• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.671-674
• /
• 1999

In the PWM converter, PLL(Phase Locked Loop) is usually used as a tool which senses the angle of input voltage. This is sensitive to nois and needs additional hardware. In this work, we propose a sensorless control scheme of PWM converter using EKF(Extended Kalman Filter). EKF estimates a phase angle of input voltage from nonlinear state equation using measured phase currents. We control power factor and DC-link voltage utilizing the estimated phase angle. We demonstrate the effectiveness of the proposed estimation algorithm through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.12-22
• /
• 2016

Convenience and safety are the key words for the automotive driving and various sensor technologies have been studied for enhanced perception of driving environments. In frequency modulated continuous wave (FMCW) radar systems, single antenna is enough for range and velocity detection of multiple targets. Multiple array antenna is needed for estimating direction of arrival(DoA). Using DoA estimation algorithm in time domain as in the conventional systems, it is difficult to distinguish vehicles lie in the same angle. In order to facilitate the enhanced angle estimation, DoA estimation algorithm is applied in frequency domain. In this paper, the method for applying multiple signal classification(MUSIC) algorithm in frequency domain is suggested and the performance is analyzed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.5
• /
• pp.257-263
• /
• 2022

Active stabilizers use signals such as steering angle, yaw rate, and lateral acceleration to vary the roll stiffness of the front and rear suspension depending on the vehicle's driving conditions, and are attracting attention as RSC (Roll Stability Control) system that suppresses roll when turning and improves ride comfort when going straight. Various studies have been conducted in relation to active stabilizer bars and RSC systems. However, accurate modeling of passive stabilizer model and active stabilizer model and vehicle dynamics analysis result verification are insufficient, and performance result analysis related to vehicle roll angle estimation and electric motor control is insufficient. Therefore, in this study, an accurate vehicle dynamics model was constructed by measuring the passive/active stabilizer bar model and component parameters. Based on this, the analysis result with high reliability was derived by comparing the roll angle estimation algorithm based on the lateral acceleration and suspension of the vehicle with the actual vehicle driving test result. In addition, it was intended to accurately analyze the motor torque characteristics and roll reduction effects of the electric motor-driven RSC system.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.624-629
• /
• 2023

Estimation of signal parameters via rotational invariance techniques (ESPRIT) is an algorithm that estimates the angle of a signal arriving at an array antenna using the shift invariance property of an array antenna. ESPRIT offers the good trade-off between performance and complexity. However, the ESPRIT algorithm still requires high-complexity operations such as covariance matrix and eigenvalue decomposition, so implementation with a hardware processor is essential to estimate the angle of arrival in real time. In addition, ESPRIT processors should have high performance. The performance is related to the number of antennas, and the number of antennas required for each application are different. Therefore, we proposed an ESPRIT processor that provides 2 to 8 variable antenna configurations to meet the performance and complexity requirements according to the applied field. The proposed ESPRIT processor was designed using the Verilog-HDL and implemented on a field programmable gate array (FPGA).

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2317-2319
• /
• 2001

This paper presents a sensor fusion algorithm for the RC helicopter which uses a complementary filter. To measure the attitude angle of the helicopter, 3rate gyroscopes and a 3-axis accelerometer are mounted on the helicopter. The signals from them are passed though a complementary filter to produce estimation outputs. Experiments show that designed system is effective for the attitude estimation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.57-64
• /
• 2000

In order to regulate cutting torque in milling, monitoring system should be set to a certain threshold. Radial immersion ratio is an important factor to determine the threshold and should be estimated in process for automatic regulation. In this paper, on-line estimation of the radial immersion ratio using spindle motor current in face milling is presented. When a tooth finishes sweeping, a sudden drop of cutting torque occurs. This torque drop is equal to the cutting torque acting on a single tooth at the swept angle of cut and can be acquired from cutting torque signals. Average cutting torque per revolution can also be calculated from cutting torque signals. The ratio of cutting torque acting on a single tooth at the swept angle of cut to the average cutting torque per revolution is a function of the swept angle of cut and the number of teeth. Using the magnitude of this ratio, the radial immersion ratio is estimated. Identical algorithm is adopted to estimate the immersion ratio based on the spindle motor current measurement. The experiments performed under different cutting conditions show that the radial immersion ratio can be estimated within 10% error range by the proposed method using spindle motor current. Varying immersion ratio is also estimated well using the presented algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.560-565
• /
• 2018

The SPICE (Sparse Iterative Covariance-based Estimation) algorithm estimates the azimuth angle by applying a sparse recovery method to the covariance matrix in the time domain. In this paper, we show how the SPICE algorithm, which was originally formulated in the time domain, can be extended to the frequency domain. Furthermore, we demonstrate, through numerical results, that the performance of the proposed algorithm is superior to that of the conventional frequency domain algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.725-733
• /
• 2008

This paper proposed a novel do-interlacing algorithm using all direction edges estimation technique. In the proposed algorithm. previously developed the DOI(Direction-Oriented Interpolation) algorithm was used as a basis. The do-interlacing method was divided into two main parts. First, we should estimate edge direction. Then, missing pixel: were interpolated along with the decided edge. In this paper, after estimating the edge through the DOI algorithm considering high angle edge direction, missing pixels were interpolated by using the median filter. Experimental results indicate that the proposed algorithm is superior to the conventional algorithms in terms of the objective and subjective criteria.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.944-950
• /
• 2015

Recent studies on ankle-foot prostheses used for transtibial amputees have focused on the adaptation of the ankle angle of the prosthesis according to ground conditions. For adaptation to various ground conditions (e.g., incline, decline, and step conditions), ankle-foot prostheses should first recognize the ground conditions as well as the current human motion pattern. For this purpose, the ground reaction forces and orientation angle of the tibia provide fundamental information. The measurement of the orientation angle, however, creates a challenge in practice. Although various sensors, such as accelerometers and gyroscopes, can be utilized to measure the orientation angles of the prosthesis, none of these sensors can be solely used due to their intrinsic drawbacks. In this paper, a time-varying complementary filtering (TVCF) method is proposed to incorporate the measurements from an accelerometer and a gyroscope to obtain a precise orientation angle. The cut-off frequency of TVCF is adaptively determined according to the human gait phase detected by a fuzzy logic algorithm. The performance of the proposed method is verified through experiments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.1-12
• /
• 2000

This paper proposes a new algorithm classifing same hues in order toe estimate the spectral reflectance of object from 3 band color image information. To estimate the spectral reflectance of object, the conventional estimation methods are required of 5 or 9 band digital color values. The 5 or 9 band image acquisition systems are required of 5 or 3 times same work for color image acquisition process. To solve the above problems, we propose a new method that can be estimated spectra reflectance estimation of object. The proposed method is to classify same hues corresponding a color stimulus, by using hue angle and chroma vector of a color stimulus. The classified same hues are used as the population corresponding a color stimulus. The range of same hue is estimated by the cumulative proportional ration according to the number of basis function.