• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.115-131
• /
• 2000

In the study of craniofacial deformity, it is very important that identifying the factor which can affect the morphology and which is closely related to the morphology, because it can not only improve the comprehension of growth and developmental process but also be applied in growth prediction and treatment modality. Several investigators have already mentioned the characterstics of head posture and airway space in relations to morphologic difference. But it is very meaningful work in clarifying the correlation between morphology, head posture and airway space that observing the change of head posture after morplologic change caused by operation and the change of airway space after same procedure. To investigate above correlation, I selected normal group which is consisted of 43 adults and mandibular prognathism group which is consisted of 47 adults who had been operated by sagittal split ramus osteotomy and were followed up more than 1 year. With their lateral skull radiograghs, reference lines which can evaluate each measuring points and areas without effect of postural change were first determined. And using above reference lines, change of airway space, positional change of tongue and hyoid, change of cranial and cervical angulations were measured. The results obtained from the study were as follows 1. In the change of head posture, the position of tongue and hyoid neighboring to pharynx is more closely related to the reference line of cervical column than to reference line of cranium. 2. After mandibular setback operation, the airway dimension was decreased to 81.6% of preoperative state at 1 month postoperatively and was slightly increased to 89.7% at 1 year postoperatively. 3. Posterior movement of tongue plays important role in decrease of airway dimension and inferior movement of hyoid was closely correlated with posterior movement of tongue. 4. Postoperative anterior movement of mandible, namely, morphologic relapse had correlation with relapse phenomenon of airway dimension. 5. Craniocervical angulation increased postoperatively. Especially in the postoperative early state, there was increased foreward inclination of cervical angulation rather than increase of cranial angulation. But at postoperative 1 year it was observed that cervical inclination was returned to preoperative state and cranial angulation was increased gradually. 6. Increase rate of airway dimension was correlated with the increase of cranial angulation from postoperative 1 month to 1 year. In conclusion, relapse tendency of airway dimension following increase of cranial angulation was found after mandibular setback operation and it is considered that increase of cranial angulation is one of compensatory mechanism in airway maintenance.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.127-131
• /
• 2007

Purpose: To measure the differences of the splint pin angulation and the position of the planned implant site after conventional tomographic analysis. Materials and Methods: The angulation and the location of the metal splint pin retained in acrylic stent were compared with the corrected angulation and the location of the implant fixture on the 331 tomographic images. Results: The stent pins were located buccal in 40%, lingual in 10% to the corrected implant site after analysis of the conventional tomographic image. The angle and the location of the maxillary splint pin were mainly directed buccal on incisor and canine regions. The angle and the location of the splint pins in premolar and molar regions needed less corrections in both maxilla and mandible. Conclusions: This study demonstrated that the use of tomographs was essential for successful dental implant planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.1
• /
• pp.22-29
• /
• 2015

The purpose of this study was to evaluate the eruption patterns of mandibular premolars associated with dentigerous cysts after marsupialization regarding the depth, angulation and root development of impacted teeth. Spontaneous eruption was found in 93% of mandibular premolars after marsupialization. Eruption speed and rate of angulation change were greater in mandibular premolars associated with a cyst than those on the non-cyst side. The group with less matured roots tended to have greater eruption speed and angulation change. The eruption speed and angulation change declined rapidly during the first 6 months after marsupialization. Based on the results of this study, it might be possible to predict the eruption pattern of mandibular premolars associated with a cyst after marsupialization, which would be useful for treatment planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.373-384
• /
• 2003

The purpose of this study was to evaluate the eruption pattern of a cyst-associated mandibular premolar after marsupialization of a dentigerous cyst in children. The result from the twenty two pairs of normalized panoramic radiographs of twenty two patients who underwent neither extraction nor orthodontic traction of the cyst-associated mandibular after marsupialization were as follows. 1. The eruption speed of a cyst-associated premolar was 3.5 times faster than that of the normal contra-lateral premolar(p<0.05). The angulation change of test group was an average of $2.7^{\circ}$ per month. 2. In the change of the level of root formation, the group which had a little root maturity tended to be faster in the eruption speed(p>0.05) and the R1/4 group had a great change in the angulation change(p>0.05). 3. In the change to be with the cusp position index, the eruption speeds were increased to the 30% deviation groups. But, the eruption speed was decreased above that(p>0.05). 4. Group with cyst diminishment rate of more than $80mm^2$ per month showed the fastest eruption speed of all(p<0.05). 5. The mesial angulated teeth in the test group were decreased more rapidly than the distal angulated teeth in the eruption speed(p>0.05). But, increased in the angulation change(p<0.05). 6. There was a tendency of faster tooth eruption with less deviation of tooth axis. Group with tooth axis deviation of less than $15^{\circ}$ showed the fastest angulation change of all(p<0.05). 7. The eruption speed and the angulation change rapidly decreased during the first 6 months following marsupialization. Based on the results of this study, a cyst-associated mandibular premolar erupted more rapidly after marsupializaton. We thought so that it's prognosis was good if the tooth had a little root maturity, a little devitation and cyst lesion healed faster. We recommend that if there is enough space for eruption, orthodontic traction and surgical treatment of the cyst-associated tooth should be postponed 6 months after marsupialization.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.316-327
• /
• 1995

The purpose of this study was to evaluate canal shaping ability and canal angulation change of K-file, straight endosonic K-file and pre curved endosonic K-file. Twenty staight canals and thirty curved canals were selected and divided into five groups according to canals curvature and canal instrumentation method. VI group was prepared by straight endosonic K-file and H1 group by K-file in straigt canals. V2 group was instrumented by straight endosonic K-file, V3 group by pre curved endosonic K-file and H2 group by precurved K-file in curved canals. Radiographs of canals were obtained before and after canal shaping. And postoperative radiographs were compared with preoperative radiographs using superimposition method. The results obtained were as follows ; l. In straight canals, K-file group demonstrated lager percentage of canal enlargement than endosonic K-file group on facial view, but reverse results exhibit on mesial view. 2. In curved canals, precurved K-file group showed largest percentage of canal enlargement, followed by precurved endosonic K-fine group and straight endosonic K-file group was smallest. 3. Percantage of canal enlargement at convex side was greater than at concave side in apical portion of each group. Especially in straight endosonic K-file group, percantage of canal enlargement at convex side and concave side showed sharply difference. 4. In angulation change, the straight endosonic K-file group exhibited the greatest its change, followed by precurved endosonic K-file group and precurved K-file group was the least. Above results suggest that K-file is more effective endodontic instrument than endosonic K-file, and that precurved file is effective for canal shaping in curved canal.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.769-779
• /
• 1995

The understanding the nature of occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have repored contact locations with respect to the tooth position. However, there are few report the variation of the occlusal contact point with change in each head position. This study analysed the number of occlusal contact point with change in each head position. 30 subject(male 17, female 13), who ahad natural occlusion and no symptoms of temporomandibular disorder, were selected. The numbers and patterns of tooth contact were recorded by silicone bite registration on stone model at four different head positions with head anguration gauge(from the supine to the upright position). The results obtained were as follows : 1. The numbers of total occlusal contact point on teeth increased to average 25, 29, 35, 42 points as head angulation was changed from the supine to the upright position against the ala-tragus line, and there was significant difference(P<0.05). 2. In the 19 subject(65%)of total 30 subject, the perforated point of the silicone bite indicated that the locus for the prime contact point moved mesially as the head angulation was changed from the supine to the upright position. 3. On the basis of the fact that the anterior occlusal contact point increase as head angulation changed from the supine to the upright position, we could find that the mandibular position is moved anteriorly.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.289-298
• /
• 2015

Objective: To evaluate and compare the effects of two appliances on the en masse retraction of the anterior teeth anchored by temporary skeletal anchorage devices (TSADs). Methods: The sample comprised 46 nongrowing hyperdivergent adult patients who planned to undergo upper first premolar extraction using lingual retractors. They were divided into three groups, based on the lingual appliance used: the C-lingual retractor (CLR) group (group 1, n = 16) and two antero-posterior lingual retractor (APLR) groups (n = 30, groups 2 and 3). The APLR group was divided by the posterior tube angulation; posterior tube parallel to the occlusal plane (group 2, n = 15) and distally tipped tube (group 3, n = 15). A retrospective clinical investigation of the skeletal, dental, and soft tissue relationships was performed using lateral cephalometric radiographs obtained pretreatment and post en masse retraction of the anterior teeth. Results: All groups achieved significant incisor and canine retraction. The upper posterior teeth did not drift significantly during the retraction period. The APLR group had less angulation change in the anterior dentition, compared to the CLR group. By changing the tube angulation in the APLR, the intrusive force significantly increased in the distally tipped tube of group 3 patients and remarkably reduced the occlusal plane angle. Conclusions: Compared to the CLR, the APLR provides better anterior torque control and canine tipping while achieving bodily translation. Furthermore, changing the tube angulation will affect the amount of incisor intrusion, even in patients with similar palatal vault depth, without the need for additional TSADs.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.74-86
• /
• 1991

The purpose of this study was to evaluate the resulting root canal angulation and shape change after using various enlarging instruments. The mesial canals (120) of extracted human mandibular 1st and 2nd molars were randomly divided into 6 groups; Control, K-type me, Heliapical me, Canal Master me, sonic and ultrasonic instrumentation group. Vertical angulation of each canal was determined by a straight line through the long axis of canal and another straight line through the apical foramen to intersect at the point where the canal began to leave the long axis of the tooth. By recording and comparing the measured angles of the each set of pre-and postinstrumentation. Then, the roots were sectioned horizontally in the apical, middle, coronal thirds and the canal shapes examined, as was the mesiodistal canal diameter as it relates to the external root surface. The results were as follows: 1. Instrumentation using K-type me group resulted in the highest mean change in angulation ($9.900^{\circ}$) (p < 0.005), while Sonic Air MM 3000 group resulted in the least degree of straightening canals ($8.250^{\circ}$) (p < 0.005). 2. Canal Master file group resulted in the best canal shape at the three levels (P < 0.005). 3. Measured minimal mesial root width produced Heliapical me group at the apical 1/3 level, Sonic Air MM 3000 group at the middle 1/3 level, Heliapical me group at the coronal 1/3 level (P < 0.005). 4. Measured minimal distal root width produced Sonic Air MM 3000 group at the apical 1/3 level (P < 0.05), Heliapical me group at the middle 1/3 level (P < 0.005), Canal Master me group at the coronal 1/3 level (P < 0.005). 5. HeIiapical me group produced more increased canal diameter than any other groups (P < 0.005).

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.51.1-51.13
• /
• 2021

Objectives: This study aimed to evaluate the effect of improper positioning single-peak and multi-peak lights on color change, microhardness of bottom and top, and surface topography of bulk fill and incremental composites after artificial aging for 1 year. Materials and Methods: Bulk fill and incremental composites were cured using multi-peak and single-peak light-emitting diode (LED) following 4 clinical conditions: (1) optimal condition (no angulation or tip displacement), (2) tip-displacement (2 mm), (3) slight tip angulation (α = 20°) and (4) moderate tip angulation (α = 35°). After 1-year of water aging, the specimens were analyzed for color changes (ΔE), Vickers hardness, surface topography (Ra, Rt, and Rv), and scanning electron microscopy. Results: For samples cured by single-peak LED, the improper positioning significantly increases the color change compared to the optimal position regardless of the type of composite (p < 0.001). For multi-peak LED, the type of resin composite and the curing condition displayed a significant effect on ΔE (p < 0.001). For both LEDs, the Vickers hardness and bottom/top ratio of Vickers hardness were affected by the type of composite and the curing condition (p < 0.01). Conclusions: The bulk fill composite presented greater resistance to wear, higher color stability, and better microhardness than the incremental composite when subjected to improper curing. The multi-peak LED improves curing under improper conditions compared to single-peak LED. Prevention of errors when curing composites requires the attention of all personnel involved in the patient's care once the clinical relevance of the appropriate polymerization reflects on reliable long-term outcomes.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.114-124
• /
• 2007

Objective: The purpose of this study was to examine how the mesio-distal angulation and the length of each tooth changes on panoramic radiograph at different bucco-lingual inclinations. Methods: After constructing an acrylic model based on the mean arch of 30 adults with normal occlusion, the wire was placed in the center of the teeth on the acrylic model. First, the wire was implanted in normal angulation and inclination and a panoramic radiograph taken. After changing the inclination from $I-5^{\circ}\;to\;I+15^{\circ}\;by\;5^{\circ}$, a panoramic radiograph was taken again and the mesio-distal angle and wire length on the panoramic radiograph were assessed. Results: When the wire was implanted at the normal angulation and inclination, the length measured in the panoramic radiograph was magnified $111{\sim}117%$ from the original length in the anterior region and $121{\sim}125%$ in the posterior region. Only the central and lateral incisors showed significant length differences when the inclination was changed from $l-15^{\circ}\;to\;I+15^{\circ}$ at fixed angulation. When the inclination was changed from $l-15^{\circ}\;to\;I+15^{\circ}$, the angulation of most teeth on panoramic radiograph appeared to be more disto-angulated than in reality, and the lateral incisor and canine showed the largest difference. Only $l-15^{\circ}\;to\;I+15^{\circ}$ groups of premolars and $I+15^{\circ}$ group of molars showed more mesio-angulation than in reality. As the labio(bucco)lingual inclination of all teeth were decreased, tooth angulation in the panoramic radiograph appeared to be more disto-angulated. Conclusion: The labio-liugual inclination of teeth should be considered because it affects panoramic image of teeth, such as length of incisors and angulation of other teeth.