• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1157-1164
• /
• 2001

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few research have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan. We assume that the impeller rotates with a constant angular velocity and the flow field of the impeller is incompressible and inviscid. So, a discrete vortex method(DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowsons method is used to predict the acoustic source. In order to compare the experimental data, a centrifugal impeller and wedge introduced by Weidemann are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal.

• Water for future
• /
• v.28 no.4
• /
• pp.185-194
• /
• 1995

The objective of this study is to explore scale problem and to analyze the relations between scale and geomorphologic parameters of the rainfall-runoff model. Generally, measurement and calculation of geomorphologic parameters rely on and are sensitive to the resolution of source information available. Therefore, rainfall-runoff models using geomorphologic parameters should take account of the effects of the map scale used in their development. The derived rainfall-runoff model considering scale problem in this research is the GIUH type model, that is a basin IUH consisting of the channel network response and hillslope response. The cannel network response is computed by means of the diffusion analogy transformed from linearized St. Venant equation and hillslope response is calculated by 2-parameter gamma distribution function. Representing geomorphologic structure of the channel network and initial distribution of its response is width function. This width function is derived by fractal theory and Melton's law to consider scale problems and is weighted by the source location function (SLF) proposed in this research to increase the applicability.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.67-73
• /
• 1996

In general, the high quality audio coding(HQAC) has the structure of the convertional data compression techniques combined with moodels of human perception. The primary auditory characteristic applied to HQAC is the masking effect in the spectral domain. Therefore spectral techniques such as the subband coding or the transform coding are widely used[1][2]. However no effort has yet been made to apply the temporal masking effect and temporal redundancy removing method in HQAC. The audio data compression method proposed in this paper eliminates statistical and perceptual redundancies in both temporal and spectral domain. Transformed audio signal is divided into packets, which consist of 6 frames. A packet contains 1536 samples($256{\times}6$) :nd redundancies in packet reside in both temporal and spectral domain. Both redundancies are elminated at the same time in each packet. The psychoacoustic model has been improved to give more delicate results by taking into account temporal masking as well as fine spectral masking. For quantization, each packet is divided into subblocks designed to have an analogy with the nonlinear critical bands and to reflect the temporal auditory characteristics. Consequently, high quality of reconstructed audio is conserved at low bit-rates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.557-561
• /
• 2014

In this work, Altair Engineering's vibroacoustic modeling approach is used to simulate the acoustic signature of a simplified automobile in a wind tunnel. The modeling approach relies on a two step procedure involving simulation and extraction of acoustic sources using a high fidelity Computational Fluid Dynamics (CFD) simulation followed by propagation of the acoustic energy within the structure and passenger compartment using a structural dynamics solver. The tools necessary to complete this process are contained within Altair's HyperWorks CAE software suite. The CFD simulations are performed using AcuSolve and the structural simulations are performed using OptiStruct. This vibroacoustics simulation methodology relies on calculation of the acoustic sources from the flow solution computed by AcuSolve. The sources are based on Lighthill's analogy and are sampled directly on the acoustic mesh. Once the acoustic sources have been computed, they are transformed into the frequency domain using a Fast Fourier Transform (FFT) with advanced sampling and are subsequently used in the structural acoustics model. Although this approach does require the CFD solver to have knowledge of the acoustic simulation domain a priori, it avoids modeling errors introduced by evaluation of the acoustic source terms using dissimilar meshes and numerical methods. The aforementioned modeling approach is demonstrated on the Hyundai Simplified Model (HSM) geometry in this work. This geometry contains flow features that are representative of the dominant noise sources in a typical automobile design; namely vortex shedding from the passenger compartment A-pillar and bluff body shedding from the side view mirrors. The geometry also contains a thick poroelastic material on the interior that acts to reduce the acoustic noise. This material is modeled using a Biot material formulation during the structural acoustic simulation. Successful prediction of the acoustic noise within the HSM geometry serves to validate the vibroacoustic modeling approach for automotive applications.

• Korean Journal of Veterinary Research
• /
• v.35 no.1
• /
• pp.95-105
• /
• 1995

The human homolog of position specific element of mouse Hoxa-7 was studied using transgene. It contains a 1.1 kb human DNA (HCR)- a homolog to the intergenic region between Hoxa-7 and -9, which directs the position specific expression of Hoxa-7-, tk promoter, LacZ (${\beta}$-galactosidase) gene as a reporter, and polyadenylation signal of SV40 large T antigen. It was injected into the mice embryos, and the resulting transgenic embryos were analysed through PCR as well as genomic Southern blotting with placenta DNA. Out of 20 embryos analysed, two were transgenic. Among them, one transgenic embryo expressed transgene when stained with X-gal. The expression pattern was in analogy to that of the mouse Hoxa-7, showing spatially restricted expression pattern, Since the expression of ${\beta}$-galactosidase is regulated by the upstream human HCR sequence, it implies that the HCR is the plausible position specific regulatory element of human.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.759-768
• /
• 2012

This paper proposes a method to determine the elastic follow-up factors for the $C(t)$-integral under secondary stress. The rate of creep crack growth for transient creep is correlated with the $C(t)$-integral. Elastic follow-up behavior, which occurs in structures under secondary loading, prevents a relaxation of stress during transient creep. Thus, both the values of $C(t)$ and creep crack growth increase as increasing elastic follow-up. An estimation solution for $C(t)$ was proposed by Ainsworth and Dean based on the reference stress method. To predict the value of $C(t)$ using this solution, an independent method to determine the elastic follow-up factors for cracked bodies is needed. This paper proposed that the elastic follow-up factors for $C(t)$ can be determined by elastic-plastic analyses using the plastic-creep analogy. Finite element analyses were performed to verify this method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.425-433
• /
• 2001

A correlation between fatigue damage and acousto-ultrasonic (AU) parameters has been obtained from signals acquired during fatigue loading of the single-lap joints of a carbon-fiber reinforced plastic (CFRP) laminates and A16061 plate. The correlation showed an analogy to those representing the stiffness reduction $(E/E_0)$ of polymer matrix composites by the accumulation of fatigue damage. This has been attributed to the transmission characteristics of acoustic wave energy through bonded joints with delamination-type defects and their influence on the change of spectral content of AU signals. Another correlation between fatigue cycles and the spectral magnitude of acoustic emission (AE) signals has also been found during the final stage of fatigue loading. Both AU and AE can be applied almost in real-time to monitor the evolution of damage during fatigue loading.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.439-447
• /
• 1999

One of the problems for practical use of fiber-reinforced plastics is the performance degradation by fatigue damage in the joints. The study is to develop a nondestructive technique for real-time evaluation of adhesively bonded composite-metal joints. From the prior study we confirmed that the bonding strength can be estimated from the correlation between the qualify of bonded parts and AUP's. We obtained a curve showing the correlation between the degree of fatigue damage and AUP's calculated from signals acquired during fatigue loading of single-lap and double-lap joints of CFRP and Al6061. The curve is an analogy to the one showing stiffness reduction ($E/E_o$) of polymer matrix composites by fatigue damage. From those facts, it is plausible to predict the degree of fatigue damage in real-time. Amplitude and AUP2 appeared to be optimal parameters to provide more reliable results for single-lap joints whereas Amplitude and AUP2 did for double-lap joints. It is recommended to select optimal parameters for different geometries in the application for real structures.

• Archives of design research
• /
• v.15 no.1
• /
• pp.27-36
• /
• 2002

To do this, study of human memory and theoretical approach on form in general is carried out to compare the types of memories and the stage of perceive theoretically to discover the relationship between psychological perceive and form. In the second please, scenario of form recognition in cultural aspect is studied through various written records to obtain unbiased critics on what a person can feel from a form through various analysis and experiment. Examples will be given on products designed on the basis of correlation with form through analysis. Through this procedure, elements of reactions on implicit and explicit is derived (Data obtained from experiments on computers and inquiries are used) Analyzed elements are than divided into, general knowledge, memories of reality and subconsciousness memories and basic mental image and user mental image and mental image of form of each products are analyzed. In the third phase, the way of adapting of the elements obtained from the analysis of implicit and explicit reaction to the field of design is predicted. Together with this, future theme this the study will be suggested. Confusions obtained from this study can be listed as below.

• Journal of Fashion Business
• /
• v.1 no.3
• /
• pp.19-34
• /
• 1997

The role of fashion image in modern society is being diversified from product planning to consumer satisfaction. In this research, after surveying female college students, the diversified modern fashion image was patterned. On the analogy of the relationship between these patterned image and design factors, the following conclusion was obtained. 1. The most popular styles are jacket and pants suits, three-piece outfits, tight mini-skirts and X-silhouette. Little decoration is used in general. simplicity is shown as trend by utility fabrics in single color-black, brown, beige and blue-with no pattern. Various materials such as wool, cotton, wool or cotton blended with other materials, silk, satin, knit, lace, vinyl and leather are used. 2. Fashion image is divided into four factors; factors that show fad, dignity, activity and simplicity. 3. Factors that show fad; style of tops, material of bottoms and length of bottoms reflect fad. blousons, three-piece outfits, pants rather than skirts, X-silhouette and mini-skirts are prevailing. Vinyl, leather, knit, lace and satin are the materials well used. 4. Factors that show dignity; Style and material of tops, the way of top and bottom pieces are matched and length of bottom or pieces reveal the characteristics. Jackets, blouses, half-coats and one-piece outfits rather than two-pieces are popular. Tight skirts in natural or midi length or pleated skirts are common. Wool, wool blended with other materials, leather and X-silhouette are design factors that reveal dignity well. 5. Design factors that show active image; Straight pants, three-piece outfits, T-shirts, shirt -blouses, vests, and blausons are popular. Knit and lace are used for tops, leather and vinyl are used for bottom pieces and cotton is widely used. Y- or H-silhouette are used to show active image.