• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.240-248
• /
• 2009

Modem version of supersonic jet fighter aircraft must have been guaranteed appropriate controllability and stability in HAoA(High Angle of Attack). The HAoA flight control law have two parts, one is control law of departure prevention and the other is control law of departure recovery support. The control laws of departure prevention for advanced jet trainer consist of HAoA limiter, roll command limiter and rudder fader. The control laws of departure recovery support are consist of yaw-rate limiter and MPO(Manual Pitch Override) mode. The guideline of pitch rocking using MPO mode is simple, but operating skill of pitch rocking is very difficult by the pilot with inexperience of departure situation. Therefore, automatic deep stall recovery system is necessary. The system called the "Automatic Pitch Rocker System" or APRS, provided a pilot initiated automatic maneuver capable of an aircraft recoveries in situations of deep stall, speed and altitude. This paper addresses the design and validation for APRS to recovery of an deep stall without manual pitch rocking by the pilot. Also, this system is designed to recovery of speed, attitude and altitude after deep stall recovery using ATCS (Automatic Thrust Control System) and autopilot. Finally, this system is verified by real-time pilot evaluation using HQS (Handling Quality Simulator).

• Korean Journal of Ophthalmology
• /
• v.32 no.6
• /
• pp.488-496
• /
• 2018

Purpose: This study aimed to analyze the factors influencing visual field recovery after transsphenoidal approach-tumor resection (TSA-TR) in pituitary adenoma patients with visual field defects (VFDs). Methods: We retrospectively evaluated 102 eyes of 102 patients with VFDs induced by pituitary adenomas who underwent TSA-TR between January 2010 and December 2015. All patients had been observed for more than one year. The severity of the VFD in each patient was evaluated using the mean deviation (MD) and pattern standard deviation in the most-affected eye. Clinical and demographic data such as preoperative visual acuity and visual field, age, sex, tumor volume, neurological symptoms at diagnosis, duration of symptoms, patterns of the preoperative VFD, and preoperative central VFD were investigated and analyzed for association with recovery of the visual field. Results: Recovery from VFDs occurred in 71 (69.6%) eyes after a mean period of $18.36{\pm}5.21$ months. The recovery group was younger (p = 0.003), had higher preoperative MD values (p = 0.016), and had better preoperative visual acuity (p = 0.03), compared with the non-recovery group. Preoperative central VFD (p = 0.006) and preoperative bilateral VFD (p = 0.016) were significantly less frequent in the recovery group. Multivariate logistic regression revealed that age at diagnosis (odds ratio [OR], 0.962; p = 0.022), preoperative MD (OR, 1.069; p = 0.046), preoperative central VFD (OR, 0.212; p = 0.039), and preoperative bilateral VFD (OR, 0.212; p = 0.035) were associated with visual field recovery after TSA-TR. Conclusions: Younger age, higher preoperative MD, and the preoperative abscence of central VFD or bilateral VFD were favorable factors influencing visual field recovery after TSA-TR in patients with pituitary adenomas. An understanding of the associated clinical factors may help predict visual outcomes after TSA-TR in pituitary adenoma patients with VFDs.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.131-143
• /
• 2018

Phosphorus (P) is a limited, essential, and irreplaceable nutrient for the biological activity of all the living organisms. Sewage sludge ash (SSA) is one of the most important secondary P resources due to its high P content. The SSA has been intensively investigated to recover P by wet chemicals (acid or alkali). Even though $H_2SO_4$ was mainly used to extract P because of its low cost and accessibility, the formation of $CaSO_4$ (gypsum) hinders its use. Heavy metals in the SSA also cause a significant problem in P recovery since fertilizer needs to meet government standards for human health. Therefore, P recovery process with selective heavy metal removal needs to be developed. In this paper some of the most advanced P recovery processes have been introduced and discussed their technical characteristics. The results showed that further research is needed to identify the chemical mechanisms of P transformation in the recovery process and to increase P recovery efficiency and the yields.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.109-119
• /
• 2021

Self-recovery is a tamper-detection and image recovery methods based on data hiding. It generates two types of data and embeds them into the original image: authentication data for tamper detection and reference data for image recovery. In this paper, a region-based scalable self-recovery (RSS) method is proposed for salient-object images. As the images consist of two main regions, the region of interest (ROI) and the region of non-interest (RONI), the proposed method is aimed at achieving higher reconstruction quality for the ROI. Moreover, tamper tolerability is improved by using scalable recovery. In the RSS method, separate reference data are generated for the ROI and RONI. Initially, two compressed bitstreams at different rates are generated using the embedded zero-block coding source encoder. Subsequently, each bitstream is divided into several parts, which are protected through various redundancy rates, using the Reed-Solomon channel encoder. The proposed method is tested on 10 000 salient-object images from the MSRA database. The results show that the RSS method, compared to related methods, improves reconstruction quality and tamper tolerability by approximately 30% and 15%, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.515-523
• /
• 2003

Shape memory is physical phenomenon which a platically metal is restored to its original shape by a solid state phase change by heating. TiNi alloy the most effective material in the shape memory alloy(SMA). To study(measure) recovery stress of intelligent composite. Ti50-Ni50 shape memory matrix with prestrain SMA fiber. When SMA fiber of the intelligent composite is heated over austenite starting temperature(As) by electric heating. a recovery stress are generated. The recovery stress of the intelligent composite was measured by strain gage or photoelastic experiment. Measuring method of recovery stress by photoelastic experiment was developed in this research. It was certified that photoelastic experiment was more effective and more precise than strain gage method in the measurement of recovery stress.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.272-278
• /
• 1998

Cell recovery from high cell density broths of Alcaligenes eutrophus by pretreatment with aluminum-based coagulants such as aluminum sulfate, polyaluminum hydrooxide chloride silicate (PACS), and polyaluminum hydrooxide chloride (Hi-PAX) was carried out. Cells coagulated with coagulants could be successfully recovered above 95-99% by centrifugation or filtration. The optimum initial pH of fermentation broths for cell recovery was in the range of 10 to 12. Optimum coagulants dosage for cell recovery increased with increasing of cell concentrations (21-160 g/L). The optimum coagulant dosages to recover cells with more than 95% cell recovery by centrifugation for the cell concentrations ranged 21-160 g/L were as follows: aluminum sulfate, 416-1708 mg Al/L; PACS, 211-826 mg Al/L; Hi-PAX, 320-960 mg Al/L. At optimum conditions for the coagulation of cells, centrifugal forces for 95% of cell recovery were dependent on the cell concentration. The centrifugal forces at 82 g/L and 160 g/L of cell concentration were only 45${\times}$g and 1600${\times}$g, respectively.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1442-1447
• /
• 2004

A significant amount of labor hour is being spent for clean up spent abrasives after blasting. So, for improving the efficiency of abrasive(grit) recovery process which acts as the neck of a battle in preceding coating stage, it was established the theoretical background for pneumatic transport technology in the abrasive recovery system as well as experimentally evaluated the effect of design parameters such as flow pattern, saltation velocity and pressure drop on the efficiency of the abrasive recovery system. And, by optimizing the operating parameter such as the length and diameter of suction hose, specification of recovery device, recovery mouth and hose connection method, a method which can dramatical1y increase the efficiency of abrasive recovery system, is derived.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.83-101
• /
• 2011

Since most of companies these days are utilizing the Information system actively, Information System is the most important factor which should be recovered in terms of Business Continuity. However, a lot of enterprises have been outsourcing their Disaster Recovery Center. Therefore, it is highly possible that the information system can not work well and result in the discontinuity of business when any trouble arises because of seperated plan of Business Continuity and Disaster Recovery. The study draws critical success factors for successful disaster recovery through researches of 42 documents. Then, factors are reviewed through interviews with consultants, experts of Business Continuity Plan and the information system officers of domestic banks. Domestic companies can make use of the study when they develop or renew Disaster Recovery Plan or Information System in terms of Business continuity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.3
• /
• pp.240-246
• /
• 2012

The supply and use of exhaust heat recovery ventilation system as effective energy saving equipment has been increasing steadily. The exhaust heat recovery ventilation system can be installed at ceiling of balcony or emergency space. However, ventilation system can not be installed at emergency space because where have to remain as empty space by law. Therefore, the proper installation space of ventilation system is needed. In this study, to install heat recovery ventilation system in the light weight wall, thickness of heat exchanger was assembled below 140 mm. One or two paper heat exchangers were installed in the ventilation system. The efficiency of heat recovery was analyzed through performance experiment on case of cooling and heating mode.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.156-161
• /
• 2012

Difference in recovery behaviors from the circular deformation of natural rubber (NR) composites aged in air and distilled water, respectively were investigated. Recoveries of the samples aged in air were larger than those of the samples aged in distilled water. Recovery rates of the samples reinforced with filler were faster than those of the unreinforced ones. Recovery rates of the carbon black-filled samples were faster than those of the silica-filled ones. Difference in the recovery behaviors according to the aging media can be explained by the crosslinking density changes and the annealing effect.