• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.27-31
• /
• 2010

Purpose of study: The purpose of this study was to provide adequate diagnostic guideline for the maxillary sinuses prior to dental implant treatment for edentulous posterior maxillary areas. For this purpose, our procedure involves the estimation of the remaining alveolar bone height, the examination of the anatomical variation in the maxillary sinuses (e.g. sinus septum), and the evaluation of the incidence of preoperative pathological conditions in the maxillary sinuses. Materials and Methods: We selected 189 patients to undergo computerized tomography (CT) in order to account for the posterior maxillary anatomy found in patients of Korean ethnicity. We evaluated the following using Dentascan software: Remaining alveolar bone height, incidence of sinus septum, and rate of preoperative pathologic conditions in the maxillary sinus. The average amount of remaining alveolar bone height was analyzed using the student's t-test for differences according to anatomical site, and the ANOVA was used for the differences according to age group with the level of significance set at 0.05. Results: Alveolar bone heights of upper first premolar, second premolar, first molar, and second molar was 12.24 mm, 10.37 mm, 7.16 mm, and 7.15 mm, respectively with statistical significance (P < 0.05). Incidence of sinus septum as an anatomic variation was 17 out of 189 cases (9.0%). Incidence of mucosal thickening as a pathologic variation was 82 out of 189 cases (43.4%). Conclusion: In treatment planning of posterior maxillary edentulous area of Koreans, the consideration of augmentation surgery for maxillary sinus is required in maxillary molar area before dental implant installation, and preoperative screening of the asymptomatic maxillary sinuses can be regarded as a reasonable preoperative procedure in the planning of dental implant treatment on the posterior maxillary edentulous area.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.413-420
• /
• 2015

The skin is one of the largest organs in our body and participates in many of the human organism's physiological and pathological events. Skin function were known for self-maintenance and self-repair, mechanical and chemical stress protection, protection against UV and environmental pathogenic micro-organisms, production of vitamin D, and social and psychological function through the physical aspect. The aim of this study was to evaluate the variation of biophysical parameters and to find relation with skin biomarkers in different anatomical site and age in Korean women. About 70 healthy volunteers in age range 20 to 49 were participated in this test. Test areas were the forearms and the cheek. Investigation to determine biophysical parameters on human skin, was carried out using various non-invasive methods. For analysis to skin biomarkers, we studied to examine various biomarkers for the quantitative determination of cortisol, fibronectin, keratin-1, 10, and 11, involucrin, and keratin-6 in human face and forearm. And we measured to skin biophysical parameters for skin anatomical site and age difference with non-invasive methods. As results of measuring site, some parameters were have following significant difference, stratum corneum hydration, trans epidermal water loss and skin color (L and a value). As results of age difference, skin colors were had only significant difference with age. For cortisol, keratin-6, fibronectin, keratin-1, 10, 11 contents, there were no significant difference in age and site. However, involucrin level in the cheeks were the highest for age group 30 ~ 39 compared to other age groups. These results suggest that in individual skin condition may explain detailed skin state variation.

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.167-170
• /
• 2018

Axillary arch is relatively common variation of muscle in the axilla. There were several attentions on axillary arch due to its anatomical and surgical importance. During educational dissection, a variant muscle was found in right arm of 68-year-old female cadaver. The variation of muscle originated from the lateral edge of the latissimus dorsi muscle as muscular form. And then, it crossed the axillary artery and median nerve as tendinous form. Finally it became wide as muscular form and inserted into the pectoralis major. We reported this variant muscle and discussed its clinical significances.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.3
• /
• pp.219-220
• /
• 2015

Variations in the course and distribution of common palmar digital nerves and arteries are rare. A classic common palmar digital nerves and arteries are defined as concomitant. During routine dissection classes to undergraduate medical students we observed formation of each common palmar digital nerve divided into 2 or 3 branches and formed a ring enclosing the corresponding common palmar digital artery. Knowledge of the anatomical variations of the common palmar digital nerves and arteries is crucial for safe and successful hand surgery.

• Applied Microscopy
• /
• v.42 no.4
• /
• pp.194-199
• /
• 2012

The anatomy and morphology of seeds from 10 Hawaiian Portulaca taxa were examined to explore patterns of variation among the taxa, and to evaluate their phylogenetic relationships. Features of seeds were assessed employing microtechnique procedures, statistical analysis, and scanning electron microscopy (SEM). Anatomically, the orientation of embryo was consistent across taxa, and all seeds examined had central nutritive tissue and integuments comprising the peripheral embryo. Seeds were generally small, circular to ovoid in shape, and either smooth or rough-surfaced, with tubercules. Variation in seed size was noted, although minimal within small seeded group. The size of seeds ranged from 0.50~1.26 mm in length, and 0.55~1.34 mm in width, with similar weights. Seeds were distinguished by the sculpture and arrangement of the testa epidermis and the way in which their stellulate-tessellate cells uniquely fit together. Using a multiple range test (ANOVA), two groups were established by seed characteristics. The SEM also demonstrated morphological differences in testa sculpturing. The results obtained confirm the usefulness of seed characteristics in the identification of the species examined, and furthermore, allow for the separation of the Hawaiian Portulaca into two groups.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.309-312
• /
• 2013

A retromolar canal is an anatomical variation in the mandible. As it includes the neurovascular bundle, local anesthetic insufficiency can occur, and an injury of the retromolar canal during dental surgery in the mandible may result in excessive bleeding, paresthesia, and traumatic neuroma. Using imaging analysis software, we evaluated the cone-beam computed tomography (CT) images of two Korean patients who presented with retromolar canals. Retromolar canals were detectable on the sagittal and cross-sectional images of cone-beam CT, but not on the panoramic radiographs of the patients. Therefore, the clinician should pay particular attention to the identification of retromolar canals by preoperative radiographic examination, and additional cone beam CT scanning would be recommended.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.2
• /
• pp.112-119
• /
• 2010

The anterolateral thigh flap is a reliable and versatile flap. It has been extensively used for soft tissue reconstruction because minimal donor site morbidity is attractive feature of this flap. It can be harvested as a cutaneous, fasciocutaneous, muscluocutaneous flap. We can be used to form as desired shape and thickness. But variation of vascular anatomy make difficult for many surgeons. We review of vascular anatomy of the anterolateral thigh to be easier access to surgery. With understanding anatomic variation, it allows you to take advantage of this surgery using little more variable form.

• Archives of Plastic Surgery
• /
• v.49 no.2
• /
• pp.253-257
• /
• 2022

The free fibula flap (FFF) is based on the peroneal artery (PA) system, and it is well known that several anatomical variations of the lower limb vascular system exist, including peronea arteria magna (PAM). PAM is a rare congenital variation in which both anterior tibial artery and posterior tibial artery are either aplastic or hypoplastic, and as a result, PA will be the dominant blood supply to the foot. This variation was described as type III-C in Kim-Lippert's Classification of the Infra-Popliteal Arterial Branching Variations. The awareness of its existence is crucial as it often precludes FFF from being harvested due to the risk of significant limb ischemia and limb loss. Despite some literature reporting donor site complications and impending limb loss following FFF harvest in PAM, preoperative vascular mapping before FFF transfer remains controversial among the microsurgeons. We present a case with an incidental intraoperative finding of PAM that had a successful FFF harvest by luck, without preoperative vascular mapping.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1139-1145
• /
• 2014

Creation of a human skeleton model and characterization of the variation in the bone shape are fundamentally important in many applications of biomechanics. In this paper, we present a parametric shape modeling method for femurs that is based on extracting the main parameter of variations of the femur shape from a 3D model database by using statistical shape analysis. For this shape analysis, principal component analysis (PCA) is used. Application of the PCA to 3D data requires bringing all the models in correspondence to each other. For this reason, anatomical landmarks are used for guiding the deformation of the template model to fit the 3D model data. After subsequent application of PCA to a set of femur models, we calculate the correlation between the dominant components of shape variability for a target population and the anatomical parameters of the femur shape. Finally, we provide tools for visualizing and creating the femur shape using the main parameter of femur shape variation.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.444-450
• /
• 2014

PURPOSE. To compare the accuracy of marginal and internal adaptation of zirconia (Zr) copings fabricated on anatomic (A), semi-anatomic (SA) and non-anatomic (NA) occlusal surface preparations. MATERIALS AND METHODS. 45 extracted bicuspid teeth were prepared for receiving zirconia crowns, with different occlusal preparation designs A=15, SA=15 & NA=15. The Zr copings were fabricated by using CAD4DENT, CAD/CAM. The copings were adjusted, cemented and were cross sectioned centrally from buccal cusp tip to lingual cusp tip into mesial and distal halves. The copings were examined under electron microscope at ${\times}200$ magnification and the measurements were recorded at 9 predetermined areas in micrometers. RESULTS. Overall mean gap values for the three groups was found to be $155.93{\pm}33.98{\mu}m$ with Anatomical Occlusal preparation design having the least gap value of $139.23{\pm}30.85{\mu}m$ showing the best adaptation among the groups. Post Hoc Tukey's test showed a statistically significant difference (P=.007) between the means of gap for A & NA preparation designs. Measurements recorded at 9 predetermined points showed variations for the three groups. CONCLUSION. Anatomical occlusal preparation designs resulted in better marginal and internal adaptation of Zr copings. There is a considerable variation between the measured marginal and internal gap values for the Zr copings fabricated by the (CAD4DENT-CAD/CAM). This variation may be associated with the lack of standardization of the preparation of teeth, computerized designing of the coping for each tooth, cement used, uniform pressure application during the cementation of the copings, sectioning of the copings and the microscopic measurements.