• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.38-47
• /
• 2020

RC 고층건물에서 발생하는 기둥축소의 예측 오차를 최소화하기 위하여 계측결과를 이용한 해석보정에 대한 변수연구가 수행되었다. 해석보정의 변수는 해석보정 시행기준, 해석보정 값, 계측 위치이며, 변수에 따른 해석보정 모델을 41층 규모의 RC 건물의 시공단계해석에서 적용하여 변수에 따른 보정 효과를 비교·분석하였다. 보정 횟수와 전체 보정량에 따른 층별 오차 값의 감소율을 비교하였으며, 해석보정의 시행기준은 일정한 간격을 기준으로 해석보정 할 경우, 해석보정 값은 오차 값만큼 보정할 경우, 계측 위치는 매 층 계측이 될 경우에 오차가 최소화되는 경향을 확인하였다. 이로부터 실제 해석 모델에 대하여 여러 해석보정 모델을 적용함으로써 가장 적합한 해석보정 모델을 도출할 수 있음을 확인하였다.

• Coupled systems mechanics
• /
• 제1권2호
• /
• pp.155-163
• /
• 2012

This paper presents analytical approximate solutions for the initial post-buckling deformation of the pipes in oil and gas wells. The governing differential equation with sinusoidal nonlinearity can be reduced to form a third-order-polynomial nonlinear equation, by coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. The linearization is performed prior to proceeding with harmonic balancing thus resulting in a set of linear algebraic equations instead of one of non-linear algebraic equations, unlike the classical method of harmonic balance. We are hence able to establish analytical approximate solutions. The approximate formulae for load along axis, and periodic solution are established for derivative of the helix angle at the end of the pipe. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.84-89
• /
• 2014

This paper presents an analytical prediction and experimental verification of the electromagnetic performance of a parallel magnetized surface-mounted permanent magnet (SPM) motor having a fractional number of slots per pole combination. On the basis of a two-dimensional (2-D) polar coordinate system and a magnetic vector potential, analytical solutions for flux density produced by the permanent magnets (PMs) and stator windings are derived. Then, analytical solutions for back-electromotive force (emf) and electromagnetic torque are derived from these field solutions. The analytical results are thoroughly validated with 2-D nonlinear finite element (FE) analysis results. Finally, the experimental back-emf and electromagnetic torque measurements are presented to test the validity of the analysis.

• Mass Spectrometry Letters
• /
• 제8권4호
• /
• pp.69-78
• /
• 2017

Glycosylation, which is one of the most common post-translation modification (PTMs) of proteins, plays a variety of crucial roles in many cellular events and biotherapeutics. Recent advances have led to the development of various analytical methods employing a mass spectrometry for glycomic and glycoproteomic study. However, site-specific glycosylation analysis is still a relatively new area with high potential for technologies and method development. This review will cover current MS-based workflows and technologies for site-specific mapping of glycosylation ranging from glycopeptide preparation to MS analysis. Bioinformatic tools for comprehensive analysis of glycoprotein with high-throughput manner will be also included.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.315-320
• /
• 2007

An analytical solution has been developed for the impact response of delaminated composite plates. The analysis is based on an expansion of loads, displacements, and rotations in a Fourier series which satisfies the end boundary conditions of simply-supported. The analytical formulation adopts the Laplace transformation technique, requiring a linearization of contact deformation. In this paper, the nonlinear contact stiffness is replaced by a linearized stiffness, to provide an estimate of the additional compliance due to contact area deformation effects. It has been shown that defects such as delaminations may be modeled as spring stiffness. The change in the impact characteristics as this spring stiffness has been investigated theoretically. Predicted impact responses using analytical solution are compared with the numerical ones from the 3-D non-linear finite element model. From the results, it is shown that analytical solution was found to be reliable for predicting the impact response.

• Water Engineering Research
• /
• 제2권3호
• /
• pp.187-196
• /
• 2001

An approximate analytical solution of a nonlinear hydro-thermo coupled diffusion equation is derived using the dimensionless form of the equation and transformation method. To derive an analytical solution, it is drastically assumed that the product of first order derivatives in the non-dimensionalized governing equation has little influence on the solution of heat and moisture behavior problem. The validity of this drastic assumption is demonstrated. Some numerical simulation is performed to investigate the applicability of a derived approximate analytical solution. The results show a good agreement between analytical and numerical solutions. The proposed solution may provide a useful tool in the verification process of the numerical models. Also, the solution can be used for the analysis of one-dimensional coupled heat and moisture movements in unsaturated porous media.

• Computers and Concrete
• /
• 제4권6호
• /
• pp.457-475
• /
• 2007

A simple analytical procedure to analyze reinforced concrete (RC) beams with cracked section is proposed on the basis of the simplified moment-curvature relations of RC sections. Unlike previous analytical models which result in overestimation of stiffness and underestimation of structural deformations induced from assuming perfect-bond condition between steel and concrete, the proposed analytical procedure considers fixed-end rotation caused by anchorage. Furthermore, the proposed analytical procedure, compared with previous numerical models, promotes effectiveness of analysis by reflecting several factors which can influence nonlinearity of RC structure into the simplified moment-curvature relation. Finally, correlation studies between analytical and experimental results are conducted to establish the applicability of the proposed analytical procedure to the nonlinear analysis of RC structures.

• 한국자기공명학회논문지
• /
• 제4권2호
• /
• pp.125-132
• /
• 2000

The detailed $^1$H and $^{13}$ C NMR assignments of a novel sucrose isovaleryl ester isolated from the seed of Euphorbia Lathyris L., were achieved by one-and two-dimensional techniques. The new sucrose ester was characterized as an $\alpha$-D-glucopyranoside, 3,4,6-tris-O-(3-methyl-1-oxobutyl)-$\beta$-D-fructofuranosyl, 2,6-bis(3-methylbutanoate); sucrose 4,7,8,11,12-pentaisovalerate by MS and NMR experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.163-168
• /
• 2003

Analytical approach is applied to predict temperature of satellite box under worst hot condition from fairing jettison to separation. The box is tried to solve analytically which is exposed to known environmental heating condition and has internal heating and irradiation to space. For a single thermal mass, governing equation for temperature is simplified to 1st order ordinary differential equation(ODE) by several assumptions. Two cases are considered. The one is for constant mass box and the other is for mass-varying box. Each case has three different analytical solution by sign of constant term in ODE. One analytical solution for constant mass is applied to physical launch stage condition. It is concluded that the present analytical method can be used to quick predict the temperature of a satellite box and check whether a satellite is safe against space environment during launch stage.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.926-931
• /
• 2014

This paper presents the torque calculation and parametric analysis of synchronous permanent magnet couplings (SPMCs). Based on a magnetic vector potential, we obtained the analytical magnetic field solutions produced by permanent magnets (PMs). Then, the analytical solutions for a magnetic torque were obtained. All analytical results were extensively validated with the non-linear a two-dimensional (2D) finite element analysis (FEA). In particular, test results such as torque measurements are presented that confirm the analysis. Finally, using the derived analytical magnetic torque solutions, we carried out a parametric analysis to determine the influence of the design parameters on the SPMC's behavior.