• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.182-190
• /
• 1998

Behaviour of ultra-high pressure diesel spray in a constant-volume pressure chamber was studied with injection pressure ranging from 20 to 160㎫. Sprays were observed by the right angle scattering method. As a result, the spray tip penetration is first proportional to a time, and after that, it is proportional to 0.52 of the time during at the time of injection pressure and back pressure increase. An empirical correlation was made for the parameters of injection pressure, air-fuel density ratio, spray tip distance, spray angle, jet angle of spray and max. spray width.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.3
• /
• pp.181-188
• /
• 2009

Objective : To evaluate the anatomical parameters that must be considered when performing thoracic transpedicular or extrapedicular screw fixation. Methods : We selected 958 vertebrae (1,916 pedicles) from 98 patients for analysis. Eight parameters were measured from CT scans : the transverse outer pedicular diameter, transverse inner pedicular diameter, length, angle, chord length of the pedicles and the transverse width, angle, and chord length of the pedicle-rib units. Results : The age of the patients ranged from 21 to 82 years (mean: 48.2 years) and there were 57 men and 41 women. The narrowest transverse outer pedicular diameter was at T5 (4.4 mm). The narrowest pedicle length was at T1 (15.9 mm). For pedicle angle, T1 was 31.6 degrees, which was the most convergent angle, and it showed the tendency of the lower the level, the lesser the convergent angle. The chord length showed a horizontal pattern with similar values at all levels. For the PRU width, T5 showed a similar pattern to the pedicle width at 13.4 mm. For the PRU angle, T1 was the largest angle at 46.2 degrees and the tendency was the lower the level. the narrower the angle. For chord length, T1 was the shortest at 46.9 mm and T8 was the longest at 60.1 mm. Conclusion : When transpedicular screw fixations carried out at the mid-thoracic level, special care must be taken because there is a high chance of danger of medial wall violation. In these circumstances, extrapedicular screw fixation may be considered as an alternative treatment.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.125-130
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of changes in the horizontal plane angle on the mesiodistal width ratios of the maxillary anterior teeth during the acquisition of frontal view photographs, derive these ratios for Korean adults on the basis of the data obtained, and analyze them using the Golden Proportion as a reference. MATERIALS AND METHODS. In experiment I, 30 plaster casts were mounted on an articulator and positioned on the angle-measuring device with a center setting of $0^{\circ}$. The device was rotated to $10^{\circ}$ in $1^{\circ}$ increments in a counterclockwise direction. At each angle, photographs were obtained and analyzed. Experiment II was based on 60 patients who visited the Department of Prosthodontics at Kyungpook National University Dental Hospital from February 2012 to February 2015. The patients were divided into three groups [Male (M), Female (F), Total (M + F)]. Frontal views were obtained for all groups and analyzed. RESULTS. From $1^{\circ}$ to $10^{\circ}$, the relative mesiodistal width ratios for the maxillary anterior teeth showed no significant differences from those at $0^{\circ}$. In all three groups, the relative width ratio of the maxillary central incisor was smaller than that specified in the Golden Proportion; the opposite was true for the canine. CONCLUSION. Our results suggest that the mesiodistal width ratios of the maxillary anterior teeth do not follow the Golden Proportion in Korean adults, and that a change in the horizontal plane angle from $1^{\circ}$ to $10^{\circ}$ during frontal photography does not affect these ratios.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.952-959
• /
• 2012

This study looks into the changes in collar patterns in tailored jackets with different numbers of buttons. The study discusses the pattern design method of tailored colors in 4 different styles, such as the effect of the number of buttons of tailored jackets on collar width and length, lapel width and length, and angle of lapel and overall balance in design. Through the first dress experiment, patterns were adjusted and corrected. The second dress experiment was conducted with the modified experimental clothes. The results of comparison and analysis are as follows. The 1 button tailored jacket was most preferred for its beautiful expression and overall balance of upper color and lapel when its lapel width was 7.5 cm. The second most preferred one was the 2 button tailored jacket with lapel width of 8 cm, and the 3 button jacket showed relatively good balance when its lapel width was 7.5 cm. The 4 button tailored jacket showed a bad balance in collar and button. Also, its overall silhouette was disappointing and thus was less preferred than others. For smaller number of buttons, the angle of lapel's break line increased, thus displaying a more refined and slim silhouette. On the other hand, the angle of lapel's break line decreased for greater number of buttons, thus displaying a dull and fat image. As a result, the jacket with many buttons was less preferred.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.37-45
• /
• 2015

A parametric study on the shapes of bobsleigh bumpers has been performed to reduce the aerodynamic drag. Effects of geometric parameters, such as leading angle of leading bumper, the ratio of minimum width to maximum width of leading bumper, the ratio of leading bumper length to trailing bumper length, trailing angle of trailing bumper, and the ratio of bumper height to installation location of bumper from the bottom of bobsleigh, on the aerodynamic performance of the bobsleigh were estimated using 3-D Reynolds-averaged Navier-Stokes equations. The turbulence was analyzed using the shear stress turbulence model. Reynolds number based on the hydraulic diameter of the external flow channel was in the range of 150,000~1,000,000. Numerical results for drag coefficient were validated compared to experimental data. Ranges of the five geometric parameters were determined according to the rule of Federation Internationale de Bobsleigh et de Tobaganning. The aerodynamic performance of the bobsleigh sled was most sensitive to the leading angle of leading bumper and the ratio of minimum width to maximum width of leading bumper.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.204-210
• /
• 2000

The mandibular contour determines the shape of the lower part of the face and thus influences the appearance of the face. A patient with a large, squarish, or broad face who desires a small, round, or slender face can undergo mandibular contouring surgery to reduce the width of the lower face. The successful correction of a prominent mandibular angle by conventional angle ostectomy has been reported. But, in the majority of patients with a widened facial appearance, both the mandibular angle and part of the mandibular body anterior to it are protuberant laterally, so both must be resected. The purpose of this study is to introduce a new method of performing mandibular contouring surgery, more effectively and easily, and to reduce postoperative complication and evaluate its results. We treated 6 patients who has prominent mandibular angle using multiple step osteotomy with angle-splitting ostectomy. The advantages of this new method are as following. (1) easily performable (2) effective mandibular contouring surgery by reducing the width of lower face (3) producing a natural relief of the mandibular angle (4) low risk of soft tissue damage and complications (5) shortening of the operation time. etc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.211-220
• /
• 1994

The purpose of this study was to analyze the foot type by cluster analysis for footwear. The sample size for the study was 200 college womens between age 19 and 23 in Pusan urban area. There were measured 17 items of the foot for factor analysis and cluster analysis. The result was as follows : 1. 1'here were 9 items selected by factor analysis. 2.'rho cluster analysis of the foot must be analyzed by direct and indirect measurement indivisually. 3. The cluster analysis of the direct measurement ; Cluster 1 : 1'he foot length is all much the same to mean value of this age group and the items of width and circumference are relatively small to other clusters. Cluster 2 ; The foot length is relatively small to other clusters and the items of width and circumference are all much the same to mean value of this age group. Cluster 3 ; The foot sine Is relatively large to other clusters. 4. The cluster analysis of indirect measurement ; Cluster 1 ; The (cot print angle is high find Metatarso-Phalanx angle is transformed Cluster 2 ; The foot print angle is low and Melatarso-Phalanx angle is normal. Cluster 3 : Tho foot print angle Is middle and Metatarso-Phalanx angle is all the mush same to mean value of this age group. Cluster 4 . The foot print angle Is the most value and Metatarso-Phalanx angle is normal.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.84-91
• /
• 2012

This study evaluated three forces (lifting, pushing and twisting) required to maneuver the single-wheel barrows according to handle height, width, horizontal angle and vertical angle. The four independent variables were varied in two levels. Handle height was varies in two levels : 'knuckle height (KH)' and 'KH + 0.1 ${\times}$ stature'. The two handle widths were '1.5 ${\times}$ shoulder width (SW)' and '1.75 ${\times}$ SW'. Two angles of $0^{\circ}$ and $15^{\circ}$ were used for horizontal and vertical angles. The 24 factorial design was used in the experiment. Twelve healthy male students (undergraduate and graduate) participated in the experiment. Subjects exerted three forces (pushing, lifting, and twisting clockwise) in each experimental condition. The order of 16 treatment conditions was determined randomly. Results showed that the effects of the four factors were different according to three forces. While lifting and twisting forces were higher in 'knuckle height', the pushing force was higher in 'KH + 0.1 ${\times}$ stature' (p < 0.05). Lifting and pushing forces showed higher values in the horizontal angle $0^{\circ}$ than in $15^{\circ}$. Handle width and vertical angle showed no statistically significant main effects on three forces (p > 0.05). Results of this study could be used as basic data for the ergonomic design of handle variables of one- or two-wheel barrows.

• The Research Journal of the Costume Culture
• /
• v.5 no.4
• /
• pp.112-129
• /
• 1997

This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth＋2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

• The Journal of Korean Physical Therapy
• /
• v.26 no.2
• /
• pp.56-61
• /
• 2014

Purpose: The aim of this study was to investigate relationship between the angle of the first metatarsophalangeal joint (1st MPJ) and the dimensions of the abductor hallucis; dorso-plantar (DP) thickness, medio-lateral (ML) width, and cross-sectional area (CSA), in subjects with and without hallux valgus. Methods: Sixty feet, mean (SD) age of 22.5 (2.1) years old, were included in this study (hallux valgus = 30; control = 30). An X-ray device was used for measurement of the angle of the 1st MPJ, and an ultrasound system was used for determination of mean (SD) DP thickness, ML width, and CSA of the abductor hallucis muscle in each foot from three trials. Results: The results showed the DP thickness, ML width, and CSA of the abductor hallucis did not differ significantly between subjects with and without hallux valgus. In addition, the correlations between the angle of the 1st MPJ and DP thickness, ML width, and CSA of the abductor hallucis showed poor correlation (Pearson r=-0.09, -0.20, and -0.18, respectively). Conclusion: Based on these findings, we speculate that morphological changes to the abductor hallucis muscle cannot be representative of the angle of the 1st MPJ, and also cannot be used in differentiation between subjects with and without hallux valgus.