• 건축역사연구
• /
• 제22권2호
• /
• pp.43-54
• /
• 2013

Compared to Early Chosun Dynasty, the spatial structure of most local Eupseongs of Korea had a standardized change with the expansion and spread of the Rye-hak(禮學:a study of confucius Rite). Meanwhile in the process of rebuilding Eupseongs there was a tendency of relocation of the local government offices(官衙) and its attached facilities in terms of functions and use. Although it was PyeongSanseong Miryang Eupseong had an unreasonable spatial structure locating Gaeksa(客舍; accommodation house for visitors) in the middle of the local government office complex, and Dongheon(東軒;main office building) in the east of it before the Japanese Invasion of Korea in 1592. However with the reorganization of spatial Structure of local Eupseongs after the Japanese invasion Gaeksa was moved to the foot of Adongsan where commanded a fine view of river. Dongheon was moved to the center of Eupseong for the effective management of its auxiliary organizations. It was because road system and administrative efficiency had a serious effect on deciding the location of the local government office and its attached facilities. After the Japanese invasion Hyangchoeng(鄕廳), having been out of Eupseong, also was moved to the independent location within Eupseong separate from Dongheon and Gaeksa. It seemed to take into account the autonomy of Hyangchoeng. Dongheon, Gaeksa, and Hyangchoeng which are the crucial facilities of Milyang Eupseong were arranged at each angular point of big triangle. In order to enhance the administative efficiency, the attached administrative facilities were arranged surrounding Dongheon and Hyangchoeng. The spatial structure of Milyang Eupseong in the late Choseon dynasty was of great difference from that of uniformly organized system of early Choseon Period. It was because the development of administrative function, the pursuit of efficiency, and commercial progress had a great impact on the change of urban space.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.53-62
• /
• 2008

본 연구는 플랫폼 다이빙 종목 205B를 3차원 영상분석을 통하여 운동학적 분석을 하였다. 총소요시간은 평균 $1.112{\pm}0.12s$로 나타났으며 여유 있는 연기를 수행하기 위해 많은 소요시간을 확보하여야 할 것으로 사료된다, 이지시 신체중심의 높이는 평균 88.8cm이며 수평거리는 144.8cm, 수평, 수직속도는 평균 1.08m/s, 1.3m/s로 나타났으며, 회전동작은 높은 위치에서 수행해야 하며, 수평거리는 짧아야 입수자세에 유리 할 것으로 판단된다. 하지분절의 속도변화는 이지 시 속도가 감소한 이후 회전이 이루어지는 시점까지 상승하며 이지 순간에는 회전보다는 점프동작에 더 큰 영향을 미치며, 신체중심을 축으로 회전동작으로 이어지고 속도가 상승하는 것으로 판단된다. 몸통각속도는 이지 시에 크게 나타났는데, 이는 상 방향으로 점프하여 회전에 필요한 힘을 얻기 위해 상체분절을 최대한 곧게 펴고 신체중심을 높게 유지하여 도약을 해야 효과적인 동작을 수행 할 수 있기 때문으로 사료된다.

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.19-23
• /
• 2011

Recently, focused ion beam (FIB) applications have been investigated for the modification of VLSI circuit, the MEMS processing, and the localized ion doping, A multi aperture FIB system has been introduced as the demands of FIB applications for high speed and large area processing increase. A liquid metal ion source has problems, a large angular divergence and a metal contamination into a substrate. In this study, a gas ion source was introduced to replace a liquid metal ion source. The gas ion source generated inductively coupled plasma (ICP) in a quartz tube (diameter: 45 mm). Ar gas fed into the quartz was ionized by a 2 turned radio frequency antenna. The Ar ions were extracted by 2 extraction grids. The maximum extraction voltage was 10 kV. A numerical simulation was used to optimize the design of extraction grids and to predict an ion trajectory. As a result, the maximum ion current density was 38 $mA/cm^2$ and the spread of ion energy was 1.6 % for the extraction voltage.

• 한국인쇄학회지
• /
• 제26권1호
• /
• pp.39-50
• /
• 2008

We have manufactured Ag pastes for gravure printing by adding different solvent contents. Then the gravure printability and properties of conductive patterns gravure-printed by the different rheology characteristics of pastes were investigated. The dispersity of pastes was increased and the viscosity and shear rate dependence of viscosity for pastes were decreased by increasing the solvent content. Also storage modulus G', loss modulus G" and angular frequency value when G" starts to be bigger than G' of pastes were increased by decreasing the solvent content. These mean a flow drop of paste. As a result of gravure printing using two plates which have different line counts(175line and 350line), conductive patterns printed using 175line were spreaded more but Ag packing, thickness and conductivity of the conductive patterns were better than those printed using 350line. And the spread values of conductive patterns were increased with solvent contents but the best properties for Ag packing, surface roughness and conductivity of the conductive pattern were obtained by paste (3) which has 550cps of viscosity at $100s^{-1}$ and tan ${\delta}$ > 1 at 10rad/s. As a result of gravure printing using 350 line plate and paste (3), the conductive pattern has $1.2{\mu}m$ of film thickness and $1.9{\times}10^{-5}{\Omega}{\cdot}cm$ of conductivity.

• 천문학회보
• /
• 제43권2호
• /
• pp.38.3-38.3
• /
• 2018

We present the results of high-resolution near-IR spectral mapping toward the Orion KL outflow. In this study, we used the Immersion Grating Infrared Spectrometer (IGRINS) on the 2.7 m Harlan J. Smith Telescope at McDonald Observatory. IGRINS's large wavelength coverage over the H & K bands and high spectral resolving power (R ~ 45,000) allowed us to detect over 35 shock-excited ro-vibrational H2 transitions and to measure directly the gas temperature and velocity of the dense outflows. In our previous study toward the H2 peak 1 region in the Orion KL outflow, we identified 31 outflow fingers from a datacube of the H2 1-0 S(1) $2.122{\mu}m$ line and constructed a three-dimensional map of the fingers. The internal extinction (${\Delta}AV$ > 10 mag) and overall angular spread of the flow argue for an ambient medium with a high density (105 cm-3). In this presentation, we show preliminary results of additional mapping toward a remarkable chain of bows (HH 205 - HH 207) farther from the ejection center, and obtain a more clear view of the shock physics of a single isolated bullet that improves on the knowledge gained from observations of the more complex peak 1 region in our earlier study.

• 한국지형학회지
• /
• 제25권4호
• /
• pp.63-75
• /
• 2018

The lower marine terrace 1 and 2 surfaces distributed between Ulsan and Pohang coast in the southeastern coast of the Korean penninsula have been correlated with MIS 5e and 5a (or 5c) by amino acid dates, 14C dates, wide-spread tephra correlation and pollen analysis respectively. In this study, to test the reliability of the OSL method for the estimation of the numerical burial age of marine sediment deposits, we analyzed the samples from the marine terraces which have been known as typical marine terraces formed during MIS 5e and MIS 5a in the above-mentioned coast. The burial ages of the marine deposit of the lower marine terrace 1 and 2, with paleoshoreline altitudes of 18m to 19m and 10m to 11m respectively, both showed about the same age of 60 ka BP. The lower marine terraces 1 and 2, however, were divided into two terrace surfaces by a clear terrace cliff. Besides, the OSL dates of the lower and upper parts of the lower marine terrace 2 of the Bonggil coast showed the reversed burial ages. In the lower marine terrace 1 of the Sanhari coast, almost the same burial ages were derived from both the lower part (marine rounded gravel layer) and the upper part (terrestrial angular gravel layer) of the terrace deposit. Therefore, at the present time, judging from only the OSL dates measured in this study, it could be argued that the OSL method is not the best for the estimation of forming periods of the lower marine terraces 1 and 2 and their classification.