• Water Engineering Research
• /
• 제5권3호
• /
• pp.133-146
• /
• 2004

Soil and water assessment tool (SWAT) was simulated based on the default parameters and a priori soil parameter estimation method in Bocheong watershed of Korea. The performance of the model was tested against the measured daily runoff data for 5 years between 1993 and 1997. The sensitivity analysis of SWAT model parameters was conducted to identify the most sensitive model parameters affecting the model output. The results of SWAT simulation indicate that the overall performance of SWAT in calculating daily runoff is reasonably acceptable. However, there is a problem in estimating the low flow components of streamflow since the low flow components simulated by SWAT are significantly different from the measured low flow. The sensitivity analysis with SWAT points out that soil related parameters are the most sensitive parameters affecting surface and ground water balance components and groundwater flow related parameters exhibit negligible sensitivity.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.697-703
• /
• 2018

In this paper, we analyzed the operation of the ignition circuit for electronic arm and fire device(EAFD), and investigated the sensitive elements of the circuit system. For reliability analysis, the EAFD ignition circuit was modeled using the PSpice simulation tool, and the output results of the circuit were examined by changing the tolerance of each circuit element. Monte Carlo simulation was used by maintaining the values of the observed sensitive elements at ${\pm}10%$ of the original values and adjusting the values of the other components according to a random distribution. The histogram results of the output peak currents and pulse widths were represented by Weibull and Burr type XII function fittings in three cases(element values are +10 %, 0 %, -10 % of original). For the output peak currents, mean values were 1.0028, 1.0034, and 1.0050, where the variance values were calculated as 0.0398, 0.0396, and 0.0290 using the Weibull function fitting, respectively. For pulse widths, the mean values of 0.9475, 0.9907, and 1.0293 with the variance values of 0.0260, 0.0251, and 0.0238 were obtained using the Burr Type XII function fittings.

• 한국미생물·생명공학회지
• /
• 제27권1호
• /
• pp.8-14
• /
• 1999

This study was developed to evaluate the growth inhibition effects of cell wall components of Enterococcus faecalis 2B4-1 obtained from feces of neonates against tumor cell lines. Polysaccharide fraction (PS) shown sensitive growth inhibition effect in the cell wall components was isolated and characterized. In growth inhibition effects, residue fractin of whole cell was shown sensitive level of percent survival about 30% when administrated at ehe concentration of 100${\mu}$g/ml, and that was more effective than that of supernatant fraction against the tumor cell lines, SNU-1, 3LL, FARROW and HEC-1-B. Sensitive growth inhibition effects against SNU-1, FARROW and HEC-1-B were performed by whole cell (WC) fraction from Ent. faecalis 2B4-1. Cytoplasm fractin (CP) of WC was shown non-inhibition effect, however, the other part of WC, precipitate of disrupted cell (PD), was sensitive against the tumor cell line mentioned above. Followed by separation to peptidoglycan fraction (PG) and polysaccharide fraction (PS) were all sensitive which the latter was shown more sensitive percent survival than the former. Composed sugars of polysaccharide fraction were determined to D-glucose, L-rhamnose and D-glucosamine, and the rate fo composition was calculated to about 1:1:1 by the data of elemental analysis, IR, TLC and HPLC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권1호
• /
• pp.47-53
• /
• 1992

This paper is discussing the Optimum Structural Modification by the Sensitive Analysis Method. The mokificxation for the first Mouth Open Mode of the C type structure was done by using coordinate sensitivities and thickness sensitivities. The results obtained are as follows; 1. the vibration could be minimized by reducing multiples of mode components of impact point and response point. 2. the tooling precision of the Press machine could be minimized by reducing relative vibration amplititutes between the tool and the object to be tooled. 3. the mode componets of 2 points could be identified by using the coordinate sensitivites for the C type structure. 4. the mode components of 2 points could be iodentified by using the thickness sensitivities for the C type structure.

• 대한전기학회논문지
• /
• 제34권10호
• /
• pp.389-398
• /
• 1985

Recently maximum power demand of our country has become to be under the great in fluence of electric cooling and air conditioning demand which are sensitive to weather conditions. This paper presents the technique and algorithm to forecast the long-term maximum power demand considering the characteristics of electric power and weather variable. By introducing a weather load model for forecasting long-term maximum power demand with the recent statistic data of power demand, annual maximum power demand is separated into two parts such as the base load component, affected little by weather, and the weather sensitive load component by means of multi-regression analysis method. And we derive the growth trend regression equations of above two components and their individual coefficients, the maximum power demand of each forecasting year can be forecasted with the sum of above two components. In this case we use the coincident dry bulb temperature as the weather variable at the occurence of one-day maximum power demand. As the growth trend regression equation we choose an exponential trend curve for the base load component, and real quadratic curve for the weather sensitive load component. The validity of the forecasting technique and algorithm proposed in this paper is proved by the case study for the present Korean power system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.309-312
• /
• 1996

In view of physical mechanics, unicycle's dynamical system is a very sensitive system. Mechanical unicycle's structure has mechanical components of wheel, body frame, driving actuator and several mechanical elements. Mechanical unicycle is closed link system. Each component is chained with the others. For design of unicycle robot. we must decide the sizes, masses, positions of mechanical components throughout kinematics and kinetics analysis of unicycle robot. In this paper, we analized driving and closed link mechanism of unicycle robot

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.343-356
• /
• 2022

As a part of round robin analysis to develop a finite element elastic-plastic seismic analysis procedure for nuclear safety class 1 components, a series of parametric analyses was carried out on the simulated pressurizer surge line system model to investigate sensitivity of the analysis results to finite element analysis variables. The analysis on the surge line system model considered dynamic effect due to the seismic load corresponding to PGA 0.6 g and elastic-plastic material behavior based on the Chaboche combined hardening model. From the parametric analysis results, it was found that strains such as accumulated equivalent plastic strain and equivalent plastic strain are more sensitive to the analysis variables than von Mises effect stress. The parametric analysis results also identified that finite element density and ovalization option in the elbow elements have more significant effect on the analysis results than the other variables.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.67-75
• /
• 1998

Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1232-1237
• /
• 2008

This paper introduces an application of wavelet analysis to the sensor fusion of GPS/INS/baroaltimeter. Using wavelet analysis the baro-inertial altitude is decomposed into the low frequency content and the high frequency content. The high frequency components, 'details', represent the perturbed altitude change from the long time trend. GPS altitude is also broken down by a wavelet decomposition. The low frequency components, 'approximations', of the decomposed signal address the long-term trend of altitude. It is proposed that the final altitude be determined as the sum of both the details of the baro-inertial altitude and the approximations of GPS altitude. Then the final altitude exclude long-term baro-inertial errors and short-term GPS errors. Finally, it is shown from the test results that the proposed method produces continuous and sensitive altitude successfully.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.58-63
• /
• 2018

Recently in weapon systems development, the importance of reliability has been emphasized due to the increase in complexity and the rapid development of key components and components. Accordingly, the importance of lifespan testing is increased. However, lifespan testing to verify the reliability of a system is costly and takes a lot of time. Therefore in this paper, it was demonstrated that the most critical item of a bladder type accumulator is the bladder. Fatigue life is sensitive to temperature and pressure, with temperature having more impact. The fatigue life of the bladder was estimated to be 18,140 hr through fatigue analysis, which satisfies the required life expectancy of 10,000 hr.