• Clinical and Experimental Reproductive Medicine
• /
• 제43권4호
• /
• pp.185-192
• /
• 2016

Chronic endometritis (CE) is a condition involving the breakdown of the peaceful co-existence between microorganisms and the host immune system in the endometrium. A majority of CE cases produce no noticeable signs or mild symptoms, and the prevalence rate of CE has been found to be approximately 10%. Gynecologists and pathologists often do not focus much clinical attention on CE due to the time-consuming microscopic examinations necessary to diagnose CE, its mild clinical manifestations, and the benign nature of the disease. However, the relationship between CE and infertility-related conditions such as repeated implantation failure and recurrent miscarriage has recently emerged as an area of inquiry. In this study, we reviewed the literature on the pathophysiology of CE and how it may be associated with infertility, as well as the literature regarding the diagnosis and treatment of CE. In addition, we discuss the value of hysteroscopic procedures in the diagnosis and treatment of CE.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.613-616
• /
• 2001

공 부활제로 KCI, Cl, S 및 P를 각각 첨가한 발광충을 전자 빔 방법에 의해 성장시킨 2중 절연구조의 SrS:Ce electroluminescent(EL) device를 제작하여, 공 부활제가 EL device의 휘도에 미치는 영향을 조사였다. 휘도 및 발광파장은 첨가되는 공 부활제 및 농도에 의하여 상당한 영향을 받고 있음을 알았다. 어느 공 부활제에서나 전체 휘도는 0.2 mol%에서 최고를 나타냈으며, CeCl$_3$+KCL를 첨가한 소자가 최고 850cd/$m^2$를 나타내었다. 또한 CeP를 첨가한 소자의 경우 전체 휘도는 낮았으나 청색 휘도의 비율은 가장 높았으며, 이 비율은 농도의 상승에 따라 증가했다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2010-2015
• /
• 2003

In this paper, a design and control of the safe arm with passive compliant joints(PCJ) is presented. Each PCJ has a magneto- rheological damper and maximum 6 springs. Compliance analysis in Cartesian space is performed with the compliance ellipsoid; this analysis shows a map between compliance in the joint space and compliance in Cartesian space. Vibration control of the arm using an input shaping technique is also presented; the results of a simulation and an experiment prove that a fast motion of the safe arm without residual vibration can be performed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.259-260
• /
• 2006

Effects of Rb doping on the aging characteristics have been studied in SrS:Ce thin film electroluminescence (EL) devices. It has been found that a luminance saturation and decrease of an EL efficiency are suppressed by Rb doping. For the SrS:Ce,Rb device, a luminance and an efficiency after 1024 h of aging at 1 kHz drive maintain at about 70% and 80% of the initial values, respectively.

• 약학회지
• /
• 제41권5호
• /
• pp.539-546
• /
• 1997

Capillary electrophoresis (CE) is perceived as an attractive tool for the analysis of pharmaceuticals and biological materials because of their high separation efficiency, easy separation and low running cost. New concept of micellar electrokinetic capillary chromatography (MECC) expanded the application of CE to the separation of neutral molecules. Validation of CE as an analytical technique for quality control of pharmaceuticals should be confirmed by quantitative analysis and the peak confirmation. In this study, the quantitative analyses of various types of neutral, acidic and basic components (acetaminophen, caffeine, ascorbic acid, riboflavin, thiamine, chlorpheniramine, phenylpropanolamine, dl-methylephedrine and dextromethorphan) in complex cold medicines have been accomplished using CE. Combined methods of MECC using SDS and capillary zone electrophoresis lowering the pH of running buffer were adopted to determine the ingredients in capsule type or liquid formula complex medicines without particular sample pretreatment. The results indicate that CE is a promising technique for quality control analysis of pharmaceuticals as a validation method.

• The Korean Journal of Ceramics
• /
• 제1권4호
• /
• pp.219-223
• /
• 1995

Ceramic membranes of the supported $TiO_2-CeO_2$ were prepared by dip-coating method on an $\alpha-Al_2O_3$ porous substrate. The mean pore diameter of an alumina support was 0.125 um. The mean particle diameter of $TiO_2-CeO_2$ top layer varied with firing temperature and ranged from 20 to 85 nm. The thermal stability of the composite membranes was studied from their surface microstructure after calcination at $600-900^{\circ}C$. The supported $TiO_2-CeO_2$ composite membranes exhibited much higher heat resistance than the $TiO_2$ membrane.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.339-344
• /
• 2018

The Cu loading of a cubic $Ce_{0.8}Zr_{0.2}O_2$-supported Cu catalyst was optimized for a single-stage water gas shift (WGS) reaction. The catalyst was prepared by a co-precipitation method, and the WGS reaction was performed at a gas hourly space velocity of $150,494h^{-1}$. The results revealed that an 80 wt% $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalyst exhibits excellent catalytic performance and 100% $CO_2$ selectivity ($X_{CO}=27%$ at $240^{\circ}C$ for 100 h). The high activity of 80 wt% $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalyst is attributed to the presence of abundant surface Cu atoms and the low activation energy of the resultant process.

• 청정기술
• /
• 제19권2호
• /
• pp.128-133
• /
• 2013

$CeO_2$에 담지된 구리산화물에서 벤젠의 촉매연소 반응에 대해 연구하였다. 담지된 구리산화물 촉매들은 볼밀법과 함침법으로 제조하였고, XRD, FT-IR, TEM 및 TPR에 의해 특성분석을 하였다. 볼밀법으로 제조된 CuO/$CeO_2$ 촉매는 높은 담지량에서도 잘 분산된 CuO를 얻었다. 볼밀법으로 제조된 CuO/$CeO_2$ 촉매는 함침법으로 제조된 촉매에 비해 높은 활성을 보여주었다. CuO의 담지량이 증가할수록 촉매 활성이 증가하였으며, 10 wt%로 담지된 촉매에서 가장 높은 활성을 나타내었다. 또한, 10 wt% CuO/$CeO_2$ 촉매에 소량의 $Fe_2O_3$와 CoO의 조촉매 첨가는 CuO의 분산도를 높여 반응활성을 증가시켰다.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.12-16
• /
• 2008

In this work, nano size $BaCeO_3$, which is a possible flux pinning medium of melt processed $YBa_{2}Cu_{3}O_x$ superconductor, was synthesized by the conventional solid state reaction method using powders. $BaCeO_3$ and $CeO_2$ were mixed thoroughly using a ball milling for 24 hours and calcined at $1200^{\circ}C$ for 5 hours for the formation $BaCeO_3$ powder. The obtained $BaCeO_3$ powder was attrition milled at various milling times of 60 min, 120 min and 240 min. The $BaCeO_3$ powders of various milling times were mixed with $YBa_{2}Cu_{3}O_x$ powder. Seed melt processed $YBa_{2}Cu_{3}O_x$-$BaCeO_3$ (15wt.%) superconductors were prepared and the superconducting properties were investigated. It was found that $T_c$ of $Y_{1.5}Ba_{2}Cu_{3}O_x$ samples was not significantly affected by $BaCeO_3$ addition, but $J_c$ of samples was increased by $BaCeO_3$ addition. The $J_c$ improvement by fine $BaCeO_3$ powder (120 min attrition-milled) was effective at low magnetic fields less than 2 T.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1989-1996
• /
• 2006

The $NiSO_4/CeO_2-ZrO_2 $catalysts containing different nickel sulfate and $CeO_2$ contents were prepared by the impregnation method, where support, $CeO_2-ZrO_2$was prepared by the coprecipitation method using a mixed aqueous solution of zirconium oxychloride and cerium nitrate solution followed by adding an aqueous ammonia solution. No diffraction line of nickel sulfate was observed up to 20 wt %, indicating good dispersion of nickel sulfate on the surface of $CeO_2-ZrO_2$. The addition of nickel sulfate (or $CeO_2$) to $ZrO_2$ shifted the phase transition of $ZrO_2$ from amorphous to tetragonal to higher temperatures because of the interaction between nickel sulfate (or $CeO_2$) and $ZrO_2$. A catalyst (10-$NiSO_4/1-CeO_2-ZrO_2$) containing 10 wt % $NiSO_4$ and 1 mole % $CeO_2$, and calcined at $600{^{\circ}C}$ exhibited a maximum catalytic activity for ethylene dimerization. The catalytic activities were correlated with the acidity of catalysts measured by the ammonia chemisorption method. The role of $CeO_2$was to form a thermally stable solid solution with zirconia and consequently to give high surface area, thermal stability and acidity of the sample.