• 한국정보통신학회논문지
• /
• 제23권6호
• /
• pp.726-732
• /
• 2019

본 연구에서는 차동 구조의 고주파 증폭기를 위한 비대칭 차동 인덕터를 제안하였다. 제안 된 비대칭 차동 인덕터는 증폭기 내 차동 신호 간 위상 오차를 완화하기 위한 것으로서, 차동 인덕터에 형성되는 Center-tap의 위치를 조정하여, 전력 증폭기를 구성하는 구동 증폭기의 차동 신호에서 바라보이는 임피던스가 동일하게 형성 되도록 하였다. 이를 통하여 기존 차동 인덕터를 사용하는 경우 대비 AM-to-AM 및 AM-to-PM 왜곡이 완화됨을 확인 하였다. 제안하는 비대칭 차동 인덕터의 효용성을 확인하기 위하여 180-nm RFCMOS 공정을 이용하여 2.4-GHz CMOS 전력 증폭기를 설계하였으며, EVM 5% 기준 20 dB의 전력 이득과 17 dBm의 최대 선형 출력 전력을 얻었다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.91-97
• /
• 2018

본 논문은 VLC (Visible Light Communication)의 컬러그리드 기반 가시광 IoT 도어락 시스템의 구현 가능성을 제시한다. 이 논문에서 논의된 컬러그리드 기반의 VLC 변조 방식은 빛의 직진성과 빛의 특성 인 풍부한 주파수 자원을 이용한다. 이 시스템의 성능 결과는 비트 오류율 (BER) 및 신호 대 잡음비 (SNR) 시뮬레이션을 사용하는 기존 변조 방식과 비교한다. 채널 모델과 관련하여 제안된 혼합변조 방식은 NLOS (Non Line Of Sight)를 제외한 가장 가까운 LOS (Line Of Sight)를 선택한다. 이 논문의 실험은 실내 환경에서 Tx와 Rx 사이에서 3m의 거리에서 전력 dB을 변화시킴으로써 수신 된 심볼의 에러율을 보여준다. 성능 결과 및 실험을 통해 제안 된 컬러그리드 기반 변조 방식의 우수성을 보인다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.491-500
• /
• 2020

The present study proposes a time domain model for the Vortex-induced Vibration (VIV) simulation of a catenary riser under the combination of the current and oscillatory flow induced by vessel motion. In this model, the hydrodynamic force of VIV comprises excitation force, hydrodynamic damping and added mass, which are taken as functions of the non-dimensional frequency and amplitude ratio. The non-dimensional frequency is related with the response frequency, natural frequency, lock-in range and the fluid velocity. The relatively oscillatory flow induced by vessel motion is taken into account in the fluid velocity. Considering that the added mass coefficient and the non-dimensional frequency can affect each other, an iterative analysis is conducted at each time step to update the added mass coefficient and the natural frequency. This model is in detail validated against the published test models. The results show that the model can reasonably reflect the effect of the added mass coefficient on the VIV, and can well predict the riser's VIV under stationary and oscillatory flow induced by vessel motion. Based on the model, this study carries out the VIV simulation of a catenary riser with harmonic vessel motion. By analyzing the bending moment near the touchdown point, it is found that under the combination of the ocean current and oscillatory flow the vessel motion may decrease the VIV response, while increase the excited frequencies. In addition, the decreasing rate of the VIV under vessel surge is larger than that under vessel heave at small vessel motion velocity, while the situation becomes opposite at large vessel motion velocity.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.213-225
• /
• 2020

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

• 융합정보논문지
• /
• 제11권3호
• /
• pp.132-139
• /
• 2021

고감쇠 차량이 둔턱(bumped barrier)을 넘어갈 때 발생하는 강제 진동의 응답 특성이 연구되었고, 이와 관련하여 특히 강제 진동 차량에서 변위, 속도 및 가속도의 응답 거동을 분석하였다. 또한, 각각의 응답을 얻기 위해 Runge-Kutta-Gill의 수치해석법을 수행하여 시간영역의 분석을 하였다. 강제 진동 모델의 여러 고감쇠 조건으로 응답 특성을 얻을 수 있었고 질량, 감쇠 및 강성을 달리하여 수치 분석 후, 임펄스 충격력으로 차체에 가해지는 모델을 고려하여 강제력에 의한 차량 모델의 응답 특성을 얻었고 실험 결과와 비교하여 그 모델의 타당성을 밝혔다. 진폭 및 차량의 고유진동수도 고려하여 분석하였고 차량 모델의 나이키스트 선도를 구하여 고감쇠의 정도에 따라 특성을 분석할 수 있었다. 상이한 질량, 감쇠 및 강성에 따라 임펄스 충격력에 의한 강제 진동 응답 특성을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.1-16
• /
• 2022

This work elaborately investigates the influences of the guideway geometry parameters and track irregularity on the dynamic performances of the suspended monorail vehicle-guideway system (SMVGS). Firstly, a spatial dynamic analysis model of the SMVGS is established by adopting ANSYS parameter design language. Then, the dynamic interaction between a vehicle with maximum design load and guideway is investigated by numerical simulation and field tests, revealing the vehicle-guideway dynamic features. Subsequently, the influences of the guideway geometry parameters and track irregularity on the dynamic performances of the SMVGS are analyzed and discussed in detail, and the reasonable ranges of several key geometry parameters of the guideway are also obtained. Results show that the vehicle-guideway dynamic responses change nonlinearly with an increase of the guideway span, and especially the guideway dynamic performances can be effectively improved by reducing the guideway span; based on a comprehensive consideration of all performance indices of the SMVGS, the deflection-span ratio of the suspended monorail guideway is finally recommended to be 1/1054~1/868. The train load could cause a large bending deformation of the pier, which would intensify the car-body lateral displacement and decrease the vehicle riding comfort; to well limit the bending deformation of the pier, its cross-section dimension is suggested to be more than 0.8 m×0.8 m. The addition of the track irregularity amplitude has small influences on the displacements and stress of the guideway; however, it would significantly increase the vehicle-guideway vibrations and rate of load reduction of the driving tyre.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.86-94
• /
• 2023

본 연구에서는 강재 슬릿댐퍼를 대상으로 하여 면외 변형을 구속할 수 있는 보완상세를 제시하고, 제안상세 적용 유무와 댐퍼의 형상비를 변수로 하여 일정진폭 가력실험을 수행하였다. 실험결과에 따라 제안상세가 적용된 슬릿댐퍼의 반복이력은 설정된 변수 범위에서 모두 안정적인 방추형의 이력거동을 나타내었으며 종국거동까지 댐퍼의 면외변형은 관찰되지 않았다. 누적변형각 분석을 통해 제안상세가 적용된 댐퍼 시스템은 대조군에 비해 월등히 큰 소성변형능력을 확보할 수 있음을 확인하였다. 이러한 구조적 효과(구속패널효과)는 슬릿댐퍼의 형상비가 작을수록 크게 나타났다. 관련 국외기준을 참고하여 제안상세 적용유무에 따른 슬릿댐퍼의 피로곡선을 작성하고 예측곡선 제시를 위한 매개변수를 도출하였다. 본 연구의 결과를 토대로 향 후 다양한 종류의 제진장치의 구조성능에 대한 정량적인 비교가 가능할 것으로 판단된다.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.129-138
• /
• 2023

The proportion of agricultural products handled through the Agricultural Products Processing Center (APC) is also steadily increasing every year, and in the case of Seongju Korean melon, a total of 10 APCs of Nonghyup and farming association corporations are in operation, and the distribution ratio is about 60% based on total production. In this study, Seongju Korean melon was selected as a target to analyze the environment load during carrying (production farm ~ APC) in the production area and the transport environment load during distribution of domestic fruits, and to analyze the environmental load for handling at APC. The vertical average vibration intensity (overall G_rms of 1~250 Hz) of truck transport measured at three transport routes from Seongju Korean melon producer ~ APC, Seongju ~ Seoul and Seongju ~ Jeju was about three times larger than that in the lateral direction and 4.5 times larger than that in the longitudinal direction, respectively. The frequency of occurrence of high-amplitude events (G) in the vertical direction compared to the measuring time was deeply related to pavement conditions in the order of unpaved farm-roads, concretepaved farm-roads, and asphalt-paved main-roads, but overall G_rms for the entire frequency band is believed to have a greater impact on vehicle traveling speed than road conditions. On the other hand, the difference in the size and direction of the vibration intensity measured by the forklift truck's main-body and the attachment (fork carrier) during handling at Seongju Korean melon APC was clear, and the vibration intensity of the forklift truck's main-body was largely affected by the stiffness of the fork and the mast according to the handling weight. Based on the field-data of the transport environment during domestic distribution measured through this study, it is believed that it is possible to develop a lab-based simulation protocol for appropriate packaging design.

• Structural Engineering and Mechanics
• /
• 제87권6호
• /
• pp.529-540
• /
• 2023

A novel laminated-hybrid-composite-beam (LHCB) of glass-epoxy infused with flyash and graphene is constructed for this study. The conventional mixture-rule and constitutive-relationship are modified to incorporate filler and lamina orientation. Eringen's non-local-theory is used to include the filler effect. Hamilton's principle based on fifth-order-layer-wise-shear-deformation-theory is applied to formulate the equation of motion. The analogous shear-spring-models for LHCB with multiple-cracks are employed in finite-element-analysis (FEA). Modal-experimentations are conducted (B&K-analyser) and the findings are compared with theoretical and FEA results. In terms of dimensionless relative-natural-frequencies (RNF), the dynamic-response in cantilevered support is investigated for various relative-crack-severities (RCSs) and relative-crack-positions (RCPs). The increase of RCS increases local-flexibility in LHCB thus reductions in RNFs are observed. RCP is found to play an important role, cracks present near the end-support cause an abrupt drop in RNFs. Further, multiple cracks are observed to enhance the nonlinearity of LHCB strength. Introduction of the first to third crack in an intact LHCB results drop of RNFs by 8%, 10%, and 11.5% correspondingly. Also, it is demonstrated that the RNF varies because of the lamina-orientation, and filler addition. For 0° lamina-orientation the RNF is maximum. Similarly, it is studied that the addition of graphene reduces weight and increases the stiffness of LHCB in contrast to the addition of flyash. Additionally, the response of LHCB to moving mass is accessed by appropriately modifying the numerical programs, and it is noted that the successive introduction of the first to ninth crack results in an approximately 40% to 120% increase in the dynamic-amplitude-ratio.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.151-157
• /
• 2022

차량의 진행을 근사화한 외부 가진력을 고려한 강제 진동에서의 주파수 특성을 알아보고자 하였고, 다양한 가진 진폭과 주파수를 갖는 외력이 작용하면서 차량이 둔턱을 넘어갈 때에 차량에서 일어나는 주파수 영역의 진동특성을 분석하였다. 응답은 수치해석을 통하여 변위, 속도 및 가속도 등의 응답을 구하였고 이들을 FFT 처리하여 각 시간 응답의 FRF(Frequency response function) 주파수 특성을 분석하였다. 특히, 차량 고유모드와 외부 가진 모드의 발생 위치를 확실하게 비교하여 밝혔고 외부 가진력에 의한 강제진동 모델에서 변위, 속도 및 가속도의 거동과 주파수 응답함수에서의 고유모드의 위치와 주변의 가진 모드 분포 및 파워 스펙트럼, 실수부와 허수부의 FRF도 나타났으며 각 FRF에서 근접 모드 특성도 분석하였다. 외부 가진력으로 정현파의 가진력과 임펄스 가진력에 의한 둔턱 주파수를 고려하여 가정한 근사 모델에서 발생 모드를 구별할 수 있었다. 상당하는 질량, 감쇠 및 강성을 변화하는 여러 시스템에서 강제진동의 응답특성을 체계적으로 다루었다.