• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.1-13
• /
• 2012

In this paper the dynamic behavior of a viscoelastic Timoshenko beam subjected to a concentrated moving load are studied analytically and numerically. The viscoelastic properties of the beam obey the linear standard model in shear and incompressible in bulk. The governing equation for Timoshenko beam theory is obtained in viscoelastic form using the correspondence principle. The analytical solution is based on the Fourier series and the numerical solution is performed with finite element method. The effects of the material properties and the load velocity are investigated on the responses by numerical and analytical methods. In addition, the results are compared with the Euler beam results.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.211-223
• /
• 2012

This paper deals with large deformation post-buckling of a linear-elastic and hygrothermal beam with axially nonmovable pinned-pinned ends and subjected to a significant increase in swelling by an alternative method. Analytical approximate solutions for the geometrically nonlinear problem are presented. The solution for the limiting case of a string is also obtained. By coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials, the governing differential equation with sinusoidal nonlinearity can be reduced to form a cubic-nonlinear equation, and supplementary condition with cosinoidal nonlinearity can also be simplified to be a polynomial integral equation. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. Two approximate formulae for load along axis, potential strain for free hygrothermal expansion and periodic solution are established for small as well as large angle of rotation at the end of the beam. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• Bulletin of the Korean Chemical Society
• /
• 제14권6호
• /
• pp.696-700
• /
• 1993

Gold bonding wire of 0.076 mm in diameter used in semiconductor industry, is dissoved in aqua regia. The solution is then evaporated to near dryness several times with a few drops of HCl added to prepare the final sample solution in 5% HCl. The gold matrix is separated from trace impurities by controlled potential deposition. The whole electrolysis has been carried out inside a clean bench. An optimum potential is found to be +0.25 V to give more than 99.9% Au matrix removal with better than 90 analytes remaining in the electrolyte solution. Isotope dilution calibration is employed to get the best accuracy and precision. Analytical results are presented with determination limits of the analytical method.

• Structural Engineering and Mechanics
• /
• 제19권4호
• /
• pp.413-423
• /
• 2005

This paper presents the solution of large static deflection due to uniformly distributed self weight and the critical or maximum applied uniform loading that a simply supported beam with variable-arc-length can resist. Two analytical approaches are presented and validated experimentally. The first approach is a finite-element discretization of the span length based on the variational formulation, which gives the solution of large static sag deflections for the stable equilibrium case. The second approach is the shooting method based on an elastica theory formulation. This method gives the results of the stable and unstable equilibrium configurations, and the critical uniform loading. Experimental studies were conducted to complement the analytical results for the stable equilibrium case. The measured large static configurations are found to be in good agreement with the two analytical approaches, and the critical uniform self weight obtained experimentally also shows good correlation with the shooting method.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.921-932
• /
• 2016

This paper presents a theoretical analysis for determining the transverse deflection of simply supported battened beams subjected to a uniformly distributed transverse quasi-static load. The analysis considers not only the shear effect but also the discrete effect of battens on the transverse deflection of the battened beam. The analytical solution is obtained using the principle of minimum potential energy. Numerical validation of the present analytical solution is accomplished using finite element methods. The present analytical solution shows that the shear effect on the transverse deflection of battened beams increases with the cross-section area of the main member but decreases with the cross-section area of the batten. The longer the battened beam is, or the larger the moment of inertia of the main member is, the smaller the shear effect will be.

• 한국지반공학회논문집
• /
• 제27권10호
• /
• pp.105-116
• /
• 2011

지금까지 순간 변위시험 (slug test)를 이용해 연직차수벽의 현장투수계수를 평가할 수 있는 이론해는 제시된 바가 없다. 최근 부분 관입된 우물(well)형상에 적용 가능한 이론해에 관한 연구가 발표되었으나, 이는 무한 경계조건인 대수층에만 국한되고 좁은 벽체형상의 연직차수벽의 경계 조건에는 그대로 적용될 수 없다. 이러한 연직차수벽 경계조건을 고려하기 위해, 본 연구에서는 가상 우물법(method of imaginary well)을 도입하여 기존 이론해를 수정하였다. 연직차수벽의 경계조건은 기존 문헌에서 제시한 두 가지 조건을 적용하였다. 첫 번째 경계조건은 연직차수벽 경계에 일정 수두 조건을 적용하고, 두 번째는 경계면에 불투수 경계조건을 적용하였다. 본 논문에서는 연직차수벽의 현장투수계수를 평가할 수 있도록 각 경계조건에 대하여 정상 상태 조건에 대한 일반적인 형상계수를 제시하였다. 첫 번째 경계조건의 경우, 연직차수벽의 투수계수가 연직차수벽이 존재하지 않는 대수층 조건보다 크게 평가되었으며, 두 번째 방법의 경우는 더 작게 평가되었다. 본 연구에서 제시한 수정 이본해를 통해 얻어진 투수계수는 경험식을 바탕으로 무한 대수층에 적용하기 위해 제안된 Bouwer and Rice 방법을 보정하여 다양한 연직차수벽 경계조건에 대해 실제 현장투수계수가 Bouwer and Rice 방법에 의한 결과 보다 1.2~1.7배 큼을 확인하였다. 또한, 연직차수벽 뒷채움재의 압축성을 고려한 기존 해석결과와 비교로부터, 본 논문에서 제시한 이론해는 뒷채움재가 비압축성에 상응하는 값을 제시하는 것을 확인할 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제27권3호
• /
• pp.159-167
• /
• 2015

본 연구에서는 잔류간극수압의 추정에 관한 기존의 해석해에서 지적된 오류를 수정한 새로운 해석해를 제시한다. Fourier급수전개법과 변수분리법으로 산정된 해석해의 타당성은 기존의 해석해, 수치해석해 및 실험결과와 비교 검토로부터 검증된다. 무한 (깊은)두께의 본 해석해는 기존의 해석해보다는 수치적분 등이 수행될 필요가 없는 보다 간단한 식이다. 유한두께에 관한 해석해에 지반두께를 매우 작게 한 경우 극한의 얕은 두께로 점근적인 접근은 가능하지만, 지반두께를 매우 크게 한 경우 극한의 무한두께로 접근은 불가능하며, 유한두께와 무한두께의 사이에는 불연속적인 영역이 존재한다.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.362-368
• /
• 1992

This paper presents a coupling scheme, which couples an analytical solution and the standard finite element, for analyzing the electromagnetic fields. The former is a solution of the magnetic field in free space, i.e., the outer region of boundary, and the latter represents the system with source currents and magnetic materials in the inner region of boundary. The proposed method retains the sparsity and symmetry of the final system matrix, the merits of the standard FEM. To verify the usefulness of the proposed algorithm, an example which can be solved analytically is chosen and analyzed. The results are compared with those of the standard FEM and the analytic solutions.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.55-70
• /
• 2013

A composite breakwater with an upper horizontal porous plate and a lower rubble mound is proposed and studied in this work. By means of matched eigenfunction expansions, a semi-analytical solution is developed for analyzing the hydrodynamic performance of the breakwater. The semi-analytical solution is verified by known solutions for special cases and an independently developed multi-domain boundary element method solution. Numerical examples are given to examine the reflection, transmission and energy loss coefficients of the breakwater and the wave force acting on the horizontal porous plate. Some useful results are presented for engineering applications.