• 감성과학
• /
• 제1권2호
• /
• pp.13-22
• /
• 1998

The sense of touch has both objective and subjective characteristics. During hand evaluation of the fabrics. psycho physiological processes such as emotion and stimulation. On other site, the mode of touch (passive vs. active) is also capable to modulate somatosensory responses. I.e., suppress somatocensory perception during active electrocortical responses to passive and active touch of the textiles with different subjective emotional preference. The study was carried out on 36 female college students. Physiological signals were acquired by Grass and BIOPAC 100 systems with AcqKnowledge variables, namely heart rate (HR), respiratory sinus arrhythmia (RSA), pulse transit time (PTT), respiration rate (RSP) and skin conductance parameters (SCL, amplitude, risetime and number of SCRs) were analyzed for baseline and stimulation conditions. Analysis was manifested in a form of moderate HR acceleration. RSP increase, RSA decrease (lowered vagal tone), decreased PTT and increased electrodermal activity (increased SCL, several SCRs) that reflects general sympathetic activation. Parietal EEG effects (on contra-lateral side to stimulated hand)were featured by short-term alpha-blocking, slightly reduced theta, significantly increased delta and enhanced fast beta activity with few variations across stimuli. The main finding of the study was that most and least preferred textures exhibited significant differences in autonomic (HR, RSP, PTT, SCR, and at less extent in RSA and SCL) and electrocortical responses (delta, slow and fast alpha, fast beta relative power). These differences were recorded both in passive and active stimulation modes, thus demonstrating reproducibility of distinction between most and least emotionally preferred tactile stimuli, suggesting influence of psychological factors, such as emotional property of stimulus, on physiological outcome.

• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.218-224
• /
• 2007

PZT와 같은 압전 재료는 능동 진동 억제 분야에서 널리 사용되고 있지만 단일 PZT의 경우 장착 과정에서의 손상, 전기 누전, 낮은 피로 성능과 같은 문제가 지적되고 있다. 이러한 문제를 해결하기 위하여 개발된 LIPCA 작동기는 여러 층의 복합재료와 PZT 층으로 구성되어 있다. 본 연구에서는 LIPCA 작동기를 끝단 질량이 부착된 알루미늄 외팔보의 진동을 억제하는데 적용하였다. 양변위 되먹임 제어 알고리듬을 사용하였으며, 필터 주파수를 대상 모드의 첫 번째 고유진동수에 맞추었다. 실험적으로 구한 알루미늄 보의 고유 진동수는 유한요소 해석의 결과와 잘 일치하였다. LIPCA 작동기를 능동 진동제어에 적용할 때 효율성을 시간과 주파수 영역에서 확인하고자 하였는데, 실험 결과 PPF제어를 사용한 LIPCA 작동기가 자유 진동의 안정화 시간과 강제 진동의 진폭을 효과적으로 제어할 수 있었다. 사례 연구로 다른 두께를 가지는 보의 강제 진동 제어를 수행하였다.

• 천문학회지
• /
• 제37권4호
• /
• pp.159-169
• /
• 2004

This is a proposal to probe local part of the interplanetary dust (IPD) cloud complex and retrieve mean volume emissivity of the local IPDs at mid-infrared wavelengths. This will be done by monitoring, with Infrared Camera (IRC) aboard the ASTRO-F, the annual modulation of the zodiacal emission. In pointing mode of the ASTRO-F mission the spacecraft can make attitude maneuvering over approximately ${\pm}1^{\circ}$ range centered at solar elongation $90^{\circ}$ in the ecliptic plane. The attitude maneuvering combined with high sensitivity of the IRC will provide us with a unique opportunity observationally to take derivatives of the zodiacal emission brightness with respect to the solar elongation. From the resulting differential of the brightness over the ${\pm}1^{\circ}$ range, one can directly determine the mean volume emissivity of the local IPDs with a sufficient accuracy to de-modulate the annual emissivity variations due to the Earth's elliptical motion and the dis-alignment of the maximum IPD density plane with respect to the ecliptic. The non-zero eccentricity ($e_{\oplus}$= 0.0167) of the Earth's orbit combined with the sensitive temperature dependence of the Planck function would bring modulations of amplitude at least $3.34\%$ to the zodiacal emission brightness at mid-infrared wavelengths, with which one may determine the IPD temperature T(r) and mean number density n(r) as functions of heliocentric distance r. This will in turn fix the power-law exponent $\delta$ in the relation $T(r) = T_o(r/r_o)^{-\delta}$ for the dust temperature and v in $n(r) = n_o(r/r_o)^-v$ for the density. We discuss how one may de-couple the notorious degeneracy of cross-section, density, reference temperature $T_o$ and exponent $\delta$.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.393-400
• /
• 2003

본 논문에서는 EQM(Engineering Qualification Model)급 Ku 대역 위성 중계기용 입력 멀티플렉서 설계 및 결과에 대하여 언급하였다. 각 채널은 Circulator Chain구조를 이용하여 분리되었으며, 채널 대역내에서의 진폭 변화와 군지연 변화를 최소화하기 위하여 각각의 채널은 채널필터 외부에 등화기를 사용하였다. 위성중계기의 무게와 부피를 최소화하기 위하여 채널필터와 등화기 모두 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널 필터는 8차 타원 응답형으로 설계하였으며, 등화기는 2차 반사형으로 설계하였다. 온도 변화에 따른 특성 변화를 최소화하기 위하여 필터와 등화기의 공동(cavity), 슬롯, 튜닝나사는 INVAR36을 사용하여 제작하였다. 제작한 입력 멀티플렉서는 진동 시험, 열진공 시험, EMC 시험을 실시하였으며 시험결과 Ku 대역 위성 중계기에 적용 가능한 성능을 나타내었다.

• 한국추진공학회지
• /
• 제10권3호
• /
• pp.41-47
• /
• 2006

로켓 연소기에서 음향 공명기의 음향 동조에 미치는 평균 유동 및 노즐 감쇠 효과를 수치해석적으로 연구하였다. 본 연구에서는 분사기가 연소실내 음향 감쇠를 위한 공명기로서 사용된다. 연소실내 평균 유동의 마하수가 증가함에 따라 제 1 접선 방향 모드의 공진 주파수가 미약하게 감소하였으나 최적의 분사기 동조 길이는 거의 변화가 없었다. 노즐 감쇠는 공진 주파수나 최적 동조 길이에 영향을 미치지 못하며, 다만 음향 진동 진폭을 변화시킬 뿐이었다. 이러한 결과로부터, 평균 유동과 노즐 감쇠가 음향 공 동조에 미치는 영향은 미미함을 알 수 있었다. 분사기의 장착 개수가 증가할수록 음향 진동 진폭이 감소하였으나, 분사기와 연계된 새로운 음향 모드가 발생함을 알 수 있었다.

• 한국광학회지
• /
• 제19권1호
• /
• pp.15-19
• /
• 2008

크기가 작고 감도가 높은 중공 광섬유를 이용한 In-Line 마이켈슨 간섭계형 전압 센서를 개발하였다. 개발된 In-Line 마이켈슨 갑섭계는 끝 단면은 단일모드광섬유에 연결되어 있고 다른 끝 단면은 깨끗하게 절단된 지름이 4 um의 공기구멍을 가지고 있으며 길이가 10 mm인 중공 광섬유로 구성되어 있다. 개발된 In-Line 마이켈슨 간섭계를 PZT위에 glue를 사용하여 고정시켜 In-Line 마이켈슨 간섭계형 전압 센서를 제작하였다. 제작된 센서는 60 Hz의 AC 전압을 인가하였을 때 출력파형의 주파수는 인가전압의 크기에 비례하였다. 그리고 출력파형의 위상은 인가전압의 크기와 거의 선형적인 관계에 있었으며 센서의 감도는 $0.065{\pi}$ radian/V였다.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.81-96
• /
• 2020

Wind measurements were made on the Canton Tower at a height of 461 m above ground during the Typhoon Vincente, the wind-induced accelerations and displacements of the tower were recorded as well. Comparisons of measured wind parameters at upper level of atmospheric boundary layer with those adopted in wind tunnel testing were presented. The measured turbulence intensity can be smaller than the design value, indicating that the wind tunnel testing may underestimate the crosswind structural responses for certain lock-in velocity range of vortex shedding. Analyses of peak factors and power spectral density for acceleration response shows that the crosswind responses are a combination of gust-induced buffeting and vortex-induced vibrations in the certain range of wind directions. The identified modal frequencies and mode shapes from acceleration data are found to be in good agreement with existing experimental results and the prediction from the finite element model. The damping ratios increase with amplitude of vibration or equivalently wind velocity which may be attributed to aerodynamic damping. In addition, the natural frequencies determined from the measured displacement are very close to those determined from the acceleration data for the first two modes. Finally, the relation between displacement responses and wind speed/direction was investigated.

• 지구물리와물리탐사
• /
• 제10권4호
• /
• pp.299-307
• /
• 2007

소채널 소구경 음파검층에서 정확한 속도분석을 하기 위한 연구의 일환으로 다채널 석유검층에서 많이 이용되고 있는 STC 방법을 물성을 달리하는 콘크리트 재질로 제작된 3개의 NX 모형공에서의 3 채널 음파검층에 적용해 보고 그 결과를 분석하였다. 자료취득에 이용한 음원의 주 주파수가 측정된 음파파형 및 진폭스펙트럼 그리고 속도분석기법으로서의 STC 특성에 미치는 영향을 비교 분석하였으며, 적절한 음원의 주 주파수의 선택과 셈블런스 투영을 포함한 STC 기법 적용으로 모드별 속도를 효과적으로 결정할 수 있음을 보였다. 이론적 모형 및 모형 시추공 시험자료를 이용한 STC 기법에 대한 연구 결과, 소구경 천부검층에서 4개의 수진기 조합이 가장 바람직한 것으로 나타났으며, 초동피킹 방법을 효과적으로 병행한다면 3개 수진기에서의 적용도 효과적일 수 있음을 보였다.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.1-7
• /
• 2011

Sound waves and acoustic energy generated by two identical TA (ThermoAcoustic) lasers were analyzed and studied. One end of the ceramic stack was heated by a thin NiCr wire wound around that end. The other end of the stack was cooled by natural convection of atmospheric air. The wavelength of the sound waves generated by a single TA laser was four times the tube length and the amplitude of the waves increased with the heating rate. SPL (SoundPressure Level) meters and microphones were employed to measure and study the sound waves at different distances from the glass tube opening and at the focusing point of the TA laser pair for different laser position arrangements. The sound waves of the two TA lasers at the focusing point were found to be almost 180 degrees out of phase when the openings of the two lasers were very close to each other and the angle between the laser axes was small. When the two TA lasers were placed far apart, the sound wave amplitudes and the phase difference between the two laser outputs varied periodically with time. The frequencies of the sound waves changed when the openings of the two TA lasers were in close vicinity and the angle between the laser axes exceeded a certain value. In this case, the glass tube opening was no longer a pressure anti-node and the wavelength of the fundamental mode was not equal to four times the tube length.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.889-913
• /
• 2015

Structural vibration characteristics of a semi-active base-isolated building were investigated using seismic observation records including those of the 2011 Great East Japan earthquake (Tohoku earthquake). Three different types of analyses were conducted. First, we investigated the long-term changes in the natural frequencies and damping factors by using an ARX model and confirmed that the natural frequency of the superstructure decreased slightly after the main shock of the Tohoku earthquake. Second, we investigated short-term changes in the natural frequencies and damping factors during the main shock by using the N4SID method and observed different transition characteristics between the first and second modes. In the second mode, in which the superstructure response is most significant, the natural frequency changed depending on the response amplitude. In addition, at the beginning of the ground motion, the identified first natural frequency was high possibly as a result of sliding friction. Third, we compared the natural frequencies and damping factors between the conditions of a properly functional semi-active control system and a nonfunctional system, by using the records of the aftershocks of the Tohoku earthquake. However, we could not detect major differences because the response was probably influenced by sliding friction, which had a more significant effect on damping characteristics than did the semi-active dampers.