69-78
• /
• 1986

This studies were established to find out the characteristics of frequency distributiom for the number of occurrence and magnitude, probable flood flows according to the return periods, design floods, and design frequency factors for the studying basins in relation to the risk levels which can be correlated with design return period and the life of structure in the non-annual exceedance series. Eight watersheds along Han, Geum, Nak Dong and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Poisson distribution and Exponential distribution were tested as a good fitted distributions for the number of occurrence and magnitude for exceedance event, respectively,at selected watersheds along Han, Geum, Nak Dong and Seom Jin river basin. 2.Formulas for the probable flood flows and probable flood flows according to the return periods were derivated for the exponential distribution at the selected watersheds along Han, Geum, Nak Dong, and Seom Jin river basin. 3.Analysis for the risk of failure was connected return period with design life of structure in the non-annual exceedance series. 4.Empirical formulas for the design frequency factors were derivated from under the condition of the return periods identify with the life of structure in relation to the different risk levels in the non-annual exceedance series. 5.Design freguency factors were appeared to be increased in proportion to the return periods while those are in inverse proportion to the levels of the risk of failure. Numerical values for the design frequency factors for the non-annual exceedance series ware appeared generally higher than those of annual maximum series already published by the first report. 6. Design floods according to the different risk levels could be derivated by using of formulas of the design frequency factors for all studying watersheds in the nor-annual exceedance series.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.49-60
• /
• 2002

This study was conducted to estimate the design flood by the determination of best fitting order of LH-moments of the annual maximum series at six and nine watersheds in Korea and Australia, respectively. Adequacy for flood flow data was confirmed by the tests of independence, homogeneity, and outliers. Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Pareto (GPA), and Generalized Logistic (GLO) distributions were applied to get the best fitting frequency distribution for flood flow data. Theoretical bases of L, L1, L2, L3 and L4-moments were derived to estimate the parameters of 4 distributions. L, L1, L2, L3 and L4-moment ratio diagrams (LH-moments ratio diagram) were developed in this study. GEV distribution for the flood flow data of the applied watersheds was confirmed as the best one among others by the LH-moments ratio diagram and Kolmogorov-Smirnov test. Best fitting order of LH-moments will be derived by the confidence analysis of estimated design flood in the second report of this study.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.291-294
• /
• 2003

The Water resources utilization pattern of Jangsung reservoir was studied. The observed precipitation and existing reservoir operation data such as irrigation amount, reservoir storage, river maintenance requirement, flood control discharge were collected for ten years period and analyzed. Major findings of this study are as follows: The observed average, minimum, maximum annual precipitation were 905.1mm, 1,977.3mm, 1,554.3mm during study period, respectively. The average annual irrigation amount was 554.5mm, irrigation amount of drought years of '92 and '94 was 604.6mm, 679.2mm, respectively. However, irrigation amount of extended drought year '95 was 384.9mm. It showed that supplying capacity of Jangsung reservoir was limited when consecutive 2 year drought occurred. The main water resources usage of Jangsung reservoir was irrigation, but flood control discharge exceed irrigation amount exceptionally when high precipitation occurred. The reservoir operation record revealed that discharge for river maintenance was delivered even drought years.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.367-370
• /
• 2007

In recent, the utilization of underground in urban area is increased as subway, store, and others but we have done a few studies for the inundation of underground due to flooding. So, we investigate the examples of underground inundation and the causes of inundation for flood events. And the relationship between flood characteristics and underground inundation is analyzed through the frequency of rainfall which is made by annual multi maximum series. As a result, most of underground is inundated by high frequency of rainfall. And there are some cases that the underground is inundated by low frequency of rainfall because of poor drainage system and characteristics of location.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.229-232
• /
• 2002

This study was conducted to estimate the design flood by the determination of best fitting order of LH-moments of the annual maximum series at six and nine watersheds in Korea and Australia, respectively. Adequacy for flood flow data was confirmed by the tests of independence, homogeneity, and outliers. Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Pareto (GPA), and Generalized Logistic (GLO) distributions were applied to get the best fitting frequency distribution for flood flow data. Theoretical bases of L, L1, L2, L3 and L4-moments were derived to estimate the parameters of 4 distributions. L, L1, L2, L3 and L4-moment ratio diagrams (LH-moments ratio diagram) were developed in this study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.20-32
• /
• 1990

Abstract This study was conducted to pursue the normalization of frequency distribution by making an approach to the coefficient of skewness to nearly zero through the Box-Cox transformation, to get probable flood flows can be calculated by means of the transformation equation which has been derivated by Box-Cox transformation in the annual maximum series of the applied watersheds. It has been concluded that Box-Cox transfromation is proved to be more efficient than logarithmic, square root and SMEMAX transformation which is based on the trigonometric solution of a right triangle whose three verteces repesent the smallest, median and largest observed values of a population in making the coefficient of skewness nearer to zero. Consequently it is shown that probable flood flows according to the return period based on Box-Cox transformation are closer to the observed data as compared to other methods including SMEMAX transformation and fitted probability distributions such as the three parameter lognormal and the type I extremal distribution for the applied watersheds.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.16-16
• /
• 2011

Statistics of extreme rainfall play a vital role in engineering practice from the perspective of mitigation and protection of infrastructure and human life from flooding. While flood frequency assessments, based on river flood flow data are preferred, the analysis of rainfall data is often more convenient due to the finer spatial nature of rainfall recording networks, often with longer records, and potentially more easily transferable from site to site. The rainfall frequency analysis as a design tool has developed over the years in New Zealand from Seelye's daily rainfall frequency maps in 1947 to Thompson's web based tool in 2010. This paper will present a history of the development of New Zealand rainfall frequency analysis methods, and the details of the latest method, so that comparisons may in future be made with the development of Korean methods. One of the main findings in the development of methods was new knowledge on the distribution of New Zealand rainfall extremes. The High Intensity Rainfall Design System (HIRDS.V3) method (Thompson, 2011) is based upon a regional rainfall frequency analysis with the following assumptions: $\bullet$ An "index flood" rainfall regional frequency method, using the median annual maximum rainfall as the indexing variable. $\bullet$ A regional dimensionless growth curve based on the Generalised Extreme Value (GEV), and using goodness of fit test for the GEV, Gumbel (EV1), and Generalised Logistic (GLO) distributions. $\bullet$ Mapping of median annual maximum rainfall and parameters of the regional growth curves, using thin-plate smoothing splines, a $2km\times2km$ grid, L moments statistics, 10 durations from 10 minutes to 72 hours, and a maximum Average Recurrence Interval of 100 years.