• 지능정보연구
• /
• 제19권2호
• /
• pp.177-189
• /
• 2013

스마트교육에서 디지털교과서의 역할은 학습자와 대면하는 교육미디어로써 그 중요성은 재론의 여지없다. 이러한 디지털교과서는 학습자의 편의와 더불어 교수자, 콘텐츠 제작자, 유통업자를 위하여 표준화되어야 활성화되고 산업화될 수 있다. 본 연구에서는 다음과 같은 3가지 목표를 지향하는 디지털교과서 표준화 방안을 모색한다. (1) 디지털교과서는 온-오프 수업을 모두 지원하는 혼합학습 매체의 역할을 해야 하며, 특별한 전용뷰어 없이 표준을 준수하는 모든 EPUB 뷰어에서 실행가능 해야 하며, 기존의 이러닝 학습 콘텐츠와 학습관리시스템를 활용할 수 있도록 하며, 디지털 교과서를 사용하는 학습자의 정보를 추적 관리할 수 있는 트랙킹기능이 있으면서도, 오프라인 동안의 정보를 축적하여 서버와 통신할 수 있는 기능도 필요하다. 디지털교과서의 표준으로서 EPUB을 고려하는 이유는 디지털교과서가 책의 형태를 가져야 하는데 이를 위해서 따로 표준을 정할 필요가 없으며, EPUB 표준을 채택함으로써 풍부한 콘텐츠, 유통구조, 산업기반을 활용할 수 있기 때문이다. (2) 디지털교과서는 오픈소스를 적극 활용하여 저비용으로 현재 사용가능한 서비스를 구성하여 표준과 더불어 실제 실행 가능한 프로그램으로 제시되어야 하며, 관련 학습 콘텐츠가 오픈마켓의 형태로 운영될 수 있어야 한다. (3) 디지털교과서는 학습자에게 적절한 학습 피드백을 제공하기 위하여 모든 학습활동 정보를 축적하고 관리될 수 있는 인프라를 표준에 따라 구축하여 교육 빅데이터 처리의 기반을 제공하여야 한다. 이북 표준인 EPUB 3.0을 기반으로 하는 오픈 디지털교과서는 (1) 학습활동 정보를 기록하고 (2) 이 학습활동 지원을 위한 서버와 통신하여야 한다. 현재 표준으로 정해져 있지 않은 이북의 기록과 통신 기능을 EPUB 3.0의 JavaScript로 구현하여 현재 EPUB 3.0 뷰어에서도 활용하면서 이를 차세대 이북 표준 또는 교육을 위한 이북 표준(EPUB 3.0 for education)으로 제안하여 향후 제정된 표준 이북 뷰어에서는 JavaScript없이도 처리되도록 하는 전략이 필요하다. 향후 연구는 제안한 오픈 디지털교과서 표준에 의한 오픈소스 프로그램을 개발하고, 개발된 오픈 디지털교과서의 학습활동정보를 활용한 새로운 교육서비스 방안(교육 빅데이터 활용방안 포함)을 제시하는 것이다.

• 한국식품영양과학회지
• /
• 제46권7호
• /
• pp.876-885
• /
• 2017

본 연구의 목적은 홍콩 소비자를 대상으로 가정식사대용식(HMR, Home Meal Replacement) 제품의 소비실태와 HMR 제품 개발 요구도를 파악하고, 식생활 라이프스타일에 따른 HMR 시장세분화 전략을 제시하고자 하였다. 홍콩 전문기관에 등록된 패널 중 가정식사대용식을 이용한 경험이 있는 소비자 521명을 대상으로 온라인 설문조사를 통해 수집된 자료를 SPSS(ver. 23.0) 통계 프로그램을 이용하여 분석하였다. 홍콩 소비자의 식생활 라이프스타일에 따른 군집별 HMR 구입 특성은 HMR 유형별 구매횟수, 구매장소, 1회 구매 시 비용, 구매이유 등 모든 항목에서 집단 간 유의적인 차이를 나타냈다. 식생활 라이프스타일에 따라 '식생활 고관심 집단', '식생활 중관심 집단', '식생활 저관심 집단'으로 군집을 나누었으며, HMR 제품 개발 요구도는 '식생활 고관심 집단'은 저염 식품> 발열식 편의식> 저당 식품> 저칼로리 식품 순으로, '식생활 중관심 집단'은 저염 식품> 저당 식품> 저칼로리 식품> 영양적 완전식품 순으로, '식생활 저관심 집단'은 저당 식품> 저염 식품> 다양한 신메뉴> 휴대가 간편한 건조식품 순으로 집단 간 차이를 보여주었다. 군집별 '식생활 고관심 집단'은 남성의 비율이 높았고 연령대로는 20~29세의 젊은 층이며, 직업은 사무 관리직과 기혼의 비율이 높았다. HMR 구매 시 1회 비용은 15,000~20,000원 미만이 가장 높게 조사되었다. '식생활 중관심 집단'은 여성과 남성의 비율이 비슷하게 나타났으며, 연령대로는 30~39세, 기혼의 비율이 높게 나타났다. HMR 구매 시 1회 비용으로는 10,000원 미만과 10,000~15,000원대의 중 저가격대를 구매하는 것으로 나타났다. '식생활 저관심 집단'은 여성과 미혼 그리고 사무 관리직의 비율이 높았으며, HMR 구매 시 1회 비용은 10,000원 미만의 비율이 가장 높아 상대적으로 다른 집단보다 저가의 HMR 제품을 구입하는 것으로 나타났다. 홍콩시장 진출을 위한 세분시장별 HMR 제품 개발 및 마케팅 전략을 제시하면 다음과 같다. '식생활 고관심 집단'은 식생활 관심이 높은 집단으로 시장세분화 전략의 집중과 투자가 이루어져야 할 집단으로 생각된다. HMR 제품 유형의 대안으로는 현재 홍콩 소비자들이 관심을 보이는 건강 웰빙에 주목하여 영양적인 면을 고려한 프리미엄급의 HMR 제품, 건강을 코드로 한 제품 개발이 필요하며, 식품안전관리인증기준(HACCP)에 근거한 식재료 선택의 진정성과 안전성까지 고려해야 할 것이다. '식생활 중관심 집단'은 안전과 건강을 중요시하며 HMR 제품의 미각 요인에 관심을 가지는 집단으로 맛에 중점을 둔 다양한 HMR 신제품의 출시가 필요하리라 생각된다. '식생활 저관심 집단'은 간편성과 편의성을 추구하는 집단으로 간편하여 추가적인 조리가 필요 없는 완성된 음식으로 시간을 절약할 수 있으며, 가격의 합리화가 이루어져야 할 것이다. 앞으로 HMR 제품의 방향은 건강을 코드로 하여 집에서 만드는 것과 같은 맛과 정성까지 고루 갖추며, 편의성을 고려한 HMR 제품이 필요한 때이다. 이를 위해서는 유기농, 친환경 식재료를 사용하고 고객의 편리성을 극대화할 수 있도록 반조리 제품의 다양화가 필요할 것이다. 또한, 소량, 소포장, 12시간 이내에 소비자에게 배송되는 서비스, 바코드나 QR코드로 영양성분이나 조리법까지도 알 수 있는 서비스 등 간편과 웰빙을 추구하는 홍콩 소비자의 니즈를 반영한 HMR 제품의 출시에 기업과 정부의 지속적인 노력이 필요할 것으로 생각된다. 본 연구 결과는 HMR 제품 개발을 위한 마케팅 전략에 필요한 기초 자료로 활용될 수 있을 것이며, 수출용 HMR 제품 개발에 소비자의 니즈가 반영된 신제품의 방향을 제시하여 산업적 활용 전략을 구축하기 위한 시장세분화 전략에 기초 자료를 제공하고자 하였다.

• 마케팅과학연구
• /
• 제19권4호
• /
• pp.32-43
• /
• 2009

信任在心理学, 经济学, 社会学中已被广泛研究, 其重要性不仅在市场营销中被强调, 在一般商业原则中也被强调. 供应商和买家之间的关系与过去不同, 过去的关系需要相当大的私人网络优势, 并可能涉及不道德的商业行为. 而在以工业营销成功的为核心的二十一世纪激烈的全球竞争中, 供应商和买家之间的关系是伙伴关系. 在相互合作的高级别信任的基础上, 通过交换的关系, 这会给买家和供应商带来长期的利益, 竞争力增强和交易成本的降低以及其他福利. 尽管现有的研究有信任的重要性, 但是在购买与供应关系中却忽视了信任的作用, 也没有系统地分析信任对关系的影响. 因此, 深入研究, 确定买家和商业服务供应商之间信任和关系绩效之间的联系是绝对需要的. 本研究中的商业服务, 包括那些支持制造业, 正作为下一代经济增长的引擎而吸引着人们的注意. 韩国政府已选择其作为制造业发展的战略领域. 由于商业服务开放市场的需求日趋激烈, 商业服务业的竞争力应该比以往得到更多的提倡. 本研究的目的是探索相互信任对买家和供应商之间的关系绩效的影响. 具体来说, 本研究在商业服务交易中提出了一个关于信任-关系绩效的理论模型, 并实证检验根据模型而提出的假设. 这项研究表明, 研究结果有战略意义. 本研究通过多种方法收集经验数据. 这些方法包括通过电话, 邮件和面试. 作为样本的公司是在韩国供应和购买商业服务的以知识为本的公司. 本研究收集的是二进的基础数据. 每个样本公司对包括购买公司及其相应的供应公司. 并跟踪调查每个公司对的相互信任. 本研究为商业服务的买卖双方提出了信任-关系绩效的模型. 该模型由信任和它的前因和后果. 买家的信任分为对供应公司的信任和对销售人员的信任. 根据Doney 和Cannon (1997)的研究我们在个人水平和组织水平上观察信任. 通常情况下, 买方是信任的受体, 但这项研究我们建议以供应商为观察受体. 因此, 它独特的关注了双边角度的知觉风险. 换言之, 供应商和买家一样, 是信任的主体, 因为交易通常是双边的. 从这个角度来看, 供应商对买家信任和买方对供货商的信赖一样重要. 供应商的信任从某种程度上受它信任的买方公司和买家的影响. 这种使用个人水平和组织水平的信任分类是根据Doney 和Cannon (1997)的研究. 信任影响供应商的选择, 这是一项双向放的工作. 供应商们积极参与供应商选择过程中, 和买家密切的一起工作. 此外, 该过程从某种程度上受每一方信任的合作伙伴的影响. 挑选过程包括一些步骤: 识别, 信息检索, 供应商选择和绩效评价. 作为这一进程的结果, 买家和供应商都进行绩效评估, 并就这些结果为基础, 采取有形或无形的纠正行动. 本研究中使用的关于信任的测量问项是根据Mayer, Davis 和 Schoorman (1995) 以及Mayer和Davis (1999)的研究发展起来的. 根据他们的建议, 有关信任的三个方面的研究包括有能力, 善和完整. 根据商业服务这个背景我们调整了原来的问题. 例如, 如 "他/她的专业能力" 已被改为 "当我们讨论我们的产品时销售人员表现出专业能力. "这项研究使用的测量问项不同于在以往的研究中使用的问项（Rotter 1967; Sullivan和Peterson 1982; Dwyer和Oh 1987. 本研究中有关信任的前因后果的测量问项是根据Doney和Cannon (1997)的研究为基础制定的. 根据商业服务这个背景我们调整了原来的问题. 特别是, 问题被设计为对买家和供应商以解决下列因素: 信誉 (诚信, 客户服务, 良好意愿), 市场地位 (公司规模, 市场份额, 在行业中的地位), 愿意定制（产品, 过程, 交付), 信息共享(专有信息, 个人信息), 愿意保持良好关系, 认为专业, 权威授权, 买方与卖方的相似性, 以及接触频率. 作为信任相应的变量, 我们对关系绩效进行了测试. 关系绩效分为有形的影响, 无形影响, 和副作用. 有形的影响包括财务业绩;无形的影响, 包括关系的改善, 网络开发, 以及内部员工的满意度;副作用包括既不是有形影响也不是无形影响的影响. 我们联系了350对公司, 105对公司答复了我们. 由于不完整我们删除了5对公司, 105对公司被用于数据分析. 用于数据分析的回应率为30%(三百五十零分之一百零五), 高于工业营销的平均回复比率. 至于回复的公司的特点, 大多数的公司运作的商业服务既为买方(85.4%)也为供应商(81.8%). 大部分买家是做消费品贸易(76%), 而供应商的大部分(70%)是做工业品贸易. 这可能意味着买家的过程是购入材料, 部件和组件从而生产消费品成品. 正如他们对他们与合作伙伴关系的长度的报告表示, 供应商比买家有更长的商业关系. 假设1测试买方-供应方特点对信任的影响. 销售人员的专业度(t=2.070, p<0.05)和权威授权(t=2.328, p<0.05)积极影响买方对供应方的信任. 另一方面, 权威授权(t=2.192, p<0.05)积极影响供应方对买方的信任. 对买方和供应方来说, 权威授权的程度对保持对彼此的信任有关键作用. 假设2测试买卖双方关系特点对信任的影响. 买家倾向于信任供应方, 因为供应方总是尽全力联系买方(t=2.212, p<0.05)这种倾向性在供应方方面也表现得很强(t=2.591, p<0.01). 另一方面, 供应商对买方的信任是由于供应商感知买家与自己的相似性(t=2.702, p<0.01). 这一发现证实了Crosby, Evans, 和Cowles(1990)的研究结果. 他们的结果表明供应方和买方通过商务或私务的定期会议来建立彼此的联系. 假设3测试信任对感知风险的影响. 结果表明无论对买方还是供应方, 信任越低, 感知风险就越大(买方: t =-6.621, p<0.01; 供应方: t=-2.437, p<0.05). 有趣的是, 这一趋势已被证明对买方更强. 这种较高水平的感知风险的一个可能的解释是在商业服务交易中买方通常比供应方感知到更大的风险. 为此, 有必要对供应商对买方实施减少风险的战略. 假设4测试信任对信息搜集. 根据结果, 对供应方和买方, 与预期相反, 信任取决于他们合作伙伴的名誉(买方t=2.929, p<0.01; 供应方t=2.711, p<0.05). 这一发现表明, 具有良好信誉的供应商往往是可信的. 以往的经验并没有显示出任何与买家或供应商信任的重要关系. 假设5测试信任对供应方/买方选择的影响. 与买方不同, 当供应方认为以往与买方的交易重要时, 供应方倾向信任买方(t=2.913 p<0.01). 但是, 本研究并没有现实资源忠诚和买方对供应方的信任之间有显著关系. 假设6测试的是信任对关系绩效的影响. 对买方和供应方, 当财务表现被报告提高时, 他们比较信任他们的合作伙伴(买方: t=2.301, p<0.05;供应方: t=3.692, p<0.01). 有趣的是, 这种趋势在供应方比较明显. 类似的, 当竞争力被报告提高时, 买卖双方比较信任他们的合作伙伴(买方t=3.563, p<0.01 ; 供应方t=3.042, p<0.01). 对供应方来说, 当对买方信任时效率和生产力会提高(t=2.673, p<0.01). 其他绩效指标与信任没有显著关系. 这项研究结果有一定的战略意义. 首先和最重要的是, 以信任为基础的交易对供应商和买家而言都是有益的. 根据研究证实, 通过努力建立和保持相互信任可以使财务表现提高. 同样, 可以通过同样的努力提高竞争力. 第二, 以信任为基础的交易能够减少购买情况中的感知风险. 这对供应商和买家都有启示. 人们普遍认为, 在一个高度参与的采购情况中买家感知到更高的风险. 为了减少风险, 以往的研究已建议供应商制定降低风险的策略. 而本研究的特点是从双边角度关注知觉风险. 换言之, 供应商也容易存在风险, 特别是当他们提供的服务, 需要非常先进的技术, 操作和维护. 因此, 购买者和供应商必须一起密切合作解决问题. 因此, 相互信任在问题解决过程中起着关键作用. 第三, 在这项研究中发现, 销售人员有更多的授权, 他或她越被信任. 这一发现从战术角度看是非常重要的. 建立信任是一个长期的任务, 然而, 当互信尚未开发, 供应商能够通过授权销售人员做出某些决定来克服遇到的问题, 这一结论也适用于供应商.

• 한국유통학회지:유통연구
• /
• 제15권1호
• /
• pp.1-24
• /
• 2010

국내 대형마트 점포 수는 2008년 기준 403개로 포화시점에 근접하고 있다. 이러한 경쟁상황에서 '점포충성도(store loyalty)'가 지속적 경쟁우위를 위한 전략적 도구로써 그 활용성이 점점 더 중요시 되고 있다. 다양한 관점에서 점포충성도를 대형마트 연구의 핵심적 과제 다루어왔으나, 통합적인 연구 접근 방법이 미흡한 실정이다. 따라서 본 연구에서는 통합적 관점에서 점포충성도가 형성되는 두 가지 경로를 제안하였다. 이중경로모형은 첫째, 내재적 경로 '서비스품질$\rightarrow$고객만족$\rightarrow$점포충성도', 둘째, 외재적 경로 '점포개성$\rightarrow$점포동일시$\rightarrow$점포 충성도'로 구성된다. 조사대상은 대형마트를 이용하는 소비자들을 대상으로 진행하였으며, 구조방정식모형 분석을 통하여 제안된 이중경로모형의 적합성 및 가설검증을 실시하였다. 연구결과, 모형의 적합지수들은 상당히 좋은 값들을 보여주고 있다. 또한 본 연구에서 새롭게 제시된 내재적 경로인 서비스품질은 고객만족에 정의 영향을 미치고, 고객만족은 결과변수인 대형마트의 점포충성도에 매우 유의하게 영향을 준 것으로 나타났다. 그리고 외재적 경로에서 대형마트의 점포개성은 점포동일시에 긍정적인 영향을 주고 매개변수인 점포개성은 점포충성도에 영향을 미치는 것으로 나타났다. 이를 통해 본 연구는 대형마트의 점포충성도 형성에 관한 두 가지 경로를 제시함으로써, 이론적, 관리적 시사점을 도출하였고 연구의 한계점과 미래연구방향을 제시하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국작물학회지
• /
• 제8권1호
• /
• pp.129-177
• /
• 1970

수도작에 있어서 수량성의 향상과 경영의 합리화률 기하기 위한 집단재배의 기술체계를 확립하고자 지역과 지대별로 임의선정된 18개소에서 집단재배와 개별재배를 한 수도에 대하여 경종 및 생육ㆍ수량구성요소의 변이를 조사연구하였으며 460개소의 집단재배와 개별재배에 대하여 경종ㆍ경영 및 조직운영등을 비교조사하고 집단재배와 개별재배의 경제성을 분석하여 그 결과를 요약하면 아래와 같다. 1. 집단재배와 개별재배의 경종 및 생육ㆍ수량형질에 관하여 연구한 결과는 다음과 같다. (1) 육묘에 있어서 집단재배가 비료의 3요소 특히 인산과 가리의 사용량이 많았고 약제살포의 횟수도 많았다. (2) 본답에 있어서의 경종기술은 집단재배가 개별재배보다 ${\circled1}$ 이앙기가 빨랐고 ${\circled2}$ 재식밀도에 있어서 1주당 재식묘수는 적으나 단위면적당의 포기수는 많으며 \circled3 시비량은 질소, 인산, 가리 및 퇴비의 시용량이 현저히 많았고 ${\circled4}$ 분시횟수도 많았으며 ${\circled5}$ 살충제 및 살균제의 살포횟수도 역시 집단재배에서 많았다. (3) 도북의 정도는 집단재배가 약간 더 하였고 병해충의 발생정도는 잎도열병, 목도열병 그리구 멸구, 이화명충 1화기 및 2화기의 발생이 집단재배가 적었다. (4) 집단재배를 한 수도의 간장 및 수장은 길고 고중도 무거웠다. 그리고 조고비율은 집단재배에 있어서 80.9%, 개별재배가 69.9%로서 높은 유의차가 있었다. (5) 수량구성요소인 수수와 1수평균영화수가 집단재배에서 현저히 많았고 현미 1000립중도 무거웠으며 등숙율은 개별농가의 벼와 차이가 없었고 그 변이계수는 집단재배가 개별재배에 비하여 모두 작은 값을 보였다. (6) 현미수량은 평균 10a당 집단재배 459.0kg, 개별재배 374.8kg으로서 84.2kg이나 전자가 많았으며 그들간의 변이계수는 집단재배에서 작게 나타났다. (7) 기간재배기술과 수량구성요소의 상관관계에 있어서 고도의 유의상관을 보인 것은 파종기와 1수영화수, 못자리 약제살포횟수와 1수영화수, 이앙기와 1수영화수, 본답의 인산시용량과 수량, 본답의 가리시용량과 등숙율, 분시횟수와 수량등에서 정(+)상관을 보였고 파종기와 등숙율간에는 부(-)상관을 보였다. 2. 집단재배와 개별재배의 경종\ulcorner경영 및 조직운영에 대하여 종합적으로 조사비교한 결과는 다음과 같다. (1) 집단재배의 품종수는 13개이고 개별재배에서는 47품종으로서 개별재배가 품종의 단순화를 기하지 못하고 있다. (2) 육묘기술에 있어서 비료3요소 특히 인산과 가리의 시용량이 많았고 약제살포횟수가 많다는 것은 1ㆍ의 실험결과와 같으며 이밖에 집단재배의 경우에는 종자소특이 100% 실시되었으며 파종량도 3.3$m^2$당 표준파종량인 3.6～5.4이 파종이 많이 실시되었으나 개별재배에서는 박파와 밀파가 많아 파종량의 변이가 컸었다. (3) 이앙기, 재식밀도, 병충해방제, 약제살포횟수, 시비량 및 분시횟수등은 1.의 결과와 같으며 추경 및 객토와 동력경운기의 사용은 집단재배에서 많았으며 이앙방식은 종전의 정방형식에서 극단적인장방형식으로 많이 바뀌었으며 물관리에 있어서는 중각낙수와 간단관수가 비교적 많이 실시되었다. (4) 현미수량은 평균 10a당 집단재배가 466kg이고 개별재배는 380kg으로서 전자가 86kg 많았다. (5) 병충해방제작업이 집단재배에서 집단방제로 많이 실시되었고 종자소독도 80% 이상의 공동으로 이루어 졌으며 수확, 수확물의 운반, 탈곡, 논갈이 작업등도 개별재배에서 보다 많이 공동으로 이루어졌다. (6) 집단재배에서 객토 및 퇴비의 사용이 현저히 많았으며 그 작업도 공동으로 이루어진 비율이 높고 또한 노동력의 투입도 많았다. (7) 육묘 및 본답의 물관리작업은 집단재배가 개별재배보다 노동력의 투입이 적었다. (8) 비료, 농약 및 노동력등의 비용가액은 집단재배가 개별재배보다 많았으며 약 2배에 가까웠다. (9) 경영규모는 3ha로부터 7ha 이상의 범위에 있으며 5ha내외의 것이 많았고 1개소의 집단재배는 10～20개 정도의 필지로 되어있는 것이 대부분이었다. (10) 경영자 및 경작자의 학력은 집단재배의 회장, 재배반장, 방제반장 및 수리반장 모두 국민학교졸업 이상이 93.7%이며 개별재배는 83%를 보였고 그들의 연령은 40～45세가 가장 많으며 이러한 경향은 양자가 비슷하였다. (11) 집단재배의 운영에 관한 주요설문에 대한 경작자들의 반응은 집단재배를 함으로서 확실히 수량은 증가하였는데 이것은 시비법개선과 병충해방제의 효과가 가장 컸다고 생각하는 사람이 많았고 집단재배를 함으로서 영농자재의 입수와 모든 작업이 적기에 이루어 졌다고 하는 것이 많았다. 또한 경작노력은 적게 들었다는 것이 66.8%이며 이앙노력은 집단재배가 오히려 더 들었다는 것 그리고 관의 간섭이 많았다는 것 등이 특이한 것이며 집단재배의 계속을 원하는 농가가 74.5%이고 원치 않은 농가가 25.5%였었다. 3. 집단재배와 개별재배의 경제성을 분석한 결과는 다음과 같다. (1) 경영비의 비용가액중 퇴비, 금비, 농약대 및 고용노임은 집단재배에 있어서 개별재배보다 각각 335원, 199원, 388원 및 303원이 더 투입되어 큰 차이를 보였으나 기타생산비목들은 집단재배와 개별재배간에 큰 차이가 없었다. (2) 총수익에서 경영비를 뺀 소득은 집단재배에서 24,302원이였고 개별재배에서는 20,168원으로 집단재배에서 10a당 4,134원의 소득증대를 나타내었다. 본 연구에서 수도집단재배는 새로운 기술의 적용도를 높이고 경영의 합리화를 기하여 안전다수확으로 개개 농가의 소득증대에 기여하였을 뿐만아니라 농민에게 새 기술의 적용이 유익했다는 실증을 보여 줌으로서 농민 스스로의 생산과정에 파급적이며 영속적인 변화를 촉진시킬것이라는 또 하나의 결론을 얻었다.

• 농업과학연구
• /
• 제4권2호
• /
• pp.344-390
• /
• 1977

본(本) 연구(硏究)는 계획기간내(計劃期間內)의 재적수확량(材積收穫量)을 최대화(最大化)하고 각분기(各分期)의 수확량(收穫量)과 수확면적(收穫面積)을 일정(一定) 범위(範圍)로 제약(制約)하여 계획기간내(計劃期間內)의 보속수확(保續收穫)을 도모(圖謀)하는 동시(同時)에 후계림(後繼林)의 법정영급배치(法正令級配置)가 유도(誘導)될 수 있는 적정수확안(適正收穫案)을 선형계획법(線型計劃法)에 의하여 선정(選定)하고, 제약량(制約量)의 변화(變化)가 총수확량(總收穫量) 및 분기별(分期別) 수확량(收穫量)과 수확면적(收穫面積)에 미치는 영향(影響)을 구명(究明)하는데 목적(目的)이 있다. 서울 대학교(大學校) 농과대학(農科大學) 부속연습림중(附屬演習林中) 개벌작업급(皆伐作業級)에 속하는 219개(個) 소반(小班)을 대상(對象)으로 하였으며, 이 삼림(森林)은 영급구성면(令級構成面)에서 볼 때 유영급(幼令級) 임분(林分)이 많다는 점(點)에서 전국(全國) 삼림(森林)을 대표(代表)한다고 할 수 있다. 본(本) 연구(硏究)에서는 한 분기년수(分期年數)를 5년(年), 계획기간(計劃期間)을 10분기(分期), 1영급(令級)을 5영개(令皆)로 하였으며, 벌채영급(伐採令級)의 범위(範圍)는 5~9영급(令級)이다. 한편, 후계림(後繼林)은 현실림(現實林)이 수확(收穫)되는 즉시 조림(造林)되고, 미립목지(未立木地)는 1분기내(分期內)에 조림(造林)되며 다음 벌기(伐期)까지 충분(充分)한 입목도(立木度)가 이루어지는 것으로 전제(前提)하였다. 소반(小班)을 벌구(伐區)로 하여, 각벌구(各伐區)가 계획기간내(計劃期間內)에 벌채(伐採)될 수 있는 모든 가능(可能)한 대체수확안(代替收穫案)을 그의 영급(令級)에 따라 작성(作成)하고, 여기에 현실림(現實林)과 후계림(後繼林)의 벌기예상수확량(伐期豫想收穫量)을 대입(代入)하여 각대체안(各代替案)의 계획(計劃) 기간내(期間內) 수확량(收穫量)($V_{i,\;k}$)을 산정(算定)하였다. 이때 각벌구(各伐區)의 벌기예상수확량(伐期豫想收穫量)은 기존(旣存) 임분수확표(林分收穫表)와 산림조사부(山林調査簿) 자료(資料)를 이용(利用)하는 범위내(範圍內)에서 추정(推定)하였으며, 각벌구(各伐區)에 소속(所屬)되는 대체수확안중(代替收穫案中)에서 $V_{i,\;k}$가 가장 큰 수확안(收穫案)을 적정수확안(適正收穫案)으로 선정(選定)하였다. 우선 제약조건(制約條件)이 없을 때의 적정수확안(適正收穫案)을 선정(選定)하여 분기별(分期別) 수확량(收穫量)과 수확면적(收穫面積), 총수확량(總收穫量)을 계산(計算)한 다음, 이를 기준(基準)으로 하여 분기별(分期別) 수확량(收穫量)의 상한(上限)($V_{j-max}$)과 하한(下限)($V_{j-min}$) 및 수확면적(收穫面積)의 상한(上限)($A_{j-max}$)과 하한(下限)($A_{j-min}$)을 결정(決定)하였다. 이러한 여러가지 제약조건하(制約條件下)의 적정수확안(適正收穫案)은 LP수확조절(收穫調節)모델을 유도(誘導)하여 선정(選定)하였으며, 제약조건(制約條件) 및 벌채영급범위(伐採令級範圍)의 변화(變化)가 총수확량(總收穫量)에 미치는 영향(影響)을 분석(分析)하고자 감응도분석(感應度分析)을 실시(實施)하였다. 본(本) 연구(硏究) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 제약조건(制約條件) 없이 적정수확안(適正收穫案)을 선정(選定)한 결과(結果), 수확면적(收穫面積)이 분기별(分期別)로 큰 차이(差異)를 보였다. 즉, 총수확량(總收穫量)의 68.8%가 10분기(分期)에 편재(偏在)되어 있고 6~7분기(分期)에는 전(全)혀 수확량(收穫量)이 없으며, 분기별(分期別) 수확면적(收穫面積)도 이와 유사(類似)한 경향(傾向)을 보였다. 이와 같이 분기별(分期別) 수확량(收穫量) 및 수확면적(收穫面積)에 차이(差異)가 많은 것은 현실림(現實林)의 영급구성(令級構成)과 입목축적(立木蓄積)이 대단히 불규칙(不規則)하기 때문이다. 2. 수확량(收穫量)과 수확면적(收穫面積)의 분기별(分期別) 변동폭(變動幅)을 줄이면서 계획기간내(計劃期間內)의 재적수확량(材積收穫量)을 최대화(最大化)하고자, LP수확조절(收穫調節) 모델에 의하여 $A_{min}=150ha$ $A_{max}=400ha$, $V_{min}=5,000m^3$, $V_{max}=50,000m^3$일 때의 적정수확안(適正收穫案)을 선정(選定)한 결과(結果), 대체(大體)로 5분기(分期) 이후(以後)부터 보속수확(保續收穫)과 법정영급배치(法正令級配置)가 가능(可能)하게 되었다. 3. LP수확조절(收穫調節)모델에 간벌계획(間伐計劃)을 포함(包含)시켜 최적해(最適解)를 구(求)하면, 총수확량(總收穫量)이 증가(增加)함은 물론, 간벌계획(間伐計劃)을 포함(包含)시키지 않았을 경우(境遇)에 비하여 분기별(分期別) 보속수확(保續收穫)의 실현(實現)에 유리(有利)한 적정수확안(適正收穫案)을 선정(選定)해 주는 효과(效果)가 있다. 4. 보속수확(保續收穫)과 법정영급배치(法正令級配置)가 실현(實現)될 수 있는 시기(時期)는 제약량(制約量)의 강도(强度)가 높아짐에 따라서 빨라지며, 분기별(分期別) 수확량(收穫量)은 수확면적(收穫面積)에 비하여 제약량(制約量)의 변화(變化)에 따른 평준화(平準化) 경향(傾向)이 뚜렷하고, 분기별(分期別) 수확량(收穫量)의 평준화(平準化)가 이루어지면 분기별(分期別) 수확면적(收穫面積)은 이에 종속(從屬)되어 평준화(平準化)하는 경향(傾向)이 있다. 5. 제약조건(制約條件)의 강도(强度)가 높아짐에 따라 총수확량(總收穫量)은 점감적(漸減的)으로 감소(減少)하므로 빠른 시기(時期)에 엄정보속(嚴正保續)과 엄정영급배치(嚴正令級配置)를 의도(意圖)할 수록 총수확량(總收穫量)의 손실(損失)은 그만큼 더 증가(增加)한다. 6. 같은 계획기간(計劃期間) 및 제약조건하(制約條件下)에서의 총수확량(總收穫量)은 벌채영급(伐採令級)을 낮추고, 그 범위(範圍)를 넓힐수록 증가(增加)한다. 또한 벌채영급(伐採令級) 범위(範圍)의 상한(上限)을 고정(固定)하고, 그 하한(下限)을 1영급(令級)씩 높였을 때에 총수확량(總收穫量)이 감소(減少)되는 속도(速度)는, 그 범위(範圍)의 하한(下限)을 고정(固定)하고 상한(上限)을 1영급(令級)씩 낮추었을 때의 감소(減少) 속도(速度)보다 크다. 7. 본(本) 연구(硏究)에 제시(提示)된 LP수확조절(收穫調節)모델은 영급구성(令級構成)이 복잡(複雜)한 임분(林分)에 적용(適用) 가능(可能)하며, 간벌계획(間伐計劃)을 간단히 포함(包含)시킬 수 있고, 제약량(制約量)의 변화(變化)에 따른 총수확량(總收穫量)의 손실(損失)을 쉽게 계측(計測)할 수 있는 등 여러가지 장점(長點)이 있으므로, 우리나라의 현행(現行) 삼림수확조절법(森林收穫調節法)을 보완(補完)하기 위해서도 이 기법(技法)이 유효(有效)하게 이용(利用)될 수 있을 것으로 보인다.

• 한국산림과학회지
• /
• 제15권1호
• /
• pp.1-38
• /
• 1972

우리나라는 근래(近來) 고도경제성장(高度經濟成長)으로 인(因)하여 목재수요(木材需要)가 급증(急增)하고 있으나 국내생산재(國內生産材)가 공급율(供給率)은 수요량(需要量)의 20% 정도(程度)에 지나지 않아 많은 외재(外在)를 도입(導入)하고 있으므로 장래(將來)의 목재(木材) 수요공급(需要供給)의 균형(均衡)을 이룩하기 위하여 강력(强力)한 산림자원(山林資源) 조성사업(造成事業)의 추진(推進)이 요망(要望)된다. 산림자원(山林資源) 조성사업(造成事業)을 추진(推進)하는데 있어서 가장 중요(重要)한 것은 조림의욕(造林意慾)을 높이고 조림사업(造林事業)에 필요(必要)한 산업자본(産業資本)을 산림(山林)에 유치(誘致)하도록 하는 일인데, 이러한 역할(役割)을 할 수 있는 경제적시설(經濟的施設)의 하나가 산림보험제도(山林保險制度)의 실시(實施)인 것이다. 산림보험(山林保險)을 실시(實施)하면 산림재해(山林災害)가 보상(補償)되므로 자본가(資本家)는 안심(安心)하고 조림투자(造林投資)를 할 수 있을 뿐만 아니라 산림(山林)을 담보(擔保)로 한 금융(金融)의 길도 열리어 투자(投資)한 산림(山林)에 환금성(換金性)이 주어지므로 산업자본가(産業資本家)가 산림투자(山林投資)를 회피(回避)하지 않게 되어 산림자원(山林資源) 조성사업(造成事業)이 촉진(促進)될 수 있다. 이러한 관점(觀點)에서 외국(外國)에서는 19세기말(世紀末)부터 산림보험제도(山林保險制度)가 실시(實施)되기 시작(始作)하여 주요(主要) 임업선진국(林業先進國)에서는 모두 산림보험(山林保險)을 실시(實施)하고 있는 것이다. 산림보험(山林保險)을 실시(實施)하는데 있어서 가장 중요(重要)한 것은 장기간(長期間)에 걸친 산림재해(山林災害)의 통계자료(統計資料)를 정확(正確)히 조사(調査)하는 일과 그 나라의 여건(與件)에 맞는 산림보험제도(山林保險制度)를 창설(創設)하는 일이다. 과거(過去) 10년간(年間)(1961~1970)의 년평균(年平均) 산림재해상황(山林災害狀況)을 조사(調査)한 결과(結果)는 산림화재(山林火災)가 9,000여정보(餘町步), 곤충피해(昆蟲被害)가 570,000정보(町步), 병균피해(病菌被害)가 694정보(町步)로 나타났다. 특(特)히 그중 외국(外國)의 산림보험(山林保險)에서 재해보상(災害補償) 대상(對象)의 으뜸이 되고 있는 산림화재(山林火災) 피해상황(被害狀況)을 과거(過去) 18년간(年間)(1953~1970)에 걸쳐서 조사(調査)한 결과(結果)에 의하면 산화면적(山火面積) 위험율(危險率)이 $\frac{1.1853}{1,000}$였고 1960~1969년(年) 사이의 전국(全國) 산림화재면적(山林火災面積) 위험율(危險率)은 $\frac{1.3045}{1,000}$로서 유우럽에 비(比)하여 높았으나 일본(日本)에 비(比)하여 그리 높지 않았다. 또 과거(過去) 5년간(年間)(1966~1970)의 전국(全國)의 산화재적(山火材積) 위험율(危險率)은 $\frac{0.1991}{1,000}$로서 대단(大端)히 낮은데 이것은 우리나라 산림(山林)의 축적(蓄積)이 빈약(貧弱)한데서 온 결과(結果)였다. 이러한 산림재해상황(山林災害狀況)에 비추어 우리나라에서 산림보험(山林保險)을 실시(實施)하려면 어떠한 내용(內容)의 산림보험제도(山林保險制度)를 설립(設立)하는 것이 좋겠는가 하는 질문조사(質問調査)의 결과(結果)는 다음과 같았다. 1. 산림보험(山林保險)의 필요성(必要性) 산림보험(山林保險)은 산림담보(山林擔保)에 의(依)한 금융(金融)의 길을 열어주고(5.65%), 산림피해(山林被害)를 당(當)하였을 때 재조림비(再造林費)를 확보(確保)하게 하여(35.87%), 조림투자(造林投資)를 보증(保證)하는 수단(手段)(46.74%)으로 반드시 실시(實施)되어야 한다고 응답(應答)하였다. 2. 산림보험법(山林保險法) 산림(山林)의 특수성(特殊性)에 비추어 일반(一般) 손해보험(損害保險) 규정(規程)을 준용(準用)할 것이 아니라(8.35%), 산림보험(山林保險)을 위한 특별볍(特別法)을 제정(制定)하여야 한다고 응답(應答)하였다(88.26%). 3. 보험경영업체(保險經營業體)의 종류(種類) 일반(一般) 보험회사(保險會社)(17.42%)나 산림소유자(山林所有者) 상호조합(相互組合)(23.53%)에서 산림보험(山林保險)을 취급(取扱)할 수도 있겠으나, 산림보험(山林保險)의 특이성(特異性)에 비추어 국(國) 공영산림보험(公營山林保險)의 별도(別途)로 운영(運營)되어야 한다고 반응(反應)하였다(56.18%). 4. 보험사고(保險事故)의 종류(種類) 산림보험(山林保險) 사고(事故)를 산화(山火)에 국한(局限)시키거나(23.38%), 산화(山火) 및 기상해(氣象害)만을 포함(包含)시키면 된다는 의견(意見)도 있으나(14.32%), 산림보험(山林保險) 사고(事故)에 산화(山火), 기상해(氣象害), 병충해(病蟲害)까지 포함(包含)시켜야 한다는 의견(意見)이 가장 많았다(60.68%). 5. 보험사고(保險事故) 취급대상(取扱對象)의 종류(種類) 산림보험(山林보험) 취급대상(取扱對象) 수종(樹種)은 침엽수(針葉樹) 인공림(人工林)에 한정(限定)시키거나(13.47%), 침엽수(針葉樹)와 활엽수(濶葉樹)의 인공림(人工林)만을 포함(包含)시키기를 원(願)하는 반응자(反應者)도 있었으나(23.74%), 많은 반응자(反應者)가 수종(樹種), 임종(林種)(인공(人工), 천연(天然)) 구별(區別)없이 모두 포함(包含)시켜야 된다고 반응(反應)하였다(61.64%). 6. 보험사고(保險事故) 취급대상(取扱對象)의 범위(範圍) 산림보험(山林保險) 사고(事故) 취급대상(取扱對象) 범위(範圍)는 10년(年) 이하(以下)의 유령림(幼齡林)만 취급(取扱)하기를 원(願)하는 자(者)(15.23%), 20년(年) 이하(以下)의 임목(林木)만을 대상(對象)으로 하면 족(足)하다는 반응자(反應者)가 있었으나(32.95%), 많은 반응자(反應者)가 40년생(年生) 이하(以下)의 임목(林木)까지 포함(包含)하기를 바라고 있었다(46.37%). 7. 보험계약(保險契約) 기간(期間) 산림보험(山林保險) 계약기간(契約期間)은 1년(年) 단위(單位)가 좋다는 자(者)도 상당(相當)히 있었으나(31.74%), 과반수(過半數)가 5년(年) 단위(單位)로 계약(契約)하는 것을 바라고 있었다(58.68%). 8. 보험계약(保險契約)의 제한(制限) 5정보(町步) 미만(未滿)의 소면적(小面積)은 산림보험(山林保險) 대상(對象)에서 제외(除外)하고(20.78%), 단위(單位) 면적당(面積當) 일정(一定) 재적(材積) 또는 주수(株數)를 보유(保有)하고 있는 산림(山林)만을 계약대상(契約對象)으로 하는 것이 좋다고 반응(反應)하였다(63.77%). 9. 계약방법(契約方法) 산림보험(山林保險) 계약방법(契約方法)은 임의(任意)로 산림(山林)을 선택(選擇)하여 계약(契約)하기를 원(願)하는 자(者)(32.13%), 임의(任意)로 계약(契約)하되 소유산림(所有山林) 전체(全體)를 일괄(一括) 계약(契約)하도록 하는 방법(方法)을 택(擇)하여야 한다는 자(者)(33.48%), 특정임지(特定林地)(신식지(新植地), 보조조림지(補助造林地), 고가임지(高價林地))는 의무적(義務的)으로 계약(契約)하도록 하여야 한다는 반응자(反應者)(31.92%)로 나타나 비슷한 반응(反應)을 보였다. 10. 보험료율(保險料率) 산림보험(山林保險) 요율(料率)은 지역(地域)에 따르는 위험정도(危險程度)를 참작(參酌)하여 면적비례(面積比例)로 결정(決定)하여야 한다는 의견(意見)(31.59%)과 지역(地域) 위험율(危險率)을 참작(參酌)하여 보험가액(保險價額)에 따라 정(定)해야 한다는 의견(意見)이 있었으나(31.59%), 우리 나라에는 지역적(地域的) 위험율(危險率)에 큰 차이(差異)가 없을 것이므로 전국(全國) 일률적(一律的)인 보험료(保險料)를 보험가액(保險價額)에 따라 정(定)하기를 원(願)하는 경향(傾向)이 높았다(39.55%). 11. 보험료(保險料)의 납부(納付) 산림보험료(山林保險料)는 단기(短期)는 일시불(一時拂), 장기(長期)는 매년(每年) 납부(納付)하게 하는 의견(意見)도 있으나(13.80%), 단기(短期)는 고율(高率), 장기(長期)는 저율(低率)로 하되 단기(短期), 장기(長期)를 막론(莫論)하고 매년(每年) 납부(納付)하도록 하여야 한다고 반응(反應)하였다(86.71%). 12. 보험사무(保險事務) 취급기관(取扱機關) 산림보험(山林保險) 사무(事務)의 취급(取扱) 즉(即) 창구업무(窓口業務)의 취급(取扱)을 산림행정기관(山林行政機關)에 위탁(委託)하거나(18.75%), 일반(一般) 보험회사(保險會社)에 맡기기보다는(35.76%) 산림조합(山林組合)에 위탁(委託) 취급(取扱)하게 하고 보험료(保險料)의 일정율(一定率)을 환부(還付)해주는 것이 좋다고 반응(反應)하였다(44.22%). 13. 손해보상(損害補償)의 한도(限度) 산림보험(山林保險)의 손해보상(損害補償)은 유령림(幼齡林)이 피해(被害)를 입었을 때에는 재조림비(再造林費)를 한도(限度)로 하여 보상(補償)하는 것을 원칙(原則)으로 하고 성림(成林)의 경우(境遇)에는 손해액(損害額)의 80%정도(程度)를 한도(限度)로 하여 보상(補償)하기 보다는(29.70%) 실손(實損) 현재가액(現在價額)을 보상(補償)하거나(31.07%) 조림비(造林費)의 복리계산(複利計算) 합계액(合計額)을 보상(補償)하는 것을 바라고 있었다(36.99%). 14. 보험기금(保險基金)의 조성(造成) 산림보험(山林保險)의 기금조성(基金造成)은 손해(損害) 보상액(補償額)에서 일정액(一定額)을 공제(控除) 적립(積立)하여 조성(造成)하거나(15.65%), 임야세(林野稅)를 신설(新設)하여 기금(基金)을 확보(確保)하기 보다는(33.79%), 산림보험(山林保險) 무사고(無事故)로 인(因)한 잉여금(剩餘金)에서 일정액(一定額)씩을 적립(積立)하여 산림보험기금(山林保險基金)으로 하자는 의견(意見)에 많은 반응(反應)을 하였다(44.81%). 15. 산화(山火)의 원인(原因) 산림관계직(山林關係職)에 종사(從事)하고 있는 사람들의 과거(過去)의 경험(經驗)에 비추어 본 우리나라 산화(山火)의 주요원인(主要原因)은 실화(失火)(원인불명(原因不明), 32.39%), 담배불(28.89%), 화전(火田)(19.85%)에 의한 것으로 나타났는데 산림통계(山林統計)에 나타나 있는 산화(山火)의 주요원인(主要原因)과 일치(一致)하였다. 16. 산화경방(山火警防) 산림화재(山林火災) 경방조치(警防措置)로서 가장 중요(重要)하고 실효성(實効性)이 있으며 실천(實踐)할 수 있는 삼대대책(三大對策)으로는 (1) 방화선(防火線) 설치(設置)(23.84%), (2) 건조기(乾燥期)의 입산금지(入山禁止)(21.10%), (3) 메스콤에 의한 계몽교육(啓蒙敎育)(18.01%)이라고 반응(反應)하였다.