• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2783-2785
• /
• 2003

In multi-dimensional magnetic resonance imaging, data is obtained in the spatial frequency domain. Since the signal variation in the spatial frequency domain is much larger than that in the spatial domain, analog-to-digital converts with wide conversion bits are required. In this paper, the quantization noise in magnetic resonance imaging is analyzed. The signal-to-quantization noise ratio(SQNR) in the reconstructed image is derived from the level of quantization in the data acquisition. Since the quantization noise is proportional to the signal amplitude, it becomes more dominant in high field imaging. Using the derived formula the SQNR for several MRI systems are evaluated, and it is shown that the quantization noise can be a limiting factor in high field imaging, especially in three dimensional imaging in magnetic resonance imaging.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.570-572
• /
• 2008

The modulation quality of the I/Q modulator in a wireless transmitter usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the third order intermodulation($IM_3$) signal and the error components such as an input amplitude error and a local phase error, respectively. This paper focused on how much the Single Sideband Ratio(SSR), which indicates the signal distortion, changes according to the variation of the error components. Consequently, since a desired signal, side band signal at the I/Q modulator output are also represented with those power series coefficients and the error components, the effects of the error components on SSR to meet the EVM specification of the WPAN can be clearly analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.870-874
• /
• 2004

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by Piezoelectric impedance-based technique associated with longitudinal wave propagation method. The bolt fastening condition is adjusted by torque wrench. In order to estimate the damage condition numerically, three damage indices, impedance peak frequency shift ${\Delta}F$, peak amplitude ratio $\delta$ and quality factor ratio $\gamma$, are proposed in this paper. Furthermore, an assessment method is described for estimation of the damage by using these three damage indices.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.527-534
• /
• 2021

The demand for sustainable extraction of bioactive compounds from food matrices has been increasing. Water extraction of anthocyanins in aronia was investigated using conventional and ultrasonic-assisted methods. The optimum extraction conditions for the conventional method included a sample-to-water ratio of 1:40 g/mL, extraction temperature 71℃, and extraction time of 39 min. The optimized conditions for ultrasonic-assisted extraction were a sample-to-water ratio of 1:40 g/mL, extraction temperature 80℃, extraction time of 20 min, and an amplitude of 87.2 ㎛. The anthocyanin contents of the two extracts were 155.32 and 158.02 mg/100 g fresh weight, respectively. The major anthocyanins were cyanidin 3-galactoside (65% of the total) and cyanidin 3-arabinoside (30% of the total). The contents of individual anthocyanins and phenolic acids were not significantly different between the two optimized extracts.

• Communications for Statistical Applications and Methods
• /
• v.30 no.3
• /
• pp.311-330
• /
• 2023

The present work describes simulation studies to compare the performances in terms of averaged mean squared error of bayesian wavelet shrinkage methods in estimating component curves from aggregated functional data. Five bayesian methods available in the literature were considered to be compared in the studies: The shrinkage rule under logistic prior, shrinkage rule under beta prior, large posterior mode (LPM) method, amplitude-scale invariant Bayes estimator (ABE) and Bayesian adaptive multiresolution smoother (BAMS). The so called Donoho-Johnstone test functions, logit and SpaHet functions were considered as component functions and the scenarios were defined according to different values of sample size and signal to noise ratio in the datasets. It was observed that the signal to noise ratio of the data had impact on the performances of the methods. An application of the methodology and the results to the tecator dataset is also done.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.38-46
• /
• 1994

The vibration amplitude of boring bar is generally large at the tool tip, because it has the high length-diameter(L/D) ratio. A new dynamic cutting force model is presented by considering the change of shear angle under dynamic cutting. The boring bar is modelled as a cantilever with dynamic force acting at the tool end point. Based on this realistic continuous system model, the equation of motion of borring bar is solved by numerical computations. A good agreement is found between the proposed model and the experimental results.

• Steel and Composite Structures
• /
• v.51 no.4
• /
• pp.407-416
• /
• 2024

The main objective of the present paper is to investigate the nonlinear vibration of buckled beams fixed at both ends and made of Aluminium allay (Al-alloy) reinforced with randomly dispersed Single Walled Carbon Nanotube (SWNT). The Mori-Tanak (M-T) micromechanical approach is selected to predict the homogenized material properties of the beams. The differential equation of motion governing the nonlinear behavior of the Euler-Bernoulli homogeneous beam is solved using an analytical method. The influences of diverse parameters including axial load, vibration amplitude, SWNT volume fraction, SWNT aspect ratio and beam slenderness ratio on the nonlinear frequency are studied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.285-292
• /
• 2001

In this paper, the analysis model of a composite electromagnetic interference environment is proposed, and the composite interference consists of three types, i.e., impulse, sinusoidal, and rectangular type. Also, we have derived the p.d.f of the amplitude of the composite interference. And using a derived p.d.f, we have evaluated the performance of 16QAM (Quadrature Amplitude Modulation) system in a composite electromagnetic interference environment. From the results, it is known that when impulse type interference is weaker than the others, the shape of p.d.f is dominantly governed by the power component ratio of sinusoidal and rectangular type interference. On the other hand, when impulse type interference is stronger, the effect of the other two interference becomes insignificant. Also, It is shown that the smaller both impulsive index (A) and the mean power component ratio ($\Gamma$') in impulse type interference are, the worse the performance of 16QAM system is.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.11-25
• /
• 2018

Both the propagation velocity and the direction of atmospheric waves are important factors for analyzing and forecasting meteo-tsunami. In this study, a total of 14 events of meteo-tsunami over 11 years (2006-2016) are selected through analyzing sea-level data observed from tidal stations along the west coast of the Korean peninsula. The propagation velocity and direction are calculated by tracing the atmospheric disturbance of each meteo-tsunami event predicted by the WRF model. Then, the Froude number is calculated using the propagation velocity of atmospheric waves and oceanic long waves from bathymetry data. To derive the critical condition for the occurrence of meteo-tsunami, supervised learning using a logistic regression algorithm is conducted. It is concluded that the threshold distance of meteo-tsunami occurrence, from a propagation direction, can be calculated by the amplitude of air-pressure tendency and the resonance factor, which are found using the Froude number. According to the critical condition, the distance increases logarithmically with the ratio of the amplitude of air-pressure tendency and the square of the resonance factor, and meteo-tsunami do not occur when the ratio is less than 5.11 hPa/10 min.

• Korean Journal of Food Science and Technology
• /
• v.50 no.5
• /
• pp.474-479
• /
• 2018

In this study, ultrasound-assisted extraction conditions of total anthocyanins and total phenolic compounds from Campbell early grape (Vitis labruscana) were optimized via response surface methodology using a Box-Behnken design. Three independent variables, including solid-liquid ratio (1/30-1/50 g/mL), extraction time (2-10 min), and amplitude (20-100%), significantly affected total anthocyanin content. However, no significant effect of these variables was observed in the total phenolic compound content. The optimized extraction conditions were solid-liquid ratio of 1/48.13 g/mL, extraction time of 2 min, and amplitude of 20%. Under these conditions, the predicted values of total anthocyanins and total phenolic compounds were 94.96 and 1,661.16 mg/100 g dry weight (DW), respectively. The experimental values of total anthocyanins and total phenolic compounds were 88.25 and 1,554.37 mg/100 g DW, respectively, which is well matched with the predicted values within 7.5% difference.