• Journal of Environmental Science International
• /
• v.15 no.10
• /
• pp.967-973
• /
• 2006

In this study used tank model and specific discharge to calculate low-flow of mountain basin and supply data that need in water resources plan. Low-flow is calculated byspecific discharge and area ratio method as resulted that calculate storage of low-flow by tank model was construed that showd all similar aspect. In judged to help in water resources plan establishment calculating low-flow using model to supplement uncertainty of observed data in that calculate of low-flow ungaged mountain area. It shows by economical and realistic plan until 12 years after development that run parallel and use economic performance analysis result valley flow and groundwater. But wide area water services and Chungju dam since 12 years onward was expose that is economic.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.411-431
• /
• 1992

The present study was undertaken to classify and describe the vegetation around andong dam area, kyong-buk, korea$(36^{\circ}\;35^{\prime}\;N, \;128^{\circ}\;47^{\prime}\;E)$ by methods of the ZM school of phytosociology. The investigations were carried out in the plot. The homogeneous part of forest and grass communities was analyzed by recording the combined scale of cover-abundance and sociability of all species found in the plot. The community data obtained were classified into two associations and seven communities; festuco onvinae-pinetum densiflorae assoc. nov., quercetum variabili-serratae, quercus acutissima community, larix leptolepis, populus tomentiglandulosa, acer canadensis, prunus spp. afforestations, robinia pseudo-acacia-commelina communis community and acer palmatum cv. afforestation. The grass vegetation was divided into six associations and seventeen communities; lactuco indicae- humuletum japonicae, eragrostio ferruginei-plantaginetum asiaticae, polygonetum thunbergii, phragmitetum japonicae, eragrostio ferruginei-plantaginetum asiaticae, polygonetum thunbergii, phragmitetum japonicae, artemisio-potentilletum chinesis, eleusinetum indicae, amorpha freticosa, artemisia princeps, achyranthes fauriei and other fourteen communities. amoung the above vegetationship of the vegetation units with their environments was outlined.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.279-284
• /
• 2016

Finite element analysis along with DOE scheme has been performed to obtain robust design of crankshaft assembly. This study focused on obtaining optimized fillet radius of crankshaft mainly by statistical approach. 27 design cases using 3 factors with 3 levels are constructed by design of experiment. Changes of design factors and noise factor may influence the durability of crankshaft system. General two stages of robust design may enhance the durability of crankshaft model. Increasing crank arm thickness was adopted as a shrink step and change of fillet radius was used as a shift step. By combining these two steps, the stress concentration at the fillet area is reduced and adequate fillet radius is determined for the robust design of crankshaft.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.239-242
• /
• 2017

This paper proposes a low-cost method for counting people based on blob detection and blob tracking. Here background subtraction is used to detected blob and then the blob is classified with its width and height to specify that the blob is a person. In this system we first define the area of entry and exit point in the video frame. The counting of people starts when midpoint of the people blob crosses the defined point. Finally, total number of people entry and exit from the place is displayed. Experiment result of this proposed system has high accuracy in real-time performance.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.87-91
• /
• 2009

Over the past several years both licensed and unlicensed services and devices have enjoyed extensive growth in the wireless marketplace. In some urban areas in the Kazakhstan, the penetration rate of licensed cellular and PCS services is more than 60%. Similarly, the use of unlicensed wireless local area network technologies has grown significantly as these systems have been deployed in homes, offices, and 'hot spots' in restaurants, hotels, public meeting areas, etc. As more services are wirelessly enabled and as technologies continue to evolve, the demand for new spectrum for commercial services will also continue to increase. Thus, the appropriate regulatory models for future spectrum allocations will continue to be debated throughout the wireless industry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.28-37
• /
• 2019

Due to their flexible tailoring qualities, composites have become fascinating materials for structural engineers. While the research area of fiber-reinforced composite materials was previously limited to synthetic materials, natural fibers have recently become the primary research focus as the best alternative to artificial fibers. The natural fibers are eco-friendly and relatively cheaper than synthetic fibers. The main concern of current research into natural fiber-reinforced composites is the prediction and enhancement of the effective material properties. In the present work, finite element analysis is used with a numerical homogenization approach to determine the effective material properties of jute fiber-reinforced epoxy composites with various volume fractions of fiber. The finite element analysis results for the jute fiber-reinforced epoxy composite are then compared with several well-known analytical models.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2010

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.2
• /
• pp.7-11
• /
• 2020

When rivers and lakes are contaminated with numerous contaminants, usually the contaminants are finally deposited on the sediments of the waterbody. Many clean up technologies have been developed for the contaminated sediments. Among several technologies dredging is one of the best methods because dredging removes all the contaminated sediments from the water and the contaminated sediments can be completely treated with physical and chemical methods. However the most worried phenomenon is suspension of fine particles during the dredging process. The suspended particle can release contaminants into water and resulted in spread of the contaminants and the increase of risk due to the resuspension of the precipitated contaminants such as heavy metals and toxic organic compounds. Therefore the success of the dredging process depends on the prevention of resuspension of fine particles. Advanced dredging processes employ pumping the sediment with water onto a ship and release the turbid water pumped with sediment into waterbody after collection of sediment solids. Before release of the turbid water into lake or river, just a few minutes allowed to precipitate the suspended particle due to the limited area on a dredging ship. However the fine particle cannot be removed by the gravitational settling over a few minutes. Environmental technology such as coagulation and precipitation could be applied for the settling of fine particles. However, the process needs coagulants and big settling tanks. For the quick settling of the fine particles suspended during dredging process magnetic separation has been tested in current study. Magnetic force increased the settling velocity and the increased settling process can reduce the volume of settling tank usually located in a ship for dredging. The magnetic assisted settling also decreased the heavy metal release through the turbid water by precipitating highly contaminated particles with magnetic force.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.131-147
• /
• 2005

This study was carried out to clarify the distribution of vascular plants and their usefulness in Irwolsan of Gyeongbuk $(1218.5m,\;36^{\circ}\;45'\;00'\~36^{\circ}\;50'\;10'\;N,129^{\circ}\;02'\;50'\~129^{\circ}\;09'\;00'E)$. The vascular plants collected 16 times (from May, 2002, to May, 2003) were consisted of total 740 taxa; 105 families, 381 genera, 618 species, 6 subspecies, 104 varieties and 12 forms. Among them, edible, medicinal, industrial, ornamental and unknown of usefulness plants were 315 taxa, 428 taxa, 100 taxa, 84 taxa, 201 taxa, respectively. Korean endemic plants of this area were 22 taxa, and Law-protected plants by Ministry of Environment were 6 taxa. The naturalized plants were 27 taxa, therefore naturalized ratio was $3.6\%$, and Urban index $9.7\%$.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.2
• /
• pp.1-5
• /
• 2018

Arsenic (As) is one of the elements having most harmful impact on the human health. Arsenic is a known carcinogen and arsenic contamination of drinking water is affecting on humans in many regions of the world. Adsorption has been proved most preferable technique for the removal of arsenic. Many researchers have studied various types of solid materials as arsenic adsorbent, and iron oxide and its modified forms are considered as the most effective adsorbent in terms of adsorption capacity, recovery, and economics. However, most of all iron oxides have small surface area in comparing with common adsorbents in environmental application such as activated carbon but the activated carbon has weak sorption affinity for arsenic. We have used an activated carbon as base adsorbent and iron oxide coating on the activated carbon as high affinity sorption sites and giving magnetic attraction ability. In this study, adsorption properties of arsenic and magnetic separation efficiency of the magnetized activated carbon (MAC) were evaluated with variable iron oxide content. As the iron oxide content of the MAC increased, adsorption capacity has also gradually increased up to a point where clogging by iron oxide in the pore of activated carbon compensate the increased sorption capacity. The increase of iron oxide content of the MAC also affected magnetic properties, which resulted in greater magnetic separation efficiency. Current results show that magnetically modified common adsorbent can be an efficiency improved adsorbent and a feasible environmental process if it is combined with the magnetic separation.