• Korean Journal of Poultry Science
• /
• v.6 no.1
• /
• pp.12-23
• /
• 1979

This experiment was carrid out to investigate the interaction between boilelr strains and nutrition levels, and the performances of four broiler strains such as Han Hyup 603, Hubbard, Anak and Filch when they were fed by four different nutrition levels (High Protein and energy; HP. HE., Medium Protein and energy; MP. ME., Low Protein ana energy; LP. LE., and low protein and energy; LLP. LLE.). The data used in this study were obtained from a total of 1200 broiler type chicks in Poultry Testing Station, Korean Poultry Association from June 16, to August 11, 1978. Differences of all characters among four nutrition levels were significant except viability and carcass rate. HP. HE and MP. ME treatments showed nearly the same performances in body weight, feed efficiency and point, spread but they were significantly superior to those of LP. LE and LLP. LLE. There were not significant differences among four strains in feed efficiency and viability but other characters, body weight, point spread and carcass rate were observed that the performance of the best strain B was significantly superior to strain D but it was not recognized significance compared with strain A, C in tile result of statisticel analysis. In the interaction between strains and nutrition levels, body weight at high and levels showed significantly differences but at low and low nutrition levels were nearly same among four strains. Therefore this study demonstrated that comparision of body weights between strains should be performed at medium nutrition level or above. Also point spread calculated as index of body weight and feed efficiency was observed that strain B at low nutrition level is excellently higher than other strains and there were little differences at low nutrition level among all strains. It was found that ]it tie differences between performances of high arid medium levels seemed to be as the reason of high fat addition for energy source to high mutrition feed, and in general superior strain showed good performance at all the nutrition levels in$.$all characters but in body weight and point spread there were significantly different responses with different nutrition level, The most superior strain B among four strains earned the most profit per bird, Although performances of high and medium nutrition levels were nearly the same, medium nutrition level also showed the most profit because the feed cost of high nutrition level was higher than that of medium nutrition level.

• Journal of Nutrition and Health
• /
• v.42 no.2
• /
• pp.119-127
• /
• 2009

Malnutrition of hospitalized patients can adversely affect clinical outcomes and cost. Several nutritional screening tools have been developed to identify patients with malnutrition risk. However, many of those possess practical pitfalls of requiring much time and labor to administer and may not be highly applicable to a Korean population. This study sought to develop and evaluate a Nutrition Risk Screening Tool (NRST) which is simple and quick to administer and widely applicable to Korean hospitalized patients with various diseases. The study was also designed to generate a screening tool predictable of various clinical outcomes and to validate it against the Nutritional Risk Screening 2002 (NRS 2002). Electronic medical records of 424 patients hospitalized at a general hospital in Seoul during a 14-month period were abstracted for anthropometric, medical, biochemical, and clinical outcome variables. The study employed a 4-step process consisting of selecting NRST components, searching a scoring scheme, validating against a reference tool, and confirming clinical outcome predictability. NRST components were selected by stepwise multiple regression analysis of each clinical outcome (i.e., hospitalization period, complication, disease progress, and death) on several readily available patient characteristics. Age and serum levels of albumin, hematocrit (Hct), and total lymphocyte count (TLC) remained in the last model for any of 4 dependent variables were decided as NRST components. Odds ratios of malnutrition risk based on NRS 2002 according to levels of the selected components were utilized to frame a scoring scheme of NRST. A NRST score higher than 3.5 was set as a cut-off score for malnutrition risk based on sensitivity and specificity levels against NRS 2002. Lastly differences in clinical outcomes by patients' NRST results were examined. The results showed that the NRST can significantly predict the in-hospital clinical outcomes. It is concluded that the NRST can be useful to simply and quickly screen patients at high-nutritional risk in relation to prospective clinical outcomes.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2009

Biofouling in seawater reverse osmosis (SWRO) desalination process causes many problems such as flux decline, biodegradation of membrane, increased cleaning time, and increased energy consumption and operational cost. Therefore biofouling is considered as the most critical problem in system operation. To control biofouling in early stage, detection of the most problematic bacteria causing biofouling is required. In this study, six model bacteria were chosen; Bacillus sp., Flavobacterium sp., Mycobacterium sp., Pseudomonas aeruginosa, Pseudomonas fluorescens, and Rhodobacter sp. based on report in the literature and phylogenetic analysis of seawater intake and fouled RO membrane. The adhesion to RO membrane, the high pressure resistance, and the hydrophobicity of the six model bacteria were examined to find out their fouling potential. Rhodobacter sp. and Mycobacterium sp. were found to attach very well to RO membrane surface compared to others used in this study. The test of hydrophobicity revealed that the bacteria which have high hydrophobicity or similar contact angle with RO membrane ($63^{\circ}$ of contact angle) easily attached to RO membrane surface. P. aeruginosa which is highly hydrophilic ($23.07^{\circ}$ of contact angle) showed the least adhesion characteristic among six model bacteria. After applying a pressure of 800 psi to the sample, Rhodobacter sp. was found to show the highest reduction rate; with 59-73% of the cells removed from the membrane under pressure. P. fluorescens on the other hand analyzed as the most pressure resistant bacteria among six model bacteria. The difference between reduction rates using direct counting and plate counting indicates that the viability of each model bacteria was affected significantly from the high pressure. Most cells subjected to high pressure were unable to form colonies even thought they maintained their structural integrity.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• Pediatric Infection and Vaccine
• /
• v.28 no.2
• /
• pp.92-100
• /
• 2021

Purpose: Rapid detection of etiologic organisms is crucial for initiating appropriate therapy in patients with central nervous system (CNS) infection. This study aimed to evaluate the diagnostic value of the BioFire^® Meningitis/Encephalitis (ME) panel in detecting etiologic organisms in cerebrospinal fluid (CSF) samples from febrile infants. Methods: CSF samples from infants aged <90 days who were evaluated for fever were collected between January 2016 and July 2019 at the Seoul National University Children's Hospital. We performed BioFire^® ME panel testing of CSF samples that had been used for CSF analysis and conventional tests (bacterial culture, Xpert^® enterovirus assay, and herpes simplex virus-1 and -2 polymerase chain reaction) and stored at -70℃ until further use. Results: In total, 72 (24 pathogen-identified and 48 pathogen-unidentified) CSF samples were included. Using BioFire^® ME panel testing, 41 (85.4%) of the 48 pathogen-unidentified CSF samples yielded negative results and 22 (91.7%) of the 24 pathogen-identified CSF samples yielded the same results (enterovirus in 19, Streptococcus agalactiae in 2, and Streptococcus pneumoniae in 1) as those obtained using the conventional tests, thereby resulting in an overall agreement of 87.5% (63/72). Six of the 7 pathogen-unidentified samples were positive for human parechovirus (HPeV) via BioFire^® ME panel testing. Conclusions: Compared with the currently available etiologic tests for CNS infection, BioFire^® ME panel testing demonstrated a high agreement score for pathogen-identified samples and enabled HPeV detection in young infants. The clinical utility and cost-effectiveness of BioFire^® ME panel testing in children must be evaluated for its wider application.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.77-100
• /
• 2015

This study examined the factors that influence the smartphone user's decision to accept the personalized mobile advertisement. As a theoretical basis, we applied the privacy calculus model (PCM) that illustrates how consumers are engaged in a dynamic adjustment process in which privacy risks are weighted against benefits of information disclosure. In particular, we investigated how smartphone users make a risk-benefit assessment under which personalized service as benefit-side factor and information privacy risks as a risk-side factor accompanying their acceptance of advertisements. Further, we extend the current PCM by considering advertisement fatigue as a new factor that may influence the user's acceptance. The research model with five (5) hypotheses was tested using data gathered from 215 respondents through a quasi-experimental survey method. During the survey, each participant was asked to navigate the website where the experimental simulation of a mobile advertisement service was provided. The results showed that three (3) out of five (5) hypotheses were supported. First, we found that the intention to accept advertisements is positively and significantly influenced by the perceived value of personalization. Second, perceived advertisement fatigue was also found to be a strong predictor of the intention to accept advertisements. However, we did not find any evidence of direct influence of privacy risks. Finally, we found that the significant moderating effect between the perceived value of personalization and advertisement fatigue. This suggests that the firms should provide effective tailored advertisement that can increase the perceived value of personalization to mitigate the negative impacts of advertisement fatigue.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.847-860
• /
• 2020

The 2-pass DInSAR (Differential Interferometric SAR) processing steps for DEM generation consist of the co-registration of SAR image pair, interferogram generation, phase unwrapping, calculation of DEM errors, and geocoding, etc. It requires complicated steps, and the accuracy of data processing at each step affects the performance of the finally generated DEM. In this study, we developed an improved method for enhancing the performance of the DEM generation method based on the 2-pass DInSAR technique of TanDEM-X bistatic SAR images was developed. The developed DEM generation method is a method that can significantly reduce both the DEM error in the unwrapped phase image and that may occur during geocoding step. The performance analysis of the developed algorithm was performed by comparing the vertical accuracy (Root Mean Square Error, RMSE) between the existing method and the newly proposed method using the ground control point (GCP) generated from GPS survey. The vertical accuracy of the DInSAR-based DEM generated without correction for the unwrapped phase error and geocoding error is 39.617 m. However, the vertical accuracy of the DEM generated through the proposed method is 2.346 m. It was confirmed that the DEM accuracy was improved through the proposed correction method. Through the proposed 2-pass DInSAR-based DEM generation method, the SRTM DEM error observed by DInSAR was compensated for the SRTM 30 m DEM (vertical accuracy 5.567 m) used as a reference. Through this, it was possible to finally create a DEM with improved spatial resolution of about 5 times and vertical accuracy of about 2.4 times. In addition, the spatial resolution of the DEM generated through the proposed method was matched with the SRTM 30 m DEM and the TanDEM-X 90m DEM, and the vertical accuracy was compared. As a result, it was confirmed that the vertical accuracy was improved by about 1.7 and 1.6 times, respectively, and more accurate DEM generation was possible with the proposed method. If the method derived in this study is used to continuously update the DEM for regions with frequent morphological changes, it will be possible to update the DEM effectively in a short time at low cost.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• Information Systems Review
• /
• v.11 no.1
• /
• pp.161-179
• /
• 2009

Nowadays an increasing number of Internet users are running individual websites as Blog or Cyworld. As this type of personal media has a great influence on communication among people, business comes to care about Network Effect, Network Software, and Social Network. For instance, Cyworld created the web service called 'Minihompy' for individual web-logs, and acquired 2.4milion users in 2007. Although many people assumed that the popularity of Minihompy, or Blog would be a passing fad, Cyworld has improved its service, and expanded its Network with various contents. This kind of expansion reflects survival efforts from infinite competitions among ISPs (Internet Service Provider) with focus on enhancing usability to users. However, Cyworld's Network Effect is gradually diminished in these days. Both of low production cost of service vendors and the low searching/conversing costs of users combine to make ISPs hard to keep their market share sustainable. To overcome this lackluster trend, Cyworld has adopted new strategies and try to lock their users in their service. Various efforts to improve the continuance and expansion of Network effect remain unclear and uncertain. If we understand beforehand how a service would improve Network effect, and which service could bring more effect, ISPs can get substantial help in launching their new business strategy. Regardless many diverse ideas to increase their user's duration online ISPs cannot guarantee 'how the new service strategies will end up in profitability. Therefore, this research studies about Network effect of Cyworld's 'Minihompy' using System-Dynamics method which could analyze dynamic relation between users and ISPs. Furthermore, the research aims to predict changes of Network Effect based on the strategy of new service. 'Page View' and 'Duration Time' can be enhanced for the short tenn because they enhance the service functionality. However, these services cannot increase the Network in the long-run. Limitations of this research include that we predict the future merely based on the limited data. We also limit the independent variables over Network Effect only to the following two issues: Increasing the number of users and increasing the Service Functionality. Despite of some limitations, this study perhaps gives some insights to the policy makers or others facing the stiff competition in the network business.