• Journal of Nutrition and Health
• /
• 제36권5호
• /
• pp.515-527
• /
• 2003

Objectives： A meta-analysis of the literatures was conducted to evaluate the cost-effectiveness of medical nutrition therapy by dietitians. Methods : The 30 studies were identified from a computerized search of published research on MEDLINE, Science-Direct and the PQD database until May, 2002 and a review of reference lists. The main search terms were“dietitian”,“dietary intervention”,“nutrition intervention”, “cost”,“cost-effectiveness”and“cost-benefit analysis”. The subgroup analysis was performed by publication year, study design, intervention provider, type of patient (in/out-patient) and type of cost (total cost/direct cost). Two reviewers independently selected trials for inclusion, assessed the quality and extracted the data. Results : The 30 studies were identified using the electric database search and bibliographies. The 17 trials were eligible for inclusion criteria, then the systematic review and a meta-analysis were conducted on effectiveness and cost-effectiveness of medical nutrition therapy. The quality of the studies was evaluated using the quality assessment tool for observational studies. The quality score was 0.515 $\pm$ 0.121 (range : 0.279-0.711, median : 0.466). The meta-analysis of 17 studies based on the random effect model showed that medical nutrition therapy was highly effective in treating the diseases (effect size 0.3092 : 95% confidence interval 0.2282-0.3303). The vote-counting method, one of meta-analysis methods, was applied to evaluate the cost-effectiveness of medical nutrition therapy conducted by dietitians. Two criteria (method 1, method 2) for voting were used. The calculated p-values for method 1 (more conservative method) and method 2 (less conservative method) were 0.1250 and 0.0106, respectively. Medical nutrition therapy by dietitians was significantly cost-effective in the method 2. Conclusion. This meta-analysis showed that the effectiveness of medical nutrition therapy was statistically significant in treating disease (effect size 0.3092), and that the cost-effectiveness of medical nutrition therapy was statistically significant in the method 2 (less conservative method) of vote counting. (Korean J Nutrition 36(5): 515~527, 2003)

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.81-91
• /
• 2019

고체 로켓 모터 성능을 계산하기 위해 Face offsetting method를 사용하여 3차원 그레인 burn-back 해석을 수행하였다. 그레인 연소 형상 해석은 표면의 이동을 계산하는 이동 경계면 문제이다. 기존 연구에서는 다양한 이동 경계면 해석 기법이 그레인 burn-back 해석에 적용되었으나 결과가 불완전했다. 이에 본 연구에선 face offsetting method를 사용한 그레인 burn-back 해석 모듈을 개발하였다. Face offsetting method는 기존 해석 기법의 장점을 조합하여 강건하고 정밀한 이동 경계면 해석을 수행한다. 해석 결과, face offsetting method가 그레인 burn-back 해석에 유용함을 검증하였다.

• 분석과학
• /
• 제27권3호
• /
• pp.153-160
• /
• 2014

세계적으로 석면분석방법에 관한 다양한 연구사례가 발표되고 있는 가운데, 분석방법의 차이에 따른 석면함유물질(ACM, Asbestos Containing Material) 결과에 대한 관심이 대두되고 있다. 본 연구에서는 균질성이 확보된 ACM 시료를 시야평가법(visual estimation method)과 포인트계수법(point counting method)의 분석결과에 대한 비교 평가를 통하여 분석기관 및 분석자의 신뢰성 향상과 더불어 편광현미경 분석의 기초자료를 확보고자 하였다. 석면분석은 정성분석과 정량분석으로 구분하였으며, 석면정량을 위한 방법은 EPA 600-R-93-116의 시야평가법과 포인트계수법으로 총 400지점을 계수하는 방법으로 실시하였다. 먼저 준비된 시료의 균질성을 분산분석을 이용하여 확인한 결과 이상이 없음을 확인하였다. 정성분석의 결과는 백석면과 갈석면으로 확인되었고 정량분석결과는 포인트계수법이 시야평가법과 비교하여 전체적인 석면함유량이 저평가되는 경향과 함께 포인트계수법은 분석과정이 조금 복잡하고 분석시간이 많이 소요되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.145-151
• /
• 1994

Welded connections have been designed on basis of allowable stresses, wherein the response to loading is assumed to be totally elastic. This is the vector analysis method, which resolves the stresses determined from the direct stress formula and the torsion formula into a vector combination to obtain a solution. It has been known that this method gives conservative answers and typically a very high factor of safety. An analytical method based on the Instantaneous Center of Rotation has been developed which predicts the ultimate strength of an eccentically loaded fillet welded connection. The method of Instantaneous Center of Rotation results in weld resistance capacities greater than the vector analysis method, by recognizing the variation in fillet weld strength with respect to the direction of the applied loading and actual load-deformation response of elemental fillet welds. The procedure of numerical analysis is iterative and complex. The relations between vector analysis method and the method of Instantaneous Center of Rotation on eccentrical distance subjected to variation of load direction are presented in this paper. Considering of the effects on configuration of weld groups, the method of Instantaneous Center of Rotation are provided a more exact results of the numerical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.771-773
• /
• 2001

In this paper, three dimensional Equivalent Magnetic Circuit Method(3-D EMCN method) a numerical analysis method which supplements to magnetic equivalent circuit adding numerical technique, is proposed for analysis Optical Pickup Actuator. (3) This method provides better characteristics both in precision of the analysis and in computation time than other analysis method such as three-dimensional Finite Element Method. We choose the simple 2-magnet moving coil type pickup actuator model and verify upper yoke effect using this method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.108-115
• /
• 2002

This paper suggests a new analysis algorithm for the time historical response of three dimensional rectilinear structure which is frequently found in a pipe line system of plant by the combination of the transfer stiffness coefficient method(TSCM) and the Newmark method. The present analysis algorithm for a time historical response can improve the computational accuracy and time remarkably owing to advantages of the TSCM in comparison with transfer matrix method(TMM). The structural system is modeled as a lumped mass system in this method. The analysis algorithm was formulated far the three dimensional rectilinear structure. We confirmed the validity of the present algorithm by comparing the numerical computation results of TSCM with those of TMM.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.69-78
• /
• 2003

This paper presents a voltage analysis method of distribution systems interconnected with DG(Distributed Generation). Nowadays, small scale DG becomes to be introduced into power distribution systems. But in that case, it is difficult to properly maintain the terminal voltage of low voltage customers by using only ULTC(Under Load Tap Changer). This paper presents a voltage analysis method of distribution systems with DC for proper voltage regulation of power distribution systems with ULTC. In order to develop the voltage analysis method, distribution system modeling method and advanced loadflow method are proposed. Proposed method has been applied to a 22.9 kV practical power distribution systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.870-877
• /
• 2006

Recently, failures of equipments are linked directly to extensive damages of human lives or financial losses from the increasing uses of train control equipments utilizing computers. Then safety activities have to progress for guaranteeing safety during the system life-cycle. In this paper, we examine the methods for risk analysis and assessment of safety activities and propose optimized one method for risk assessment. There are original risk assessment methods; risk graph and risk matrix method under the qualitative analysis, IRF(Individual Risk Formula) calculations and statistical calculations method under the quantitative analysis. Best-Practice(BP) risk analysis method is proposed for combining advantages of the qualitative and the quantitative analysis. In the comparison of risk graph and risk matrix method for safety estimation, BP method has no applications published up to now, but we can expect that this method will be utilized widely for the risk assessment due to various strong points.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.122-127
• /
• 2003

This paper presents a new time-stepping 3-D analysis method coupled with an external circuit with motion equation for dynamic transient analysis of induction machines. In this method, the magneto-motive force (MMF) generated by induced current is modeled as a passive source in the magnetic equivalent network. So, by using only scalar potential at each node, the method is able to analyze induction machines with faster computation time and less memory requirement than conventional numerical methods. Also, this method is capable of modeling the movement of the mover without the need for re-meshing and analyzing the time harmonics for dynamic characteristics. From comparisons between the results of the analysis and the experiments, it is verified that the proposed method is capable of estimating the torque, harmonic field, etc. as a function of time with superior accuracy.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.239-246
• /
• 2003

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member, the design concept of strong column - weak beam, and etc. Through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy As the result economical and safe design can be achieved.