• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.492-496
• /
• 2004

When using a conventional power factor correction circuit, a comparatively huge capacitor is used to boost-up output voltage. It has a large amount of harmonic distortion in the input current waveform. To improve the input current waveform of diode rectifiers, we propose a new operating principle for the power factor correction circuit. Due to the fact that the proposed circuit uses smaller ones and a smaller reactor, the output voltage increases and obtains higher input current waveforms. These are suitable for the harmonics guidelines. The proposed circuit is able to obtain higher power factor and efficiency. Also, it has reduced switching loss and held over-shooting by using an inverter of eliminated dead-time HPWM that has non-linear impedance circuits to make up diodes, capacitance and a reactor. We compared the conventional PWM inverter and proposed HPWM inverters and found that a high input power factor of 97[%] and an efficiency of 98[%] were also obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.114-118
• /
• 2006

We investigated the transient electroluminescence (EL) and modulation characteristics of red organic light-emitting diodes (OLEDs), which consist with 4-(dicyanomethylene)-2-i -propyl-6-(1,1,7,7-tetramethyljulolidyl-9-cnyl)-4H-pyran (DCJTI) and rubrene doped into tris(8-hydroxyquinoline)aluminum ($Alq_3$). The transient EL waveforms showed two components, the overshooting peak and constant component, indicating that the excess amount of accumulated charges simultaneously recombine at the onset moment. This overshooting effect reduced the rise time of transient EL and enhanced the optical output of OLEDs when the pulse voltage applied to the device. We demonstrated that the red OLEDs could be use for the high-speed switching application by driving at more than 100 MHz and transmitting the video signals utilized as the electro-optical conversion device

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.338-344
• /
• 2014

As the role of information collection becomes increasingly important in the enormous data environment, there is growing demand for more intelligent information technologies for managing complex data. On the other hand, it is difficult to find a solution because of the data complexity and big scaled amount. Accordingly, there is a need for a special intelligent knowledge base frame that can be operated by itself flexibly. In this paper, by adopting switching function for signal transmission in the synapse of the human brain, I/E selective activation based knowledge reconfiguring mechanism is proposed for building more intelligent information management system. In particular, knowledge network design, a special knowledge node structure, Type definition, I/E gauge definition and I/E matching scheme are provided. Using these concepts, the proposed system makes the functions of activation by I/E Gauge, selection and reconfiguration. In a more efficient manner, the routing and reasoning process was performed based on the knowledge reconfiguration network. In the experiments, the process of selection by I/E matching, knowledge reconfiguration and routing & reasoning results are described.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.97-100
• /
• 1999

Mobile network applications are growing and this requires a fast and efficient transport method between the BS(Base Station) and the MSC(Mobile Switching Center). One possible solution is to use ATM and a voice CODEC standard which compresses 64kbps voice data to less than 8kbps. The low bit tate and small-sized packets made by the voice CODEC imply that significant amount of link bandwidth would be wasted, if this small-sized packet is carried by one ATM cell. The cell assembly delay increases if one ATM cell is fully filled with the small-sized packets. For the bandwidth-efficient transmission of low-rate, short, and variable length packets in delay sensitive applications, AAL-2 was standardized. This paper evaluates performance of AAL-2 by using voice CODEC standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.316-325
• /
• 2002

This paper investigates the restoration schemes which are applied to the MPLS domain upon a network failure. We define the following three restoration service models by combining the various restoration schemes: "FIS-based protection service" (FIS: failure indication signal), "inversion traffic protection service" and "1+1 protection service". After a qualitative analysis of the performance in them, we have analyzed it on quantitative basis by the simulation. According to the simulation results, "1+1 protection service" guarantees the fastest and most lossless restoration service among them; however, it results in consuming considerable bandwidth and producing an amount of control traffic, which means poor network utilization. On the other hand, "FIS-based protection service" spends less bandwidth and generates less control traffic, which means better network utilization, but produces poor restoration service. "Inversion traffic protection service" provides the medium restoration service and utilization between "1+1 protection service" and "FIS-based protection service."

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.35-44
• /
• 1994

In this paper, we propose a new modification method of the look-up table in self-organizing fuzzy control using look-up table. This method has the property that look-up table is modified to have fast response property. Its principle is that the controller forces the trajectory to go into the fast respose region which the error change amount is larger than the error at initial time whenever the reference or disturbance change. Also we introduce the variable learning speed coefficient which is proportional to distance from switching curve. And to demonstrate the applicability of the proposed method, we had simulation study for some examples and esecuted pole balance experiments with inverted pendulum.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.279-284
• /
• 2011

Harmonic distortions in current waveform may cause significant problems in electric power system facility and operation. This paper presents an adaptive parameter estimation method to detect harmonic current components caused by nonlinear loads. In addition, a coordination strategy for multiple inverter-interfaced distributed generators to compensate the harmonic currents is discussed. The coordination strategy is realized by distributing the harmonic compensation participation index to individual distributed generators. The harmonic compensation participation index can be determined by the amount of remaining power generation capacity of each distributed generator. Simulation results based on switching-level inverter models show that the proposed harmonic detection method has good performance and the coordination strategy can improve harmonic problems efficiently.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.501-517
• /
• 2016

Synchronized switch damping (SSD) is a structural vibration control technique in which a piezoelectric patch attached to or embedded into the structure is connected to or disconnected from the shunt circuit in order to dissipate the vibration energy of the host structure. The switching process is performed by a digital signal processor (DSP) which detects the displacement extrema and generates a command to operate the switch in synchronous with the structure motion. Recently, autonomous SSD techniques have emerged in which the work of DSP is taken up by a low pass filter, thus making the whole system autonomous or self-powered. The control performance of the previous autonomous SSD techniques heavily relied on the electrical quality factor of the shunt circuit which limited their damping performance. Thus in order to reduce the influence of the electrical quality factor on the damping performance, a new autonomous SSD technique is proposed in this paper in which a negative capacitor is used along with the inductor in the shunt circuit. Only a negative capacitor could also be used instead of inductor but it caused saturation of negative capacitor in the absence of an inductor due to high current generated during the switching process. The presence of inductor in the shunt circuit of negative capacitor limits the amount of current supplied by the negative capacitance, thus improving the damping performance. In order to judge the control performance of proposed autonomous SSDNCI, a comparison is made between the autonomous SSDI, autonomous SSDNC and autonomous SSDNCI techniques for the control of an aluminum cantilever beam subjected to both single mode and multimode excitation. A value of negative capacitance slightly greater than the piezoelectric patch capacitance gave the optimum damping results. Experiment results confirmed the effectiveness of the proposed autonomous SSDNCI technique as compared to the previous techniques. Some limitations and drawbacks of the proposed technique are also discussed.

• Journal of Hydrogen and New Energy
• /
• v.25 no.5
• /
• pp.509-515
• /
• 2014

At the fuel processing system (FPS) of fuel cell vehicle, hydrogen recirculation blower (HRB) is used for the recirculation of remained hydrogen after reaction. In this paper, noise and vibration improvement of HRB is studied by changing design and control. It is checked the campbell diagram and critical speed for stability of rotor, and housing stiffness is improved using simulation of frequency response function (FRF). A method is suggested that can decrease the unbalance amount of the rotor and impeller which main source of noise and vibration. In order to reduce the noise during deceleration of blower, electrical braking is applied and tested the risk impact of durability. Founded the optimum switching frequency of the motor control, and reduced the idle rpm by increasing of aerodynamic performance. The superiority of paper is proved by measurement of the improved product's noise and vibration.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.9-16
• /
• 2005

The growth of the Internet over the last several years has placed a tremendous strain on the high bandwidth Hence, the amount of internet traffic has risen sharply and it has demanded to use the limited resource. MPLS (Multiprotocol Label Switching) is regarded as a core technology for migrating to the next generation Internet. It is important to reduce the number of labels and LSP(Label Switched Path)s for network resource management. In this thesis, we considered an MPLS multicast mechanism in the current Internet. The scalability problem due to lack of labels and multicast property is one of the serious problems in MPLS multicast mechanism, we proposed a Label Aggregation algorithm that the multicast packets on same link in MPLS allocates the same label for the scalability problem. In order to support the proposed algorithm we defined a new LDP(Label Distribution Protocol) multicast field and multicast packet is copied and transmitted for multicast group links of next node in LSR(label Switch Router).