• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.357-359
• /
• 2009

In this paper, the 2.4GHz doppler radar system consisting of the doppler radar module and a baseband module were designed to detect heartbeat and respiration signal without direct skin contact. A bio-radar system emits continuous RF signal of 2.4GHz toward human chest, and then detects the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from quadrature signal of the doppler radar system are applied to the pre-processing circuit, amplification circuit, and the offset circuit of the baseband module. ECG(electrocardiogram) and reference respiration signals are measured simultaneously to evaluate the doppler radar system. As a result, the respiration signal of doppler radar signal is detected to 1m without complex digital signal processing. The sensitivity and calculated from I/Q respiration signal were $98.29{\pm}1.79%$, $97.11{\pm}2.75%$, respectively, and positive predictivity were $98.11{\pm}1.45%$, $92.21{\pm}10.92%$, respectively. The sensitivity and positive predictivity calculated from phase and magnitude of the doppler radar were $95.17{\pm}5.33%$, $94.99{\pm}5.43%$, respectively. In this paper, we confirmed that noncontact real-time heartbeat and respiration detection using the doppler radar system has the possibility and limitation.

• 전자공학회논문지SC
• /
• 제43권4호
• /
• pp.53-59
• /
• 2006

본 논문에서는 새로운 정밀 계측기용 전파 정류 회로를 제안하고 설계하여, 칩으로 구현 후 검증한 것에 대해 기술하였다. 기존의 회로는 회로가 복잡하고, 신호의 출력범위가 공통모드 (VDD/2) 전압부터 제한된 크기의 출력 전압 까지만 동작하는 문제점이 있었다. 제안된 회로에서는 2개의 2x1 먹스, 1개의 차동 차이 증폭기, 1개의 고속비교기를 이용하여 간단하게 구현하였다. 특히 하나의 차동 차이 증폭기를 이용하여 입력된 신호를 접지(Ground) 레벨로 낮추는 기능과 2배 증폭 기능을 동시에 수행하게 함으로서 신호 전압 전 영역 (Vss 부터 전원 전압 VDD 까지)으로 동작하도록 설계하였다. 기존의 회로에 비해 50% 이상의 하드웨어 면적과 소모전력 감소 효과를 얻었다. 제안된 전파정류회로는 0.35 um 1-poly 2-metal 표준 CMOS 공정을 이용하여 구현하여 검증하였다. 칩 면적은 $150um{\times}450um$ 이며 전력 소모는 3.3V 전원 전압에서 840uW이다

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1201-1206
• /
• 2003

A measurement device for gas flow rate using hot-wire module is developed for the utilization in low-accuracy industrial applications. The module has three wires of measuring and heating, and a bridge circuit is installed to detect electric current through the wire in the module. An amplification of the signal and conversion to digital output are conducted for the online measurement with a personal computer. In addition, temperature distribution in the module is numerically analyzed to examine the measured outcome from the module experiment. The flow rate of air and carbon dioxide gas is separately measured for the performance examination of the device. The experimental relation of measurement and flow agrees with the prediction from the numerical analysis. The outcome of the performance test indicates that the accuracy and reproducibility of the module is satisfactory for the purpose of industrial applications.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.808-815
• /
• 2001

The three-phase diode rectifier with a capacitive filter is highly sensitive to line voltage unbalance, and may cause significantly unbalanced line currents even under slightly unbalanced voltage condition. This paper presents an analysis of this 'unbalance amplification' effect for an ideal rectifier circuit without ac-and dc-side inductors. The voltage unbalance is modeled by introducing a deviation voltage superimposed on balanced three-phase line voltages. With proper approximations, closed-form expressions for symmetrical components of the line current and current unbalance factor are derived in terms of the voltage unbalance factor, filter reactance, and load current. The validity of analytical predictions is confirmed by simulation.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.163-167
• /
• 2013

A modified two-point impedance spectroscopy technique exploits the geometric constriction between an electrolyte and a cathode with an emphasis on semispherical-shaped electrolytes. The spatial limitation in the electrolyte/electrode interface leads to local amplification of the electrochemical reaction occurring in the corresponding electrolyte/electrode region. The modified impedance spectroscopy was applied to electrical monitoring of a YSZ ($Y_2O_3$-stabilized $ZrO_2$)/SSC ($Sm_{0.5}Sr_{0.5}CoO_3$) system. The resolved bulk and interfacial component was numerically analyzed in combination with an equivalent circuit model. The effectiveness of the "spreading resistance" concept is validated by analysis of the electrode polarization in the cathode materials of solid oxide fuel cells.

• 센서학회지
• /
• 제3권1호
• /
• pp.54-60
• /
• 1994

본 논문에서는 멀티센서 신호처리용 집적회로를 구성하였다. 제안된 회로는 멀티센서 신호 선택을 위한 아날로그 멀티플렉서, 노이즈 제거와 신호증폭을 위한 능동 필터, 디지탈 신호처리부와의 인터페이스를 위한 샘플-홀드 회로 등으로 구성하였다. 이러한 기능회로들을 CMOS 트랜지스터로 설계하여 집적화를 가능케 하였으며, 이로 인해 멀티센서 신호처리 시스템의 저소비전력화, 소형화를 구현케하였다.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.418-424
• /
• 2014

A large number of wire rope has been used in various industries such as cranes and elevators. When wire used for a long time, wire defects occur such as disconnection and wear. It leads to an accident and damage to life and property. To prevent this accident, we proposed a wire rope fault detection system in this paper. We constructed the whole system choosing the leakage fault detection method using hall sensors and the method is simple and easy maintenance characteristics. Fault diagnosis and analysis were available through analog filter and amplification process. The amplified signal is transmitted to the computer through the data acquisition system. This signal could be obtained improved results through the digital filter process.

• 대한의용생체공학회:의공학회지
• /
• 제12권1호
• /
• pp.9-18
• /
• 1991

A micro- computer system has been designed to evaluate the performance of commercial infant incubator and to develope the temperature controller of new incubator. The measure- ment system used a hybrid of analog electronics for amplification, integration, and switches and micro-computer for data storage, data display, and control of relay. This approach has been applied to measure the warm-up time, temperature stability, open/close door and port- holes, and temperature distribution on the mattress. The micro-computer provides on-line ac cess of multi-point temperature data, simplifies the analog part of the circuit and gives the flexibility.

• 한국광학회지
• /
• 제8권6호
• /
• pp.471-475
• /
• 1997

본 논문에서는 에르븀 첨가 광섬유 증폭기를 이용하여 단일 채널을 증폭할 때의 이득 동특성(gain dynamics)과 다채널을 증폭할 때의 이득 동특성에 대해 논의하였다. 여러 개의 에르븀 첨가 광섬유 증폭기가 연결된 증폭기 체인에서 채널 수의 변화에 의해 입력 광파워가 변할 때의 출력 광파워의 과도 현상(power transients)을 측정하고, 이를 $\mu\textrm{s}$ 이하의 응답 시간을 갖는 펌프 광파워 조절 회로를 이용하여 억제하였다.

• 전기의세계
• /
• 제18권5호
• /
• pp.12-19
• /
• 1969

The sensitivity of transistorized d.c. amplifiers is mainly limited by drift at operating point caused by ambient temperature changes. A chopper-type transistorized amplifier is necessary to obtain a high sensitivity without recourse to drift compensation which requires the adjustment of several balancing controls. A chopper-stabilized system consisting of an electro-mechanical chopper for input and output and a high-gain a.c. amplifier is designed and analyzed. The gain of the a.c. amplifier, expressed as the ratio of voltages, is larger than 80db in the band of 50C/S - 100KC/S. The complete system gives an open-loop gain of 68db at direct current. The offset voltage is 20.mu.V referred in input and the voltage drift at the input is less than 10.mu.V/hr at 25.deg.C. This type of amplifier would be useful for the high-gain transistorized d.c. amplifier for analog computers. Also, due to the high input impedance, it is suitable for amplification of signals from wide range of source impedances.