• 제목/요약/키워드: Angle Changes

검색결과 1,679건 처리시간 0.041초

의류 검색용 회전 및 스케일 불변 이미지 분류 및 검색 기술 (Invariant Classification and Detection for Cloth Searching)

  • 황인성;조법근;전승우;최윤식
    • 방송공학회논문지
    • /
    • 제19권3호
    • /
    • pp.396-404
    • /
    • 2014
  • 의류 검색 분야는 의류의 비정형 특성으로 인해 매우 어려운 분야로 인식 오류 및 연산량을 줄이기 위한 노력이 많이 진행되어 왔으나 이를 위한 학습 및 인식 과정 전체에 대한 구체적인 사례가 없고 일부 관련 기술들은 아직 많은 한계를 보이고 있다. 이에 본 논문에서는 입력된 영상에서 사람 객체를 파악하여 착용한 의상으로부터 색상, 무늬, 질감 등 의상이 가질 수 있는 특성 정보를 분석하여, 이를 분류하고 검색하는 방법에 대한 전 과정을 구체적으로 보였다. 특히, 의류의 패턴 및 무늬 등을 구분하기 위한 비정형 의류 검색을 위한 LBPROT_35 디스크립터를 제안하였다. 이 제안 방식은 영상의 통계적 특징을 분석하는 기존의 LBP_ROT(Local Binary Pattern with ROTation-invariant) 방식에 추가로 원 영상에 크기 변화가 생겨도 검색해 낼 수 있도록 하는 특성이 추가된 것이며, 이를 통해 비정형 의류 검색 시 옷이 회전되어 있거나 스케일에 변화가 있어도 높은 검색율을 얻을 수 있게 되었다. 또한 색 공간을 11개의 구간으로 양자화 하는 방식을 이용하여 컬러 분류를 구현하여, 의류 검색에 있어서 중요한 컬러 유사성을 상실하지 않도록 하였다. 한편, 인터넷 상의 의류 사진들로부터 추출한 총 810장의 트레이닝 이미지로 데이터베이스를 구축하고 이들 중 36장을 질의영상으로 테스트 한 결과, 94.4%의 인식률을 보이는 등 Dense-SIFT 대비 높은 인식률을 보였다.

지표 자외선 복사 변화에 미치는 오존 전량, 구름 및 적설 효과 (Effects of Ozone, Cloud and Snow on Surface UV Irradiance)

  • 이윤곤;김준;이방용;조희구
    • Ocean and Polar Research
    • /
    • 제26권3호
    • /
    • pp.439-451
    • /
    • 2004
  • Total solar irradiance (750), total UV irradiunce (TUV) and erythemal UV irradiance (EUV) measured at King Sejong station $(62.22^{\circ}S,\;58.78^{\circ}W)$ in west Antarctica have been used together with total ozone, cloud amount and snow cover to examine the effects of ozone, cloud and snow surface on these surface solar inadiunce over the period of 1998-2003. The data of three solar components for each scan were grouped by cloud amount, n in oktas $(0{\leq}n<3,\;3{\leq}n<4,\;4{\leq}n<5,\;5{\leq}n<6,\;6{\leq}n<7\;and\;7{\leq}n<8)$ and plotted against solar zenith angle (SZA) over the range of $45^{\circ}\;to\;75^{\circ}$. The radiation amplification factor (RAE) is used to quantify ozone effect on EUV. RAF of EUV decreases from 1.51 to 0.94 under clear skies but increases from 0.94 to 1.85 under cloudy skies as SZA increases, and decreases from 1.51 to 1.01 as cloud amount increases. The effects of cloud amount and snow surface on EUV are estimated as a function of SZA and cloud amount after normalization of the data to the reference total ozone of 300 DU. In order to analyse the transmission of solar radiation by cloud, regression analyses have been performed for the maximum values of solar irradiance on clear sky conditions $(0{\leq}n<3)$ and the mean values on cloudy conditions, respectively. The maximum regression values for the clear sky cases were taken to represent minimum aerosol conditions fur the site and thus appropriate for use as a normalization (reference) factor for the other regressions. The overall features for the transmission of the three solar components show a relatively high values around SZAs of $55^{\circ}\;and\;60^{\circ}$ under all sky conditions and cloud amounts $4{\leq}n<5$ and $5{\leq}n<6$. The transmission is, in general, the largest in TUV and the smallest in EUV among the three components of the solar irradiance. If the ground is covered with snow on partly cloudy days $(6{\leq}n<7)$, EUV increases by 20 to 26% compared to snow-free surface around SZA $60^{\circ}-65^{\circ}$, due to multiple reflections and scattering between the surface and the clouds. The relative difference between snow surface and snow-free surface slowly increases from 9% to 20% as total ozone increases from 100 DU to 400 DU under partly cloud conditions $(3{\leq}n<6)$ at SZA $60^{\circ}$. The snow effects on TUV and TSO are relatively high with 32% and 34%, respectively, under clear sky conditions, while the effects changes to 36% and 20% for TUV and TSO, respectively, as cloud amount increases.

자체-감지능 및 광투과도를 지닌 CNT 및 ITO/PET 다기능성 나노복합소재의 계면 조절 연구 (Interfacial Control of Multi-functional CNT and ITO/PET Nanocomposites having Self-Sensing and Transparency)

  • 왕작가;권동준;구가영;박종만
    • Composites Research
    • /
    • 제24권1호
    • /
    • pp.45-50
    • /
    • 2011
  • 자체-감지능 있는 다기능성 나노복합소재를 위해, 투명하고 전도성 있는 카본나노튜브 (CNT)로 코팅된 폴리에틸렌 테레프탈레이트(PET)를 함침 방법으로 제조하였다. CNT 코팅의 전기적 광학적 특정의 변화는 함침 횟수와 CNT용액의 농도에 주로 의존하였다. 결과적으로, CNT 코팅의 표면저항과 투과도는 제조공정의 변수들에 따라 예민하게 조절되었다. CNT 코팅의 표면저항은 4점법과 이중 배열법에 의해 측정되었으며, 광학적 투과도는 UV 스펙트럼을 사용하여 평가하였다. CNT 코팅의 표면특성을 측정한 정적 및 동적 접촉각은 상호 일치함을 보여주었다. 함침 코팅수가 증가함에 따라, CNT코팅한 PET의 표면저항은 현저하게 저하했으나, 투명도는 CNT 네트워크의 특성으로 거의 감소하지 않았다. CNT와 인듐틴옥사이드 (ITO)의 계면 및 전기적 특성들은 피로 시험을 통하여 비교하였다. CNT는 2000회 반복 후에도 표면저항의 변화가 없는 반면에, ITO는 1000회 반복까지 표면저항의 급격한 증가를 보여주었다가 안정화하였다. 이는 형상비가 큰 CNT는 전기 접촉점을 계속 유지하는 반면에, 취성이 있는 ITO는 미세 균열이 발생하여 전지 접촉점을 많이 상실하기 때문이다.

석조구조물의 효율적 유지관리를 위한 형상역공학적, 지반공학적 및 구조동역학적 특성연구 - 첨성대를 중심으로 - (Studies on the characteristics of stone structures by shape reversal, geotechnical and dynamic structural engineerings)

  • 손호웅;김성범
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
    • /
    • pp.25-48
    • /
    • 2004
  • 구조물의 시간경과에 따른 변형 및 성능저하 현상은 인위적 요인 및 시간경과에 따른 지반상태의 변화 혹은 지반 변위요인의 누적에 의해 발생한다. 본 연구에서는 경상남도 경주시에 위치한 첨성대를 연구대상으로 설정하였다. 첨성대는 약 1,300여 년 전 건립된 석축구조물로서 지반침하로 약간 기울어져 있으며, 일부 석재 사이의 틈이 벌어져 있는 상태이다. 본질적인 대책수립을 위하여 본 연구에서는 이러한 목적을 위하여 3차원 레이저스캐닝시스템에 의한 (형상)역공학적 연구, 물리탐사에 의한 지반공학적 특성 연구 및 고유진동수 측정에 의한 첨성대의 동적특성 등의 다음과 같은 연구들을 수행하였다. 첫째, 정밀측량에 의한 첨성대의 정밀한 변형량 측정 및 지속적인 변위측정을 위하여 3차원 레이저 스캐닝에 의한 첨성대의 3차원 공간위치정보를 취득하여 형상역공학에 의한 3차원 벡터이미지 형상구현 및 첨성대의 크기, 변위량, 변위방향 등 여러 가지 제원을 구하고자 하였다. 둘째, 다양한 비파괴적 물리탐사 방법들을 적용하여 첨성대 및 주변 지반의 물성분포 및 지반특성을 파악하고자 하였다. 한편, 다양한 물리탐사를 통하여 향후 유사한 조사에 있어서 적절한 물리탐사 방법을 제시하고자 하였다. 셋째, 경주 첨성대의 1/10 모형에 대한 동적특성실험 및 실물에 대한 고유진동수 측정을 통해 첨성대의 구조적 특성을 연구하여 첨성대의 구조특성 및 상태판단 및 동적특성 파악에 의한 내진성능을 판단하고자 하였다.

  • PDF

광 삼각법 측정 알고리즘을 이용한 자동차 도어 간격 측정 및 보정에 관한 연구 (A study on measurement and compensation of automobile door gap using optical triangulation algorithm)

  • 강동성;이정우;고강호;김태민;박규백;박정래;김지훈;최두선;임동욱
    • Design & Manufacturing
    • /
    • 제14권1호
    • /
    • pp.8-14
    • /
    • 2020
  • In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

가진 각도에 따른 야구배트의 공진주파수 분석 (Resonance Frequency Analysis of A Baseball Bat by Impact Angle)

  • 박선향;정우양;정환희;이상준
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권6호
    • /
    • pp.777-783
    • /
    • 2015
  • 이방성 물질인 목재는 방향별로 나타나는 세포종류, 크기, 배열에 따라 경도, 성질, 치수변화등 서로 다른 성질을 나타낸다. 또한 사용용도에 따라 다양한 형태로 이용할 수 있는 재료이다. 그러나 동일수종의 목재 내에서도 변이성이 나타나기 때문에 각각의 고유성질과 용도에 대해 정확히 파악하고 이론 및 기술 등의 정립을 통해 재료 이용의 극대화를 위한 연구가 필요하다. 목재의 물리적 특성 및 밀도와 탄성계수의 관계에 관한 연구는 국내외로 다양하게 이루어져 왔으나 대부분 규격화된 시편으로 얻은 값을 통해 상관관계를 분석해왔으며 목재 완제품에 적용한 연구가 거의 없는 실정이다. 또한 야구배트에 대한 진동거동 및 타격에 관한 논문은 많이 있으나 목재 배트를 재료로서 물성을 분석한 연구가 미비한 실정이므로 이와 관련된 연구가 필요하다. 본 연구에서는 캐나다산 경단풍나무로 제작한 배트의 실제완제품을 이용하여 소재물성을 파악하고 주파수 비교를 통해 탄성계수를 분석하고자 한다. 소재물성 비교를 위해 배트의 연륜분포와 밀도 등 기초물성을 조사하였고 공진주파수와 관계식(ASTM C1259)을 통해 탄성계수를 산출하여 재료의 반발력을 산출하였다. 공진주파수 증가에 따른 연륜분포 비교에서 감소하는 경향을 나타냈다. 섬유방향에 따른 가진 각도별 비교에서 섬유방향과 수직한 $0^{\circ}$ 방향으로 가진할 때보다 수평한 $90^{\circ}$ 방향으로 가진할 때 탄성계수 값이 높게 나타났다.

폐렴간균 폐렴에 의해 유발된 상대정맥 증후군 1예 (A Case of Superior Vena Cava Syndrome Caused by Klebsiella Pneumonia)

  • 김주영;임채만;김선희;추윤호;고윤석;김우성;김원동
    • Tuberculosis and Respiratory Diseases
    • /
    • 제41권1호
    • /
    • pp.58-62
    • /
    • 1994
  • 저자들은 폐렴간균 폐렴에 의한 우상엽의 용적 증가로 인하여 유발된 상대정맥 증후군 1예를 임상 경험한후 medline검색상 SVCS의 유발 원인으로서 폐렴간균 폐렴은 최초의 증례로 사료되므로 이에 보고하는 바이다.

  • PDF

9.4T MRI FLASH Sequence에서 마우스의 뇌 조영증강 검사를 위한 적정 Echo phase (Optimal Echo phase of FLASH sequence for Brain Enhancement scan of mouse at 9.4T MRI system)

  • 정현근;김민기;남기창;정현도;안치권;김호철
    • 전자공학회논문지
    • /
    • 제54권7호
    • /
    • pp.115-124
    • /
    • 2017
  • 본 연구에서는 9.4T MRI의 FLASH 시퀀스를 이용하여 마우스의 뇌 조영증강 검사 시 적정한 echo phase를 알아보고자 하였다. 이에 따른 정량화를 위하여 가도테리돌로 제작된 MR팬텀 실험을 진행하였다, 서로 다른 몰 농도의 가돌리늄으로 구성된 각 세 개의 팬텀을 제작하여 마우스 뇌 검사에 사용하고 있는 FLASH 시퀀스의 echo phase에 변화를 주어 시행한 후, 이에 대한 분석을 진행하였다. 팬텀실험결과 SSI(Saline's Signal Intensity)는 $6{\pi}$부터 $28{\pi}$까지 33개 각각의 phase에서 25~27[a.u]를 보였고, RSP(Response Start Point)는 각각 30~100 mmol을 기록하였다. MPSI(Max Peak Signal Intensity)는 47~52 [a.u]를 보였고, MPP(Max Peak Point)는 0.8~9 mmol로 기록되었다. EPMS(Enhancement Percentage of MSI to SSI)는 80.8~108.0%로 기록되었고, ASIMP(Average of SI according to Mol concentration on each Phase)은 21.1~31.8 [a.u] 사이에서 형성되었다. 마지막으로 ORA(Occurence Rate of Artifact)는 아티팩트 발생유무에 따라 +1과 -1로 표기하였다. 본 연구를 통하여 9.4T MRI에서의 FLASH 시퀀스의 조영증강 정도를 정량화 할 수 있었고, 마우스의 뇌 조영증강 검사 시 적정 echo phase를 산출 할 수 있었다.

비디오속의 얼굴추적 및 PCA기반 얼굴포즈분류와 (2D)2PCA를 이용한 얼굴인식 (Face Tracking and Recognition in Video with PCA-based Pose-Classification and (2D)2PCA recognition algorithm)

  • 김진율;김용석
    • 한국지능시스템학회논문지
    • /
    • 제23권5호
    • /
    • pp.423-430
    • /
    • 2013
  • 통상의 얼굴인식은 사람이 똑바로 카메라를 응시해야 하거나, 혹은 이동하는 통로의 정면과 같이 특정 얼굴포즈를 취득할 수 있는 위치에 카메라를 설치하는 등 통제적인 환경에서 이루어진다. 이러한 제약은 사람에게 불편을 초래하고 얼굴인식의 적용 범위를 제한하는 문제가 있다. 본 논문은 이러한 기존방식의 한계를 극복하기 위하여 대상이 특별한 제약 없이 자유롭게 움직이더라도 동영상 내에서 대상의 얼굴을 추적하고 얼굴인식을 하는 방법을 제안한다. 먼저 동영상 속의 얼굴은 IVT(Incremental Visual Tracking) 추적기를 사용하여 지속적으로 추적이 되며 이때 얼굴의 크기변화와 기울기가 보상이 되어 추출이 된다. 추출된 얼굴영상은 사람과 카메라의 각도를 특정각도로 제한하지 않았으므로 다양한 포즈를 가지게 되며 따라서 얼굴인식을 하기 위해서 포즈에 대한 판정이 선행되어야 한다. 본 논문에서는 PCA(Principal Component Analysis)기반의 얼굴포즈판정방법을 사용하여 추적기에서 추출된 이미지가 5개 포즈별 DB속의 학습된 포즈와 유사한 것으로 판정될 때만 얼굴인식을 수행하여 인식률을 높이는 방법을 제안하였다. 얼굴인식에서는 PCA, 2DPCA, $(2D)^2PCA$의 인식알고리즘을 사용하여 얼굴인식률과 수행시간을 비교 제시하였다.

In Situ Spectroscopy in Condensed Matter Physics

  • Noh, Tae Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.92-92
    • /
    • 2014
  • Recently, many state-of-art spectroscopy techniques are used to unravel the mysteries of condensed matters. And numerous heterostructures have provided a new avenue to search for new emergent phenomena. Especially, near the interface, various forms of symmetry-breaking can appear, which induces many novel phenomena. Although these intriguing phenomena can be emerged at the interface, by using conventional measurement techniques, the experimental investigations have been limited due to the buried nature of interface. One of the ways to overcome this limitation is in situ investigation of the layer-by-layer evolution of the electronic structure with increasing of the thickness. Namely, with very thin layer, we can measure the electronic structure strongly affected by the interface effect, but with thick layer, the bulk property becomes strong. Angle-resolved photoemission spectroscopy (ARPES) is powerful tool to directly obtain electronic structure, and it is very surface sensitive. Thus, the layer-by-layer evolution of the electronic structure in oxide heterostructure can be investigated by using in situ ARPES. LaNiO3 (LNO) heterostructures have recently attracted much attention due to theoretical predictions for many intriguing quantum phenomena. The theories suggest that, by tuning external parameters such as misfit strain and dimensionality in LNO heterostructure, the latent orders, which is absent in bulk, including charge disproportionation, spin-density-wave order and Mott insulator, could be emerged in LNO heterostructure. Here, we performed in situ ARPES studies on LNO films with varying the misfit strain and thickness. (1) By using LaAlO3 (-1.3%), NdGaO3 (+0.3%), and SrTiO3 (+1.7%) substrates, we could obtain LNO films under compressive strain, nearly strain-free, and tensile strain, respectively. As strain state changes from compressive to tensile, the Ni eg bands are rearranged and cross the Fermi level, which induces a change of Fermi surface (FS) topology. Additionally, two different FS superstructures are observed depending on strain states, which are attributed to signatures of latent charge and spin orderings in LNO films. (2) We also deposited LNO ultrathin films under tensile strain with thickness between 1 and 10 unit-cells. We found that the Fermi surface nesting effect becomes strong in two-dimensions and significantly enhances spin-density-wave order. The further details are discussed more in presentation. This work was collaborated with Hyang Keun Yoo, Seung Ill Hyun, Eli Rotenberg, Ji Hoon Shim, Young Jun Chang and Hyeong-Do Kim.

  • PDF