• Journal of Internet of Things and Convergence
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2024

The purpose of this study is to investigate the impact of education applying the Havruta learning method in fundamentals nursing classes for nursing students on problem-solving ability, self-directed learning ability, critical thinking disposition, and learning commitment. One-group pretest-posttest design was used. Nursing students received training applying the Havruta learning method for 6 weeks (12 hours) in fundamentals nursing classes. The study was conducted from September 18 to November 6, 2023. Data were analyzed using SPSS/WIN 28.0 with mean, standard deviation, and paired samples t-test. problem-solving ability (t=4.52, p<.001), self-directed learning ability(t=-4.61, p<.001), critical thinking disposition(t=-4.10, p<.001) significantly increased before and after the 6-week Havruta learning method training for nursing students. However, there was no statistically significant difference in learning commitment (t=-0.28, p=.782). The Havruta learning method is an effective nursing education tool for improving problem-solving ability, self-directed learning ability, and critical thinking disposition. The results of this study can serve as basic data for nursing professors when planning teaching and learning strategies using Havruta. Research will be needed to utilize the Havruta learning method in various classes and evaluate its effectiveness.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.19-23
• /
• 2023

The Second-generation high-temperature superconducting (HTS) Rare-Earth Barium Copper Oxide (REBCO) wire is a composite laminate having a multi-layer structure (8 or more layers). HTS wires will undergo multiple loads including the bending-tension loads during winding, high current density, and high magnetic fields. In particular, the wires are subjected to bending stress and magnetic field stress because HTS wires are wound around a circular bobbin when making a high-field magnetic. Each of the different laminated wires inevitably exhibits damage and fracture behavior of wire due to stress deformation, mismatches in thermal, physical, electrical, and magnetic properties. Therefore, when manufacturing high-field magnets and other applications, it is necessary to calculate the stress-strain experienced by high-temperature superconducting wire to present stable operating conditions in the product's use environment. In this study, the finite element model (FEM) was used to simulate the strain-stress characteristics of the HTS wire under high current density and magnetic field, and bending loads. In addition, the result of obtaining the neutral axis of the wire and the simulation result was compared with the theoretical calculation value and reviewed. As a result of the simulation using COMSOL Multiphysics, when a current of 100 A was applied to the wire, the current value showed the difference of 10^-9. The stress received by the wire was 501.9 MPa, which showed a theoretically calculated value of 500 MPa and difference of 0.38% between simulation and theoretical method. In addition, the displacement resulted is 30.0012 ㎛, which is very similar to the theoretically calculated value of 30 ㎛. Later, the amount of bending stress by the circular mandrel was received for each layer and the difference with the theoretically obtained the neutral axis result was compared and reviewed. This result will be used as basic data for manufacturing high-field magnets because it can be expanded and analyzed even in the case of wire with magnetic flux pinning.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.40-50
• /
• 2023

Recently, the number of components of smartphones increases rapidly, while the PCB size continuously decreases. Therefore, 3D technology with a stacked PCB has been developed to improve component density in smartphone. For the s tacked PCB, it i s very important to obtain solder bonding quality between PCBs. We investigated the effects of the properties, thickness, and number of layers of interposer PCB and sub PCB on warpage of PCB through experimental and numerical analysis to improve the reliability of the stacked PCB. The warpage of the interposer PCB decreased as the thermal expansion coefficient (CTE) of the prepreg decreased, and decreased as the glass transition temperature (Tg) increased. However, if temperature is 240℃ or higher, the reduction of warpage is not large. As FR-5 was applied, the warpage decreased more compared to FR-4, and the higher the number and thickness of the prepreg, the lower the warpage. For sub PCB, the CTE was more important for warpage than Tg of the prepreg, and increase in prepreg thickness was more effective in reducing the warpage. The shear tests indicated that the dummy pad design increased bonding strength. The tumble tests indicated that crack occurrence rate was greatly reduced with the dummy pad.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.323-330
• /
• 2023

The development of an analysis model that reflects the microstructure characteristics of polyvinyl alcohol (PVA) fiber-reinforced cementitious composites, which have a highly complex microstructure, enables synergy between efficient material design and real experiments. PVA fiber orientations are an important factor that influences the mechanical behavior of PVA fiber-reinforced cementitious composites. Owing to the difficulty in distinguishing the gray level value obtained from micro-CT images of PVA fibers from adjacent phases, fiber segmentation is time-consuming work. In this study, a micro-CT test with a voxel size of 0.65 ㎛³ was performed to investigate the three-dimensional distribution of fibers. To segment the fibers and generate training data, histogram, morphology, and gradient-based phase-segmentation methods were used. A U-net model was proposed to segment fibers from micro-CT images of PVA fiber-reinforced cementitious composites. Data augmentation was applied to increase the accuracy of the training, using a total of 1024 images as training data. The performance of the model was evaluated using accuracy, precision, recall, and F1 score. The trained model achieved a high fiber segmentation performance and efficiency, and the approach can be applied to other specimens as well.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.971-979
• /
• 2023

Small ships (<499 GT) constitute 46% of the existing ships, therefore, it can be concluded that they produce relatively high CO₂ gas emissions. Operating in optimal trim conditions can reduce the resistance of the ship, which results in fewer greenhouse gases. An affordable way for trim optimization is to adjust the weight distribution to obtain an optimum longitudinal center of gravity (LCG). Therefore, in this study, the effect of LCG changes on the resistance of a small planing ship is studied using empirical and numerical analyses. The Savitsky method employing Maxsurf resistance and the STAR-CCM+ commercial computational fluid dynamics (CFD) software is used for the empirical and numerical analyses, respectively. Finally, the total resistance from the ship design process is compared to obtain the optimum LCG. To summarize, using numerical analysis, optimum LCG is achieved at the 46.2% length overall (LoA) at Froude Number 0.56, and 43.4% LoA at Froude Number 0.63, which provides a significant resistance reduction of 41.12 - 45.16% compared to the reference point at 29.2% LoA.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.6
• /
• pp.281-289
• /
• 2023

PURPOSE. This study aimed to predict the positional coordinates of incisor points from the scan data of conventional complete dentures and verify their accuracy. MATERIALS AND METHODS. The standard triangulated language (STL) data of the scanned 100 pairs of complete upper and lower dentures were imported into the computer-aided design software from which the position coordinates of the points corresponding to each landmark of the jaw were obtained. The x, y, and z coordinates of the incisor point (X_P, Y_P, and Z_P) were obtained from the maxillary and mandibular landmark coordinates using regression or calculation formulas, and the accuracy was verified to determine the deviation between the measured and predicted coordinate values. Y_P was obtained in two ways using the hamularincisive-papilla plane (HIP) and facial measurements. Multiple regression analysis was used to predict Z_P. The root mean squared error (RMSE) values were used to verify the accuracy of the X_P and Y_P. The RMSE value was obtained after crossvalidation using the remaining 30 cases of denture STL data to verify the accuracy of Z_P. RESULTS. The RMSE was 2.22 for predicting X_P. When predicting Y_P, the RMSE of the method using the HIP plane and facial measurements was 3.18 and 0.73, respectively. Cross-validation revealed the RMSE to be 1.53. CONCLUSION. Y_P and Z_P could be predicted from anatomical landmarks of the maxillary and mandibular edentulous jaw, suggesting that Y_P could be predicted with better accuracy with the addition of the position of the lower border of the upper lip.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.491-499
• /
• 2023

Scattering by Sea surface roughness occurs due to sea level roughness, communication performance deteriorates by causing frequency spread in communication signals and time variation in communication channels. In order to compare the difference in time variation of underwater acoustic communication channel according to the surface roughness, an experiment was performed in a tank owned by Hanyang University Ocean Acoustics Lab. Artificial surface roughness was created in the tank and communication signals with three bandwidths were used (8 kHz, 16 kHz, 32 kHz). The measured surface roughness was converted into a Rayleigh parameter and used as a roughness parameter, and statistical analysis was performed on the time-varying channel characteristics of the surface path using Doppler spread and correlation time. For the Doppler spread of the surface path, the Weighted Root Mean Square Doppler spread (w_fσ_ν) that corrected the effect of the carrier frequency and bandwidth of the communication signal was used. Using the correlation time of the surface path and the energy ratio of the direct path and the surface path, the correlation of total channels was simulated and compared with the measured correlation time of total channels. In this study, we propose a method for efficient communication signal design in an arbitrary marine environment by using the time-varying characteristics of the sea surface path according to the sea surface roughness.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.1009-1015
• /
• 2023

This study was a one-group pretest-posttest design experimental study that attempted to verify the effects of applying the Havruta learning method on the academic self-efficacy, academic achievement, and communication skills of radiology college students. This study was conducted from May 1 to June 23, 2023, and applied the Havruta learning method for 6 weeks to 38 second-year radiologists taking a radiology technology course at a university in Jeollanam-do. SPSS/WIN 21.0 was used for data analysis, the reliability of the scale was verified, the subject's general characteristics, pre-test values and post-test values for measurement variables were verified with descriptive statistics, and the difference between before and after the Havruta learning method was verified with paired t-test. Research results show that the Havruta learning method improves academic self-efficacy (t=-2.70, p<.001), academic achievement (t=-2.87, p=.006), and communication skills (t=-2.76, p=.008). showed a statistically significant difference. As a result, Havruta learning method was confirmed as an effective learning method that improves academic self-efficacy, academic achievement, and communication skills of radiology college students. In the future, expanded application of the Havruta learning method will be necessary.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.1-22
• /
• 2023

Purpose - Southeast Asia has been the focus of Korea's foreign investment. Korea has been helping developing countries in Southeast Asia achieve economic growth and win-win cooperation through capital exports. FDI is an important channel for technology diffusion. However, the impact of FDI on the bias of technological progress in the host country is dependent on the host country's own endowment structure and capital-labor factor substitution elasticity. Therefore, the central issue of this paper is to accurately evaluate the impact of Korea's FDI to the four Southeast Asian countries in various industries on their bias of technological progress. Design/methodology - The paper uses macroeconomic data for Korea and four East Asian countries to estimate capital-labor factor elasticities of substitution using nonlinear, seemingly uncorrelated regressions (NLSUR). Then, the biased technological change index (BTCI) is calculated for each country. Finally, panel data analysis is used to explore the impact of Korean FDI in various industries in the four Southeast Asian countries on their own directed technological progress, and a robustness test is conducted. Findings - There is a substitution relationship between capital and labor factors based on their elasticity in Korea, Singapore and the Philippines. There is a complementary relationship between capital and labor factors in Indonesia and Malaysia. According to the BTCI, there is a trend toward labor-biased technological progress in all countries. Korean investments in manufacturing, wholesale and retail trade in the host country trigger capital-biased technological change in the host country; investments in the finance, insurance and information and communication sectors trigger labor-biased technological change. In addition, this paper also confirms that directed technological progress can enable cross-country transmission. Originality/value - The innovation of this paper lies in three aspects. First, we estimate the BTCI for five countries and explore the trend and situation of directed technological progress in each country from each country's own perspective. Second, we explore the impact of Korean FDI in the host country on the bias to its technological progress at the industry level. Second, we explore the impact of Korean FDI in various industries in the four Southeast Asian countries on the four countries' own directed technological progress from a national perspective. Finally, we propose corresponding countermeasures for technological progress from the perspective of inverse factor endowment. These innovative points not only expand the understanding of technological progress and cross-country technology transfer in East Asia but also provide practical references for policy-makers and business operators.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.6-22
• /
• 2023

The National Museum of Korea's 'Shinchungmyeong Jochong' is the sole firearm in the country bearing inscriptions written in ink('辛丑改備江華庫藏'). Thanks to this written record, it is possible to determine where this firearm was stored and to make an estimate of the time when it was stored. Additionally, it is a valuable artifact that has been exceptionally well preserved and has an artistic design. However, research into the operational period, form, and structural characteristics of this firearm has been limited to date. This study aimed to shed light on the operational period, form, and structural features of the 'Shinchukmyeong Jochong.' To achieve this, the specifications and structural characteristics of the firearm were examined, and comparisons were made with 17 other extant firearms and their attributes. The results confirmed that the 'Shinchungmyeong Jochong' is a representative example of the typical firearms of the Joseon Dynasty. Next, the timing, background, and production subject of the Ganghwado containment of the Jochong were tracked based on letters found with the Jochong. The investigation revealed an entry in the 'Records of King Jeongjo'(『正祖實錄』) indicating that a significant amount of military supplies, including firearms, were stored on Ganghwado in December of the 5th year of Shinchung(1781). The decision to store these materials in Ganghwado Island may have been due to the perception of the Joseon decision-makers, who strategically valued Ganghwado Island, and the relocation of 'Tongaoyeong'(統禦營) and the integration with 'Jinmuyeong'(鎭撫營). After acquisition, it is presumed that the firearm was operated at locations like 'Jinmuyeong'(鎭撫營). The firearm's production is presumed to have been associated associated with institutions such as 'Gungisi'(軍器寺). In conclusion, the 'Shinchungmyeong Jochong' exemplifies a typical firearm of the Joseon Dynasty, and it is likely that it was stored on Ganghwado in December of 1781. Its production is believed to have been related to institutions such as 'Gungisi'. Following its acquisition, it is presumed that the firearm was operated at locations including 'Jinmuyeong'.