• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.50-57
• /
• 2013

The high temperature thermal attacks in welding can affect the residual stress of a frame for automotive assembly accompanying frame deformation. Also the residual stress can induce the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the deformation and residual stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design following as the variation of welding sequency. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement. In addition, the optimized welding sequency with reduced deformation after welding could be achieved through these analyses.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.77-84
• /
• 2003

Virtual work in multibody systems is frequently expressed as the inner product of the virtual displacement and the resultant force at the centroid. But provided that the resultant force is converted into the equipollent forces there is no restriction on where the analysis reference point is placed. There are basically three candidate points : the centroid, joint point and the instant global origin. The traditional fully recursive formulation uses the centroid, but the present work verifies that the instant global origin always shows better efficiency (e.g. 86% CPU time of the centroid for quarter car model) and joint point shows the efficiency between that of the centroid and the instant global origin. A discussion on how important it is to define the analysis reference point properly in a fully recursive formulation is also presented.

• Journal of applied mathematics & informatics
• /
• 제37권5_6호
• /
• pp.429-442
• /
• 2019

This article addresses the influence of partial slip condition in the hydromagnetic flow of Burgers fluid in a rotating frame of reference.The flows are induced by oscillation of a boundary. Two problems for oscillatory flows are considered. Exact solutions to the resulting boundary value problems are constructed. Analysis has been carried out in the presence of magnetic field. Physical interpretation is made through the plots for various embedded parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.371-374
• /
• 1997

Recently, the development of computer achieves a system which is similar to the mechanics of human visual system. The 3-dimensional measurement using monocular vision system must be achieved a camera calibration. So far, the camera calibration technique required reference target in a scene. But, these methods are inefficient because they have many calculation procedures and difficulties in analysis. Therefore, this paper proposes a native method that without reference target in a scene. We use the grid type frame with different line widths. This method uses vanishing point concept that possess a rotation parameter of the camera and perspective ration that perspect each line widths into a image. We confirmed accuracy of calibration parameter estimation through experiment on the algorithm with a grid paper with different line widths.

• ETRI Journal
• /
• 제28권5호
• /
• pp.574-582
• /
• 2006

In this paper, a new error concealment algorithm is proposed for the H.264 standard. The algorithm consists of two processes. The first process uses a fuzzy logic method to select the size type of lost blocks. The motion vector of a lost block is calculated from the current frame, if the motion vectors of the neighboring blocks surrounding the lost block are discontinuous. Otherwise, the size type of the lost block can be determined from the preceding frame. The second process is an error concealment algorithm via a proposed adapted multiple-reference-frames selection for finding the lost motion vector. The adapted multiple-reference-frames selection is based on the motion estimation analysis of H.264 coding so that the number of searched frames can be reduced. Therefore the most accurate mode of the lost block can be determined with much less computation time in the selection of the lost motion vector. Experimental results show that the proposed algorithm achieves from 0.5 to 4.52 dB improvement when compared to the method in VM 9.0.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2333-2335
• /
• 1998

Recently, the development of computer achieves a system which is similar to the mechanics of human visual system. The 3D measurement using monocular vision system must be achieved a camera calibration. So far, the camera calibration technique required reference target in a scene. But, these methods are inefficient because they have many calculation procedures and difficulties in analysis. Therefore, this paper proposes a native method that without reference target in a scene. We use the grid type frame with different line widths. This method uses vanishing point concept that possess a rotation parameter of the camera and perspective ration that perfect each line widths into a image. We confirmed accuracy of calibration parameter estimation through experiment on the algorithm with a grid paper with different line widths.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.18-26
• /
• 2016

This paper proposes a compensation algorithm for reducing a specific ripple component on synchronous reference frame phase locked loop (SRF-PLL) in grid-tied single-phase inverters. In general, SRF-PLL, which is based on all-pass filter to generate virtual voltage, is widely used to estimate the grid phase angle in a single-phase system. In reality, the estimated grid phase angle might be distorted because the phase difference between actual and virtual voltages is not 90 degrees. That is, the phase error is caused by the difference between cut-off frequency of all-pass filter and grid frequency under grid frequency variation. Therefore, the effects on phase angle and output current attributed to the phase error are mathematically analyzed in this paper. In addition, the proportional resonant (PR) controller is adapted to reduce the effects of phase error. The validity of the proposed algorithm is verified through several simulations and experiments.

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.435-447
• /
• 1999

It is main objective of this approach to present a method to analyse stochastic design sensitivity for problems of structural dynamics with randomness in design parameters. A combination of the adjoint variable approach and the second order perturbation method is used in the finite element approach. An alternative form of the constant functional that holds for all times is introduced to consider the time response of dynamic sensitivity. The terminal problem of the adjoint system is solved using equivalent homogeneous equations excited by initial velocities. The numerical procedures are shown to be much more efficient when based on the fold superposition method: the generalized co-ordinates are normalized and the correlated random variables are transformed to uncorrelated variables, whereas the secularities are eliminated by the fast Fourier transform of complex valued sequences. Numerical algorithms have been worked out and proved to be accurate and efficient : they can be readily adapted to fit into the existing finite element codes whose element derivative matrices can be explicitly generated. The numerical results of two cases -2 dimensional portal frame for the comparison with reference and 3-dimensional frame structure - for the deterministic sensitivity analysis are presented.

• 설비공학논문집
• /
• 제30권2호
• /
• pp.92-99
• /
• 2018

A numerical analysis of a compressor dehumidifier has been conducted focusing on the air side heat transfer, which is a part of a series research on the dehumidifier. The moving reference frame was applied to the fan modeling, and the porous model was used for the evaporator and condenser modeling. Curve fitting obtained the inertial and viscous resistances parameters to the results of the physical model of the unit cell with actual shape of a fin tube. The porous model was validated within a reasonable computation time for the range of practical inlet velocity of a dehumidifier. A parametric study has been conducted for fin number, fan speed (i.e., air flow rate), and evaporator/condenser tube arrangement. ANOVA analysis showed the dependency of each parameter on the velocity and temperature uniformity, which are desirable for high performance of the dehumidifier.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.191-199
• /
• 2000

본 연구에서는 피에조콘 시험의 유한요소해석을 수행하였다. 이를 위하여 점탄소성 bounding surface 모델, 가상일의 방정식(virtual work equation) 및 theory of mixtures를 Updated Lagrangian reference frame에서 formulation하였다. 결과적으로 구성된 유한요소 formulation을 컴퓨터 프로그래밍 하였으며 유한요소해석에서 얻은 콘 저항치, 과잉간극수압 및 간극수압소산 등의 결과를 실험치와 비교 분석하였으며 피에조콘 주변의 응력, 변형율 및 과잉간극수압의 contour를 유한요소해석에서 구하여 이를 고찰하였다. 비등방성 및 점성이 추가된 구성모델을 사용함으로서 응력의 비등방성 및 관입속도를 효과적으로 simulation할 수 있었다. 유한요소 Formulation 과정은 'I' 결과는 'II'에서 설명된다.