• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.438-447
• /
• 2020

The critical micelle concentration (CMC) values of the mixed surfactant systems and the solubilization conatant (K_s) values of 4-ethylaniline in those solutions were measured and analyzed by the UV-Vis method. As a result, the mixed surfactant systems of TTAB/LSB and TTAB/TX-100 did not deviate significantly from ideal mixed micellization. However, the mixed systems of SDS/LSB and SDS/TX-100 showed great negative deviations from ideal mixed model. These differences showed that the intensity of the interaction between two components in the mixed micelle was different for each mixed system and that these differences greatly influenced the solubilization of 4-ethylaniline by a mixed surfactant system. Among pure surfactants, an anionic surfactant such as SDS showed a greater K_s value than other ionic surfactants, and the K_s value by each surfactant system decreased in the order of SDS≫TTAB≧LSB>TX-100. In addition, the K_s values of all the mixed surfactant systems were higher than those of the pure surfactants constituting the mixed systems.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.446-451
• /
• 1997

The primary alcohol groups of four kinds of polysaccharides (com starch, rice starch, sweet potato starch, and cellulose), with different structures and water solubilities, were oxidized to carboxyl groups using 2,2,6,6-tetramethyl-1-piperidine oxoammonium ion (TEMPO) at $25^{\circ}C$. The optimum pH, TEMPO content, and NaBr content for the TEMPO/hypobromite-catalyzed oxidation of the polysaccharides were $10.5{\sim}11.0$, 10 mmol/mol primary alcohol, and 0.49 mmol/mol primary alcohol, respectively. The oxidation degree for the primary alcohol group was more than 90% for all four kinds of the polysaccharides. The oxidation process greatly increased the water solubility of the polysaccharides. Water-insoluble polysaccharide such as cellulose became water-soluble to the extent of 8.42% (w/v). And also, the polysaccharides with very low water solubility (less than 0.10% (w/v)) such as com starch, rice starch, and sweet potato starch had high water solubility of approximately 45%(w/v). The gel-forming abilities with calcium ion were determined. The oxidized polysaccharides are new anionic polymers with unique structures that could have application as gums, gels, and films.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1121-1126
• /
• 2002

Two anhydrous crystal structures of fully dehydrated Cd2+ - and Cs+ -exchanged zeolite X, Cd32Cs28Si100Al92O384 (Cd32Cs28-X: a = 24.828(11) $\AA)$ and fully dehydrated Cd,sup>2+ - and Rb+ -exchanged zeolite X, Cd28Rb36Si100Al92O384 (Cd28Rb36-X: a = 24.794(2) $\AA$), have been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd3 at $21(1)^{\circ}C.$ The structures were refined to the final error indices, R1 = 0.058 and R2 = 0.065 with 637 reflections for Cd32Cs28-X and R1 = 0.086 and R2 = 0.113 with 521 reflections for Cd28Rb36-X for which I > $3\sigma(I)$. In the structure of Cd,sub>32Cs28-X, 16 Cd2+ ions fill the octahedral sites I at the centers of the double six rings (Cd-O = $2.358(8)\AA$ and O-Cd-O = $90.8(3)^{\circ}$ ). The remaining 16 Cd2+ ions occupy site II (Cd-O = $2.194(8)\AA$ and O-Cd-O = $119.7(4)^{\circ})$ and six Cs+ ions occupy site II opposite to the single six-rings in the supercage; each is $2.322\AA$ from the plane of three oxygens (Cs-O = 3.193(13) and O-Cs-O = $73.0(2)^{\circ}).$ Aboutten Cs+ ions are found at site II', $1.974\AA$ into the sodalite cavity from their three oxygen plane (Cs-O = $2.947(8)\AA$ and O-Cs-O = $80.2(3)^{\circ}).$ The remaining 12 Cs+ ions are distributed over site III' (Cs-O = 3.143(9) and O-Cs-O= $59.1(2)^{\circ})$. In the structure of Cd28Rb36-X, 16 Cd2+ ions fill the octahedral sites I at the center of the double-sixrings (Cd-O = 2.349(15) and O-Cd-O = $91.3(5)^{\circ}$ ). Another 12 Cd2+ ions occupy two different II sites (Cd-O = $2.171(18)/2.269(17)\AA$ and O-Cd-O = $119.7(7)/113.2(7)^{\circ}).$ Fifteen Rb+ ions occupy site II (Rb-O = $2.707(17)\AA$ and O-Rb-O = $87.8(5)^{\circ}).$ The remaining 21 Rb+ ions are distributed over site III' (Rb-O = $3.001(16)\AA$ and O-Rb-O = $60.7(4)^{\circ})$. It appears that the smaller and more highly charged Cd2+ ions prefer sites I and Ⅱ in that order, and the larger Rb+ and Cs+ ions, which are less able to balance the anionic charge of the zeolite framework, occupy sites II and II' with the remainder going to the least suitable site in the structure, site III'.The maximum Cs+ and Rb+ ion exchanges were 30% and 39%, respectively. Because these cations are too largeto enter the small cavities and their charge distributions may be unfavorable, cation-sieve effects might appear.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.97-100
• /
• 1992

The optimum condition for the extraction of antimicrobial substance from Lithospermi radix was investigated. For the purpose of obtaining basic data for the development of natural preservatives and for the prevention of food poisoning accidents, its antimicrobial activity was tested against several kinds of saprophytic microbes and food poisoning bacteria. The optimum condition for extraction of antimicrobial substance was to steep Lithospermi radix into 95% ethanol for 24 hours at room temperature. Antimicrobial activity was observed at the pH range $5.0{\sim}8.0$, but its activity became stronger at acidic condition. The result of ion exchange chromatography was showed that the antimicrobial activity of anionic portion was more apparent than that of cationic portion. The antimicrobial activity against Gram positive bacteria was stronger than that of Gram negative bacteria and the growth of food poisoning bacteria such as S. aureus and V. parahaemolyticus was inhibited in the concentration of 0.1% for 48 hours. As for mold and yeast, the growth of some kinds of these organisms was inhibited in the concentration of 0.1 % for 48 hours and the growth of nearly all the fungi was inhibited in the concentration of 0.15% for 96 hours.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2011

This study was conducted to confirm the adsorption capacity of CFW(Carbonized Foods Waste), which is produced by the process of recycling waste, in PRB method that Electrokinetic(E/K) method was applied. The batch test was carried out to analyze the adsorption characteristics of CFW for adsorbing the organic compounds. The organic compounds used in the batch test were Phenanthrene and Trichloroethylene(TCE), and the anionic surfactant(SDS) and the nonionic surfactant(Brij$^{(R)}$30) were used for the surfactants. The results of the batch test confirmed that the adsorption efficiency of Phenanthrene was 99% and TCE was 26%. The each compounds compared with the adsorption isotherms, which is calculated by the Langmuir and Freundlich models. The results indicated that Phenanthrene is fitted to the linear Langmuir model, whereas the distribution of TCE is unclear. The results of the batch test used in surfactants confirmed that the adsorption efficiency of CFW using Phenanthrene was reduced to 6~8%. However, the adsorption efficiency of CFW in TCE was increased up to 81% by surfactants. Especially, the nonionic surfactant was excellent in the adsorption of CFW using TCE. Nevertheless, the adsorption efficiency of CFW in Phenanthrene was still higher than TCE. Therefore, the adsorption efficiency of CFW in Phenanthrene was better than in TCE. In PRB method using E/K method, the adsorption of CFW used nonionic surfactant is better to use than the anion surfactants on the organic compounds.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.325-331
• /
• 1994

PGA is formed in a route of CO2 fixation of RuBP catalyzed by RuBPCase, followed by reduction of the PGA by NADH to GAP This reduction is enhanced in an anionic micellar solution(SDS), in which NADH is distributed in the aqueous and the micellar pseudophases in a given ratio. This micellar bounded NADH reacts to PGA, and in higher micellar concentration than $1.25{\times}10^{-2}M$, most of NADH is oxidized to NAD+ by PGA. On the other hand, in the solutions of the positive ionic(CTABr), zwitter ionic(Chaps) and nonionic (Brij and Triton X-100) micelles, the reactions are also enhanced and the concentrations of NADH reach minima with micellar concentrations. Such minima are typical of micellar catalyzed bimolecular reactions, and the fall in concentrations of the reductant followed by a gradual increase is charataristic of reactions of hydrophobic substrates: that is, the reductions of PGA by NADH are sharply enhanced in a range of the lower micellar concentrations, and NADH amounts in ca. $1.25-2.50{\times}10^{-3}M$ micellar solutions are reached to minima, followed by gradual increases of the reductant concentration.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.183-191
• /
• 2010

The phase changes of 1-palmitoyl-$d_{31}$-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC_$d_{31}$) bilayers distorted by an antimicrobial peptide, a magainin 2 or an aurein 3.3 were investigated by using $^2H$ solid-state NMR (SSNMR) spectroscopy. From the theoretical simulation of the experimental $^2H$ solid-state NMR spectra the geometric structure constants and the lateral diffusion coefficients were obtained in the peptide-lipid mixture phases. Within five days of the peptide action on the lipid bilayers only the distorted alignment of the bilayers were measured but after 100 days an elliptic toroidal pore structure and an inverted hexagonal phase were formed in the presence of magainin 2 and aurein 3.3, respectively. In order to investigate the effect of an anionic lipid molecule on the actions of two peptides on the lipid bilayer, the same experiments were performed on the POPC_$d_{31}$/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) bilayer and the significant differences in the actions of two peptides on two bilayers of POPC_$d_{31}$ and POPC_$d_{31}$/POPG were measured.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.127-133
• /
• 2004

We have studied the surface micelle formation of polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) at the air-water interface. A series of four PS-b-P2VPs were synthesized by anionic polymerization, keeping the PS block length constant (28 kg/㏖) and varying the P2VP block length (1, 11, 28, or 59 kg/㏖). The surface pressure-area ($\pi$-A) isotherms were measured and the surface morphology was studied by atomic force microscopy (AFM) after Langmuir-Blodgett film deposition onto silicon wafers. At low surface pressure, the hydrophobic PS blocks aggregate to form pancake-like micelle cores and the hydrophilic P2VP block chains spread on the water surface to form a corona-like monolayer. The surface area occupied by a block copolymer is proportional to the molecular weight of the P2VP block and identical to the surface area occupied by a homo-P2VP. It indicates that the entire surface is covered by the P2VP monolayer and the PS micelle cores lie on the P2VP monolayer. As the surface pressure is increased, the $\pi$-A isotherm shows a transition region where the surface pressure does not change much with the film compression. In this transition region, which displays high compressibility, the P2VP blocks restructure from the monolayer and spread at the air-water interface. After the transition, the Langmuir film becomes much less compressible. In this high-surface-pressure regime, the PS cores cover practically the entire surface area, as observed by AFM and the limiting area of the film. All the diblock copolymers formed circular micelles, except for the block copolymer having a very short P2VP block (1 kg/㏖), which formed large, non-uniform PS aggregates. By mixing with the block copolymer having a longer P2VP block (11 kg/㏖), we observed rod-shaped micelles, which indicates that the morphology of the surfaces micelles can be controlled by adjusting the average composition of block copolymers.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.218-224
• /
• 2000

The antimicrobial activities of chitosan oligosaccharide(chitohexaose) and two types of chitosans M.W.(10,000 and M.W. 100,000) were examined against Escherichia coli O157 : H7(ATCC 43894), Staphylococcus aureus(ATCC 144458) and Candida albicans(KFRI 432). Chitosan with molecular weight of 10,000 showed the strongest antimicrobial activities to E. coil O157 : H7 and S. aureus, whereas chitohexaose acted most strongly against C. albicans. The most effective concentration of chitosan was measured to be 0.1 mg/mL for E. coil O157 : H7 and S. aureus, and that of chitohexaose to be 1 mg/mL for C. albicans. Antimicrobial activities of chitosans and chitohexaose were maintained for 60 min after their treatment. They were found to induce leakage of intracellular proteins and nucleic acids from treated microorganisms. The efflux determined by assaying the ${\beta}-galactosidase$ leaked from the lactose-induced E. coli O157 : H7 cells was observed to reach the highest level within 60 min after treatment with the antimicrobial agents and chitosan with 10,000 molecular weight gave the highest ${\beta}-galactosidase$ activity. Therefore, it is supposed that the antimicrobial activity of chitosan with its unique polycationic nature might be caused by its binding to anionic component(s) of the cell envelope and thereby inhibiting the membrane metabolism and/or leaking intracellular materials.