• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.19-22
• /
• 2016

Leading edge thrust is generally caused by passing air flow from lower to upper surface and it is required to have sufficient angle of attack for notable leading edge thrust. To produce leading edge thrust at low angle of attack, utilizing expansion wave accompanying low pressure is able to be a solution. Fore structure changes the direction of flow, and this flow passes the projected edge. As a result, from a perspective of the edge, it is able to have high angle of attack, and artificial expansion wave is generated. This concept shows 9.48% increase of L/D in inviscid flow, at Mach number 1.3 and angle of attack $1^{\circ}$ in maximum, and this model shows the 3.98% of increasement at angle of attack $2^{\circ}$. Although advantage of the artificial expansion wave decreased as angle of attack increase, it shows the possibility of aerodynamical improvement with artificial expansion wave.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.218-224
• /
• 2011

A supersonic inlet at angle of attack has anti-symmetric pressure distribution, and it can make flow instability and structural problem. In this study, numerical analysis of three-dimensional inviscid flow was conducted under various throttle ratio and angle of attack conditions. Throttle ratio was defined as the ratio of the exit area to the smallest cross section area at inlet, and the ratio is controlled from 0 to 2.42. At various angle of attack, the characteristics of steady and unsteady flow around supersonic inlet is observed under different throttling ratios. From these results, pressure recovery curves and pressure history curves were plotted by post processing. Using pressure history data, FFT analysis is also carried out. Through these processes, it shows the tendency of pressure distribution anti-symmetricity and changing dominant frequency as increasing angle of attack.

• 한국항공우주학회지
• /
• 제37권5호
• /
• pp.511-517
• /
• 2009

본 논문에서는 null-seeking method를 사용하여 서보형 받음각 센서를 설계하고 그것의 특징을 분석하였다. Null-seeking method는 측정부의 두 압력 홀에서 측정되는 압력 차이가 0이 되도록 회전한 측정부의 동체 기준선에 대한 회전각으로 받음각을 측정한다. 이 방법은 측정 전 범위에서 높은 정확도와 일정한 오차를 가진다. 그러므로 이러한 종류의 받음각 센서는 무인항공기에 적합하다. 이 논문에서 개발될 받음각 센서의 요구사항을 분석하여, 서보형 받음각 센서를 설계 가공하였다. 그 후 받음각 센서에 탑재할 받음각 계산 알고리즘을 개발하였으며, 끝으로 MATLAB Simulink와 풍동시험을 통해 개발된 받음각 센서의 특성을 검증하였다.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.421-428
• /
• 2013

This study aims at numerically investigating the angle of attack characteristics of the rudder behind a rotating propeller. The rotating propeller of 5 blades and the full spade rudder are placed in the numerical water tunnel with a uniform flow condition to consider propeller-rudder interaction. The turbulence closure model is employed to simulate the three-dimensional unsteady incompressible viscous turbulent flow around the propeller and the rudder. The present numerical method are well verified by comparing with the experimental results. In order to identify the dependence of the angle of attack of the rudder on the rudder angle, a wide range of rudder angles is considered. The present study carried out the quantitative and qualitative analysis of the angle of attack in terms of the pressure distribution, streamlines and the evaluation of the flow incidence, resulting in that the angle of attack increases as we move from the root and the tip to the center of the rudder, regardless of the rudder angle. The distribution of the angle-of-attack along the span is strongly affected by rotating propeller flow and rudder angle. Consequently, the distribution of the angle-of-attack of the oncoming flow against the rudder leading edge plays a role in determination of rudder performance.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.976-983
• /
• 2000

The flow characteristics around an elliptic cylinder with axis ratio of AR=2 located near a flat plate were investigated experimentally to study the interaction between the cylinder wake and the turbulent boundary layer. The pressure distributions on the cylinder surface and on the flat plate were measured with varying the angle of attack of the cylinder. In addition, the velocity profiles of wake behind the cylinder were measured using a hot-wire anemometry As the angle of attack increases, the location of peak pressure on the windward and leeward surfaces of the cylinder moves toward the rear and front of the cylinder, respectively. At positive angles of attack, the position of the minimum pressure on the flat plate surface is moved downstream, but it is moved upstream at negative angles of attack. With increasing the angle of attack, the vortex shedding frequency is gradually decreased and the critical angle of attack exists in terms of the gap ratio. By installing the elliptic cylinder at negative angle of attack, the turbulent boundary layer over the flat plate is disturbed more than that at positive incidence. This may be attributed to the shift of separation point on the lower surface of the cylinder due to the presence of a ground plate nearby.

• 한국항공운항학회지
• /
• 제28권2호
• /
• pp.12-17
• /
• 2020

Even though the benefit of flight at high angle-of-attack is to be able to reduce the speed of flight and maneuvers in complex flight environment, the flight at high angle-of-attack, however, is easy to be in stall which is characterized by sever unsteady flow separation over an airfoil. Current unsteady numerical analysis using DES was conducted to predict the aerodynamic characteristics of a NACA 0021 airfoil at high angle-of-attack conditions. And this provides the comparison with the steady numerical one with the typical turbulence models. The unsteady calculation by DES is appropriate in terms of predicting the aerodynamic performance of NACA 0021 airfoil at high angle-of-attack conditions.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.113-121
• /
• 2005

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between $24.7^{\circ}$ and $26.2^{\circ}$, though the maximum lift force was at the angle of attack $22^{\circ}$.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.575-580
• /
• 2007

카나드 형상 고기동 항공기의 개념 설계 단계에서 높은 받음각 항공기 정적 안정성 분석을 위해 저속 소형 풍동시험을 수행하였다. 본 연구에서는 1/50축척의 일반적인 카나드-동체-날개 형상을 소형 풍동시험 모델로 사용하였다. 높은 받음각 비선형특성을 포함한 정적 안정성을 분석하기 위하여 카나드 굽힘에 따른 수직 꼬리 날개 효과를 분석하였다. 또한 높은 받음각에서 Nose Chine 효과를 분석하였다. 실험 연구에서 얻은 결과를 토대로 카나드 형상 항공기 높은 받음각 정적 안정성에 미치는 형상 변화 효과를 분석할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2754-2758
• /
• 2008

Numerical investigation has been carried out for laminar flow ($Re{\leq}150$) past a square cylinder in cross freestream with an angle of attack. This study would be the first step towards understanding flow-induced forces on cylindrical structures under a strong gust of wind from the viewpoint of wind hazards. Collecting all the numerical results obtained, we propose contour diagrams of drag/lift coefficients and Strouhal number (St) on an Re-Angle plane.

• 한국정밀공학회지
• /
• 제4권1호
• /
• pp.42-52
• /
• 1987

Experimental investigation on the characteristics of the air flow around a square prism located in a uniform flow with various angles of attack was carried out. Experimental results were obtained for the angle of attack from 0 .deg. to 45 .deg. and for Reynolds No. from $2.6{\times}^4$to $12.8^4$. Seperation and reattachment was occurred on the forward face (face AB). Reattachment phenomenon was not developed in the range of attack angle lower 13 .deg. . But, for the range, 13 .deg. .approx. 35 .deg. , the reattachment developed and its position was moved forward the angle of attack increases. Pressure distributions on the reattachment face has a maxium at the reattachment point and a minimum at the separation point. Pressurea on two back faces are nearly symmetric in spite of the changes of the angle of attack and are influenced by the turbulence in rearward flow field.