• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.35-41
• /
• 2021

In this study, the effect of zwitterionic surfactant on Cu electrodeposition was investigated through cyclic voltammetry. With the addition of (dodecyldimethylammonio)propanesulfonate (DDAPS) as a representative zwitterionic surfactant in the electrolyte for Cu electrodeposition, the electrochemical Cu²⁺ reduction was inhibited on Cu and glassy carbon electrodes. Its inhibition effect was similar to that of cationic surfactant rather than anionic surfactant. Moreover, DDAPS interacted with chloride ion and exhibited the mass transfer-dependent inhibition behavior, which indicates that its inhibition function is associated with the formation of its surface aggregates on anion-covered Cu surface. In addition, adsorbed DDAPS slightly reduced the surface roughness of Cu electrodeposits. These characteristics were similar to those of cationic surfactant, but less obvious. It means the effect of DDAPS on Cu electrodeposition originates from the cationic head group which is shield by anionic head group.

• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.7-13
• /
• 2001

The interaction of benzenesulfonate anion and its derivatives ($C_6H_5SO_3^-, p-$CH_3C_6H_4SO_3^-, and $p-C_2H_5C_6H_4SO_3^-$) with the micellar system of cationic surfactant TTAB(tetradecyltrimethylammonium bromide) was studied by UV/Vis spectrophotometric method. The solubilization constants($K_s$) of benzenesulfonate anions into the micellar phase of this surfactant have been measured with the change of temperature. The effects of additives(n-pentanol and NaBr) on the solubilization of benzenesulfonate anions by this surfactant system have been also measured. There was a great decrease on the values of $K_s$ and CMC simultaneously with these additives so that the measured values of ln$K_s$ were linear relationships with the values of lnCMC. For the thermodynamic study, various thermodynamic parameters(${\Delta}G^0_s$, ${\Delta}H^0_s$ and ${\Delta}S^0_s$) have been calculated and analyzed from the dependence of Ks values on temperature.

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.383-390
• /
• 1998

The interaction of phenoxide anion with several cationic surfactant micelles (DTAB, TTAB, CTAB, CDEAB, and CTAC) was studied by UV/Vis spectrophotometric method. The solubilization constants of phenoxide anion into the cationic micellar phase and the critical micelle concentration of these surfactants in the presence of the phenoxide anion could be determined from the absorbance changes. The measured solubilization constants were changed according to the following order: $K_s(CTAC)>K_s(CDEAB)>K_s(CTAB)>K_s(TTAB)>K_s(DTAB).$ Effects of salts(NaCl and NaBr) and n-alcohols(butanol, pentanol, and hexanol) on the solubilization of phenoxide anion by the TTAB system have been also measured and analyzed. There was a great decrease of solubilization constant and CMC with these additives. The standard Gibbs free energy, enthalpy, and entropy changes for the solubilization of phenoxide anion by the TTAB system were calculated from the temperature dependence of $K_s$ values.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1260-1264
• /
• 1997

The phase-transfer reagent (PTC), ethyl tri-n-octylammonium bromide (ETABr), strongly catalyzes the reaction of p-nitrophenyldiphenylphosphinate (p-NPDPIN) with benzimidazole (BI) and its anion (BI-). In ETABr solutions, the dephosphorylation reactions exhibit higer than first order kinetics with respect to the nucleophile, BI, and ETABr, suggesting that reactions are occuring in small aggregates of the three species including the substrate, whereas the reaction of p-NPDPIN with OH- is not catalyzed by ETABr. This behavior for the drastic rate-enhancement of the dephosphorylation is refered as 'aggregation complex model' for reactions of hydrophobic organic phosphinates with benzimidazole in hydrophobic quarternary ammonium salt solutions.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.335-340
• /
• 2011

The solution properties of sodium n-dodecyl sulfate, as an anionic surfactant in the presence of a cationic watersoluble 5, 10, 15, 20-tetrakis (N-methylpyridinium-4-yl) porphyrin (TMPyP) has been comprehensively studied by means of conductometry, UV-vis and resonance light scattering (RLS) spectroscopies. The results represent the decreasing of critical micelle concentration of SDS solution due to increasing of TMPyP concentration. The stabilization of SDS micelle is due to neutralization of negative charge at the micelle surface. The presence of three different species of TMPyP in SDS solution has been unequivocally demonstrated: free porphyrin monomers, porphyrin monomers or aggregates bound to the micelles, and nonmicellar porphyrin/surfactant aggregates. Our results show SDS induced an aggregation in TMPyP. In fact two kinds of J-aggregations were observed: one of them for porphyrin monomers or aggregates bound to the micelles and the other for nonmicellar porphyrin/surfactant aggregates. However, the results represent the electrostatic interaction of TMPyP with SDS anion below the cmc.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.80-84
• /
• 2005

Many important properties in colloidal systems are usually determined by surface charge ($\zeta$-potential) of the contacted solid surface. In this study, $\zeta$-potential of glass $\mu$-channel was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass $\mu$-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The $\zeta$-potential in the glass $\mu$-channel was measured for two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and $\zeta$-potential in the glass surface was also studied. In the range of $0\∼6$mM, the surfactant SDS was added to NaCl solution in four different mole concentrations. As a result, the addition of SDS increases $\zeta$-potential in the surface of the glass $\mu$-channel. The measured $\zeta$-potential was found to vary from-260 to-70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The $\zeta$-potential has a positive sign for the negative particles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.935-941
• /
• 2006

Many important properties in colloidal systems are usually determined by surface charge $({\zeta}-potential)$ of the contacted solid surface. In this study, ${\zeta}-potential$ of glass ${\mu}-channel$ was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass f-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The ${\zeta}-potential$ in the glass ${\mu}-channel$ was measured fur two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and f-potential in the glass surface was also studied. In the range of $0{\sim}6mM$, the surfactant SDS was added to NaCl solution in few different mole concentrations. As a result, the addition of SDS increases ${\zeta}-potential$ in the surface of the glass ${\mu}-channel$. The measured $\zeta-potential$ was found to vary from -260 to -70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The ${\zeta}-potential$ has a positive sign for the negative particles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1739-1744
• /
• 2008

Non-toxic orgarnic inorgarnic complex green pigment using Fluidized Bed Vapor Deposition(FB-VD) process was developed to alternate green pigment used heavy metals chrome and lead in present domestic. Kaolin materials and $CaCO_3$ were used as supporter of pigment and surface and compositions of supporters were characterized by SEM and EDXS, respectively. Various kind of surface active agents(surfactants) were also used to optimize the dry condition or color revelation. Results showed that anion type surfactant is most suitable for dry and color revelation of pigment.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.369-379
• /
• 1998

Background: Platelet-activating factor(PAF) might play an important role in the development of acute respiratory distress syndrome. Since PAF induced lung injury is similar to changes of acute respiratory distress gyndrome, and abnormalities in surfactant function have been described in acute respiratory distress syndrome, the authors investigated the effects of PAF on the regulation of surfactant protein A, B and C mRNA accumulation Method: The effects of PAF on gene expression of surfactant protein A, B and C in 24 hours after intratracheal injection of PAF in rats. Surfactant protein A, B and C mRNAs were measured by filter hybridization. Results: The accumulation of SP-A mRNA in PAF treated group was significantly decreased by 37.1 % and 41.6%, respectively compared to the control group and the group treated with Lyso-PAF(p<0.025, p<0.01). The accumulation of SP-B mRNA in PAF treated group was decreased by 18.7% and 32.2 %, respectively compared to the control group and the group treated with Lyso-PAF but statistically not significant. The accumulation of SP-C mRNA in PAF treated group was significantly decreased by 30.7% and 38.5%, respectively compared to the control group and the group treated with Lyso-PAF(p<0.l, p<0.01). Conclusion: These findings represent a marked inhibitory effects of platelet-activating factor on surfactant proteins expression in vivo. This supports, in turn, 'platelet-activating factor might be related to pathogenesis of acute respiratory distress syndrome.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.151-158
• /
• 2011

Bubbles within the foamed concrete manufactured by pre-foaming method is the main factor which affects the physical properties of foamed concrete such as density, strength, and porosity. Although many researches on foamed concrete have been continuously carried out, insufficient number of researches on the properties related to bubbles in the foamed concrete has been performed except for chemical application related researches. In order to make an optimal foamed concrete, study on the bubble properties must be pursued. In order to effectively implement bubbles in the manufacturing of foamed concrete, the bubble properties must be estimated. In this study, in order to determine the bubble properties, examination of the bubble properties according to types and foaming agent concentration was performed. An foaming agent used for this test were anionic surfactant, rosin, and protein system with the foaming agent concentration range of 0.05~13%. Test parameters considered in the study were foaming rate, foam volume, drainage solution volume, and bubble size. The study results showed that, regardless of foaming agent type, higher concentration of foaming agent showed an increase in the foaming rate. Also, the results showed that concentration of foaming agent affected bubble size, drainage solution volume change, and bubble distributions. With respect to the stability of the bubble, protein foaming agent was better than anion surfactant or rosin foaming agent. With respect to the bubble shape, anion surfactant and rosin formed bubbles had polygon shape where as protein formed bubbles had spherical shape.