• 전자공학회논문지D
• /
• 제36D권6호
• /
• pp.44-51
• /
• 1999

High density DRAM의 cell capacitor로 촉망 받고 있는 고유전체 BST박막 커패시터의 저 전계(<0.2MV/cm) 영역에서의 전기전도 현상을 분석하였다. 저 전계 영역에서 Pt/BST/Pt구조의 MIM 커패시터에 일정 전계를 인가한 후 전류를 측정하는 I(t)방법을 이용하여 유전완화전류와 누설전류를 분리해내어 박막의 측정온도 변화, 전계의 크기, 인가방향 변화, 후속 열처리에 따른 BST 박막의 전기전도 기구를 분석하였다. 그 결과, 유전완화전류는 Hoppiong process에 의한 BST박막내부의 trap된 전자들의 이동에 의한 전하재배치로 설명되어지며, 누설전류도 박막내의 trap에 의한 poole-Frenkel process에 의한 것임을 알 수 있었다. 그리고 각 전류성분에 기억하고 있는 trap이 BST박막내의 산호 결핍임을 추정하였다.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.41-47
• /
• 2010

The effects of thermal treatment on CNTs, which were coated with a-$CN_x$ thin film, were investigated and related to variations of chemical bonding and morphologies of CNTs and also properties of field emission induced by thermal treatment. CNTs were directly grown on nano-sized conical-type tungsten tips via the inductively coupled plasma-chemical vapor deposition (ICP-CVD) system, and a-$CN_x$ films were coated on the CNTs using an RF magnetron sputtering system. Thermal treatment on a-$CN_x$ coated CNT-emitters was performed using a rapid thermal annealing (RTA) system by varying temperature ($300-700^{\circ}C$). Morphologies and microstructures of a-$CN_x$/CNTs hetero-structured emitters were analyzed by FESEM and HRTEM. Chemical composition and atomic bonding structures were analyzed by EDX, Raman spectroscopy, and XPS. The field emission properties of the a-$CN_x$/CNTs hetero-structured emitters were measured using a high vacuum (below $10^{-7}$ Torr) field-emission measurement system. For characterization of emission stability, the fluctuation and degradation of the emission current were monitored in terms of operation time. The results were compared with a-$CN_x$ coated CNT-emitters that were not thermally heated as well as with the conventional non-coated CNT-emitters.

• 센서학회지
• /
• 제1권1호
• /
• pp.53-57
• /
• 1992

본 연구는 $CdS_{1-x}Se_{x}$의 박막을 제작하고 그 전기-광학적인 특성을 조사한 것이다. 전자선 가열증착법을 이용하여 $CdS_{1-x}Se_{x}$을 알루미나 기판위에 $1.5{\times}10^{-7}$ torr의 압력, 4kV의 전압, 2.5 mA의 전류 그리고 기판온도를 $300^{\circ}C$로 유지하여 증착하였다. 증착된 $CdS_{1-x}Se_{x}$ 박막은 X-ray 회절 실험을 통하여 볼 때, 육방정계의 결정구조를 가지며 성장되었다. $CdS_{1-x}Se_{x}$ 도전막은 특정분위기에서 $550^{\circ}C$, 30분간 열처리함으로써 높은 광전도성을 나타내게 되었다. 또한 Hall 효과, 광전류 스펙트럼, 감도, 최대 허용 전력과 응답시간 등을 조사하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.182-182
• /
• 1999

The chemisorption effect of CO on the Ni/Cu(001) surface was investigated using LEED(Low Energy Electron Diffraction) and EELS(Electron Energy Loss Spectrscopy0 under the UHV conditions. after mounting the Cu(001) single crystal in the UHV chamber (base pressure 1$\times$10-10Torr), a clean surface was obtained after a few cycles of repeated Ar+ ion sputtering and annealing at about 40$0^{\circ}C$. The epitaxial thin Ni films were formed on the Cu(001) by evaporation from 99.999% Ni block. The pseudomorphic growth and the orderness of the thin Ni films were monitored by c(2$^{\circ}C$2) LEED pattern. CO adlayers on Ni epitaxial thin films were prepared by dosing pure CO has through a leak valve. After CO adsorpton at room temperature, two pairs of peaks were observed by EELS, whose relative intensities are changed as the film thickness is varied and time is elapsed. These two pair of peaks are likely related to different bonding sites (-top and bridge sites) of C-Ni as well as C-O vibration. Experimental results and qualitative interpretation of the spectra wille be discussed. The possibility of using EELS in combination with probe species (CO) to investigate the nature of thin film growth is mentioned. We will report the experimental result of O2 dosage on Ni film and interaction of CO and O2.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.36-43
• /
• 2000

청색 발광 SrS:CuCl TFEL 소자의 휘도를 향상시키기 위하여 황 압력과 열처리 조건을 최적화하여 SrS:CuCl TFEL 소자를 제작하였다. 전자빔 증착 장비를 이용하여 SrS:CuCl 형광체를 6000 ~ 8000 ${\AA}$ 두께로 증착 시킨 후, 800 $^{\circ}C$에서 3분 동안 열처리하여 TFEL 소자를 제작시켰다. 형광체 결정은 열처리 온도 및 열처리 지속 시간의 증가에 따라 향상되었다. SrS:CuCl TFEL 소자는 468 nm 와 500 nm에서 발광 피크 파장을 나타내었고, CIE 색 좌표는 x = 0.21, y = 0.33로 청색 빛이 방출되었다. SrS:CuCl TFEL 소자의 휘도$(L_{40})$는 형광체 증착 중의 황 압력에 크게 의존하여 황 압력을 $8{\times}10^{-6}$ torr에서 $2{\tiems}10^{-5}$ torr로 증가시켰을 때 262 cd/$m^2$에서 728 cd/$m^2$로 증가되었다.

• 대한한의학방제학회지
• /
• 제14권1호
• /
• pp.82-104
• /
• 2006

Objectives: The aim of this study is to find the therapeutic meaning of the Pyrite in herbal medication. Methods: About the origin, the component, the processing the drug, the properties and tastes of drugs, the meridian tropism, the effects, the treating disease, the contraindication and the method of administration. We have researched thirty three literatures to mention the pyrite in time sequence. Results: 1. The pyrite belongs to the metallic herbs and it consists of Iron sulfide, sometimes containing small amounts of cobalt, nickel. silver, and gold. 2. The processing the drug are the tempering, the annealing with vinegar. the refining drug with water or RADIX GLYCYRRHIZAE and et cetra, and accoring to these methods, the pyrite classified into three groups - the rough pyrite, the tempered pyrite, the annealed pyrite. 3. The properties and tastes of drugs is pungent and regular. If pyrite is well refine, it is nearly safe form the metallic virulence. the meridian tropism is mainly liver meridian. 4. From old times, pyrite has come into general use to treat the injury of muscles and tendons and bone facture because it is effective on dissipating blood stasis, alleviating pain and reunion of bone, muscles and ligament. 5. When the symptom is gone, a medicine to contain pyrite must be stoped taking. Because of pyrite's effect on regulateing Gi and promoting blood flow. Conclusions: This study showed that the pyrite is useful herb to treat the injury of muscles and tendons and bone facture.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.218.2-218.2
• /
• 2014

그래핀은 높은 전기 전도도와 열전도도, 기계적 강도를 가지고 있고 동시에 높은 전자이동도($200,000cm^2{\cdot}V{\cdot}^1{\cdot}s{\cdot}^1$) 특성을 갖는 물질로써 차세대 소재로 각광받고 있다. 하지만 그래핀을 소자에 응용하기 위해서는 전사공정과 lithography 공정 과정에서 발생되는 PMMA(Poly methyl methacrylate) residue를 완벽하게 제거해야 하는 문제점이 있다. 특히, lithography 공정 중 완벽하게 PMMA residue 가 제거되지 않고 잔류해 있을 경우에 소자의 life time, performance에 악영향을 준다는 보고가 있다. 이와같은 문제를 해결하기 위해 화학적 cleaning, 열처리를 통한 cleaning, 전류 인가에 의한 cleaning과 같은 방법들을 이용하여 그래핀의 PMMA residue를 제거하는 공정들이 보고되고 있지만, 화학적 cleaning 방법의 경우 chloroform 이라는 독성물질 사용으로 인해 산업적으로 응용이 어렵고, 열처리 방법은 전극 등의 금속이 $200^{\circ}C$ 이상의 높은 온도에서 장시간 노출될 경우 쉽게 손상을 입으며, 전류 인가에 의한 cleaning 방법은 국부적으로만 효과를 볼 수 있기 때문에 lithography 공정 후 PMMA residue를 효과적으로 제거하기에는 한계를 보이고 있다. 본 연구에서는 Ar을 이용하는 Ion beam 시스템을 통해 beam energy를 제어함으로써 PMMA residue를 효과적으로 제거하는 연구를 진행하였다. 최적화된 플라즈마 발생 조건을 찾기 위해 QMS(Quadrupole Mass Spectrometer)를 이용하여 입사하는 ion energy와 flux 양을 컨트롤 하였고, 250 W에서 최적화된 ion energy distribution 영역이 존재한다는 것을 확인할 수 있었다. 또한, 25 Gauss 정도의 electro-magnetic field를 이용하여 Ar의 ion energy를 10 eV 이하로 낮추어 damage를 최소화함으로써 효과적으로 그래핀을 cleaning 할 수 있었다. Cleaning과정에서 ion bombardment에 의해 발생한 damage는 $250^{\circ}C$에서 6시간 동안 annealing 공정을 거치면서 회복되는 것을 Raman spectroscopy의 D peak ($1335cm{\cdot}^1$) / G peak ($1572cm{\cdot}^1$) ratio 로 확인할 수 있었고, PMMA residue의 cleaning 여부는 G peak ($1580cm{\cdot}^1$)의 blue shift와 2D peak ($2670cm{\cdot}^1$)의 red shift를 통해 확인하였다. 그리고 AFM (Atomic Force Microscopy)을 이용하여 cleaning 공정과정에서 RMS roughness가 4.99 nm에서 2.01 nm로 감소하는 것을 관찰하였다. 마지막으로, PMMA residue의 cleaning 정도를 정량적으로 분석하기 위해 XPS (X-ray Photoelectron Spectroscopy)를 이용하여 sp2 C-C bonding이 74.96%에서 87.66%로 증가함을 확인을 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.398.1-398.1
• /
• 2014

The $Cu_2ZnSnSe_4$ (CZTSe) thin films solar cell is one of the next generation candidates for photovoltaic materials as the absorber of thin film solar cells because it has optimal bandgap (Eg=1.0eV) and high absorption coefficient of $10^4cm^{-1}$ in the visible length region. More importantly, CZTSe consists of abundant and non-toxic elements, so researches on CZTSe thin film solar cells have been increasing significantly in recent years. CZTSe thin film has very similar structure and properties with the CIGS thin film by substituting In with Zn and Ga with Sn. In this study, As-deposited CZTSe thin films have been deposited onto soda lime glass (SLG) substrates at different deposition condition using Pulsed Laser Deposition (PLD) technique without post-annealing process. The effects of deposition conditions (deposition time, deposition temperature) onto the structural, compositional and optical properties of CZTSe thin films have been investigated, without experiencing selenization process. The XRD pattern shows that quaternary CZTSe films with a stannite single phase. The existence of (112), (204), (312), (008), (316) peaks indicates all films grew and crystallized as a stannite-type structure, which is in a good agreement with the diffraction pattern of CZTSe single crystal. All the films were observed to be polycrystalline in nature with a high (112) predominant orientation at $2{\theta}{\sim}26.8^{\circ}$. The carrier concentration, mobility, resistivity and optical band gap of CZTSe thin films depending on the deposition conditions. Average energy band gap of the CZTSe thin films is about 1.3 eV.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.819-824
• /
• 2003

The Al-7.7Zn-2.0Mg-1.9Cu-0.1Zr-0.1Sc alloy exhibited excellent elongation by the new thermomechanical treatment (TMT) process; solution treatment and furnace cooling\longrightarrowhot and cold rolling and then annealing for short time. Tensile test at high temperature from 430 to $500^{\circ}C$ has been performed with various strain rates using for the Al-7.7Zn-2.0Mg-1.9Cu-0.1Zr-0.1Sc alloy obtained by the TMT process. The elongation of the Al-7.7Zn-2.0Mg-1.9Cu-0.1Zr-0.1Sc was 550% tensile tested at $470^{\circ}C$ temperature and 2.2 $\times$ $10^{-3}$ $s^{-1}$ strain rate. The m value of Al-7.7Zn-2.0Mg-1.9Cu-0.1Zr-0.1Sc alloy deformed 85% increased from 0.33 to 0.46 with increasing total elongation. This new TMT process was very simple and easy to make the sheets in the company.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.56-56
• /
• 1999

For advanced TFT-LCD manufacturing processes, dry etching of thin-film layers(a-Si, $SiN_x$, SID & gate electrodes, ITO etc.) is increasingly preferred instead of conventional wet etching processes. To dry etch Al gate electrode which is advantageous for reducing propagation delay time of scan signals, high etch rate, slope angle control, and etch uniformity are required. For the Al gate electrode, some metals such as Ti and Nd are added in Al to prevent hillocks during post-annealing processes in addition to gaining low-resistivity($<10u{\Omega}{\cdot}cm$), high performance to heat tolerance and corrosion tolerance of Al thin films. In the case of AI-Nd alloy films, however, low etch rate and poor selectivity over photoresist are remained as a problem. In this study, to enhance the etch rates together with etch uniformity of AI-Nd alloys, magnetized inductively coupled plasma(MICP) have been used instead of conventional ICP and the effects of various magnets and processes conditions have been studied. MICP was consisted of fourteen pairs of permanent magnets arranged along the inside of chamber wall and also a Helmholtz type axial electromagnets was located outside the chamber. Gas combinations of $Cl_2,{\;}BCl_3$, and HBr were used with pressures between 5mTorr and 30mTorr, rf-bias voltages from -50Vto -200V, and inductive powers from 400W to 800W. In the case of $Cl_2/BCl_3$ plasma chemistry, the etch rate of AI-Nd films and etch selectivity over photoresist increased with $BCl_3$ rich etch chemistries for both with and without the magnets. The highest etch rate of $1,000{\AA}/min$, however, could be obtained with the magnets(both the multi-dipole magnets and the electromagnets). Under an optimized electromagnetic strength, etch uniformity of less than 5% also could be obtained under the above conditions.