• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.861-864
• /
• 2011

Since national GHG reduction target by 2020 has been presented in Korea, the role of railroad has been reinforced within transport system due to the allocation of reduction target into sector. So, it is necessary to manage activity data systematically for the calculation of GHG emission in railroad. Now, the activity data of diesel consumption for NIR(National Inventory Report) are provided from oil supply and demand statistics. On the other hands, the activity data collected directly from railroad operating companies are used for GHG & Energy Target Management Act. This study aimed to assess the GHG emissions using two kinds of activity data related to the diesel consumption of railroad in 2009 and 2010. As a result, GHG emissions based on oil supply and demand statistics was 636 thousands ton $CO_{2e}$, but the activity data collected from railroad operating companies showed 649 thousands ton $CO_{2e}$ in 2009. Also, the gap of $CO_{2e}$ emission was increased in 2010. These trends were caused because oil supply and demand statistics included total diesel sales volume during 1 year and the activity data collected from railroad operating companies were the amount of diesel consumption only at railcar operation and maintenance step. In conclusion, it is important to develop the management and verification system of activity data with high reliability to substitute oil supply and demand statistics in railroad sector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.822-826
• /
• 2009

In case of engine room of ship, it uses type 2 ventilation system which supplies outside air forcibly by engine room ventilation fan, and naturally discharges air to outlet through low-pressed casing. The advantage of type 2 ventilation is that it makes inside with bi-pressure status to discharge contaminated materials to outside naturally. However, there is a phenomenon that pressure is greatly different between outside and inside due to huge amount of air supply by engine room ventilation fan. Therefore, we went aboard a container vessel which is on test run to analyze differential pressure with micronanometer by engine load and by combustion air supply method of engine. As a result, as engine load decreases (50, 75, 100%), the differential pressure between outside and inside tends to increase by 35% average, and the difference of pressure was 6.5 times maximum by combustion air supply method of engine.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1479-1484
• /
• 2014

This paper deals with regenerative energy in railway system which one of the largest customer in terms of load capability. Unlike the other loads of power system, loads of railway systems change in time and space. It has a characteristic amount of generating regenerative energy by frequent starting and braking in railway system. Therefore, it is expected higher utilization in railway system than the other systems. The purpose of DC power supply simulation is analyzing backed energy, regenerative energy by each railway vehicle and substation. In this paper, regenerative energy utilization are analyzed using DC power supply simulation and it is performed changing major influence on the design such as the number of installing absorber, internal resistance value, no-load voltage value at substation or operating parameters at regenerative energy utilization. After simulating, results are compared and analyzed.

• KDI Journal of Economic Policy
• /
• v.14 no.1
• /
• pp.89-119
• /
• 1992

This paper purports to analyze the economic rationale of compensating balance requirements and its impact on money supply. This practice has recently been severely criticized for artificially increasing the money supply and, therefore, limiting the nation's aggregate lending policy under the tight constraint of the given money supply target. A review of the existing literature implies that compensating balance requirements is a banking practice which leads to corrections in the distortion of financial resource allocation due to the imperfection of financial market stemming from asymmetric information and/or financial regulations on deposit and lending rates. Therefore, the economic rationale of this practice is deemed to improve the efficiency of financial resource allocation. On the other hand, the macroeconomic impact of compensating balance requirements on the money supply depends on the impact on the money multiplier, which in turn depends on the desired ratio of deposit that people wish to maintain on the money borrowed from the banking system, and on the desired reserve ratio that the banking system would like to hold for deposit withdrawal. If the compensating balance requirements could increase the desired ratio of deposit to borrowing (bank lending), it will increase the available amount of total reserve within the banking system and, in turn, the money multiplier. However, this channel has not been fully analyzed in the literature, and the direction of the effect is ambiguous. If the practice could reduce the turn-over rate of deposit and, thereby, reduce the desired reserve ratio of the banking system, then it will also increase the money multiplier. While this channel operates unambiguously toward increasing the money multiplier, this effect will be limited by the extent that the banking system holds the excess reserve over the required reserve because the excess reserve will set the maximum amount for the desired reserve to fall. This paper tries to determine the effect on the money supply by empirically estimating the multiplier and the desired ratio of deposit to lending equations as functions of the ratio of compensating balance to the related lending, which is not observable and is estimated for the regression purpose. The results suggest that the effect of compensating balance requirements on the money supply in Korea does not exist or is very tenuous even if it could operate. Therefore, this paper concludes that the well publicized policy of cross cancelling the compensating balance and the related lending will not be effective at controlling the money supply and increasing the amount of loans without expanding the money supply.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.1
• /
• pp.11-18
• /
• 2012

This study was investigated agricultural water supply system of major agricultural waterway for Gimje canal, Jeongeup canal, Dongjin river conduit of Dongjin river basin. Furthermore, this result will be used for water resources and agricultural demand in Saemangeum reclaimed arable land. Annual precipitation for 5 years in Dongjin river basin was 1,311.7mm. The average discharges in Dongjin river basin was $1,390{\times}10^6\;m^3$ and $1,516{\times}10^6\;m^3$ and $744{\times}10^6\;m^3$ for 2,007 and 2008, respectively. Also, annual average amount of water resources was 1,861${\times}10^6\;m^3$ and $2,279{\times}10^6\;m^3$ and $1,227{\times}10^6\;m^3$ for 2,007 and 2008, respectively. Dongjin river basin water system for the analysis of agricultural water in water resources, runoff, agricultural water demand and usage surveys were analyzed, resulting in the total amount of water due to precipitation of the watershed of the $12.3{\times}10^9\;m^3$ ~$22.8{\times}10^9\;m^3$ and Dongjin River basin in waters flowing discharge is $7.4{\times}10^9\;m^3$~$16.1{\times}10^9\;m^3$, agricultural water demand and usage of each of $6.8{\times}10^9\;m^3$~$6.9{\times}10^9\;m^3$ and $4.9{\times}10^9\;m^3$~$7.1{\times}10^9\;m^3$ compared to the agricultural water demand was more likely. Agricultural water supply system in Dongjin river basin is complex because of devided branches to the main canal and branch canal. In this process, accurately assessment of water usage is very difficult. Therefore, systematic management of water resources and supply of agricultural water supply system to use the terms of the complexity and diversity by considering the appropriate level of agricultural water management systems will be needed. As a result of this study, it can be used water resources assessment in quantity, rational usefulness and basic planning of water resources development for water distribution.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.171-179
• /
• 2010

Korea owns vast amount of apartment houses no less than those of world prominent countries, but did not pay enough efforts to maintain existing apartment houses and develop policies to reuse them due to growth driven policy of housing supply like construction of new houses. Korea constructed tremendous amount of houses in short period through government led forced house supplying policy, and resulted in excess houses such that present house supply rate happened to be reaching 110%. However, recently there are growing demand of change in housing policy due to social environmental changes like low birth rate and aging of society etc and nationals' demand for improvement of residential quality. When such social changes are demanded and 80% of apartment houses in Korea are less than 20 years old, renovations and remodeling of apartment houses are anticipated to emerge as important matter. In particular, the apartment houses in Seoul and the 1st generation new cities like Bundang and Ilsan etc have passed considerable period of time after construction and require safety measure, it is quite impending to loan programs for the maintenance of existing apartment houses. The objective of this study is to compare and analyze the system of loan programs about apartment houses of Japan, and then to propose to accelerate loan programs about maintenance for apartment houses in korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1629-1636
• /
• 2011

Global pork markets are becoming more competitive, riding the wind of the bilateral free trade agreement. China is the world's largest pork producer with nearly 50% of the world's total production. China's fast growing economy has provided its people with higher purchasing power, resulting in a rapid expansion of the Chinese swine industry over the past decades. Worldwide, China consumes the greatest amount of pork and it is believed that this trend will continue. Japan is the world's largest pork importing country, even though it also produces a lot of pork. The Japanese swine industry encounters weighty obstacles in production costs and environmental limitations which result in reduced domestic supply and creates the situation in which Japan has to import a significant amount of pork for their consumption. South Korea is also a large buyer of pork, with a status greatly influenced by the struggle that the country has faced with Foot and Mouth Disease (FMD) which occurred in 2000, 2002 and 2010. High production costs, low production efficiency, and forced culling following the FMD outbreak resulted in the loss of many hog farming households in the country, reducing supply of domestic pork in the face of continued demand. Overall, pork production in these economically important countries can greatly impact the industry globally. The goal of this review paper is to describe pork production in China, Japan, and South Korea and discuss these countries' role in global pork export markets.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.52-60
• /
• 2009

A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.293-305
• /
• 2011

A special concern is paid to the risks with which small-sized water resources systems are confronted in supplying water in the far future. Taking the Gwangdong dam reservoir as a case study, the authors seek to understand demand-side and supply-side disturbances of a reservoir, which, respectively, corresponds to effects of water demand changes on the intake amount and those of climate changes on the inflow amount. In result, it is demonstrated that both disturbances in the next 50 years are almost unpredictable. Yet the projection ranges, thought of as relatively reliable information that models offer, reveal that severity and period of water shortage is very likely to change. It is therefore concluded that water resources management requires more rigorous approaches to overcoming high uncertainties. The methods and models for projecting those disturbances are selected, based on practicality and applicability. Nevertheless, they show a large usefulness, especially in dealing with data shortage and reducing the needs for expensive modeling resources.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.485-493
• /
• 2016

Recently submarine and unmanned underwater vehicle (UUV) are equipped with a fuel cell system as an air independent propulsion system. Methanol fuel processor can efficiently supply the hydrogen to the fuel cell system to improve the ability to dive. This study investigated the optimal conditions of the methanol fuel processor that may be used in the closed environment. For this purpose, the numerical model based on Gibbs minimization equation was established for steam reformer and three exhaust gas burners. After simulating the characteristics of steam reformer according to the steam-to-carbon ratio (SCR) and the pressure change, the SCR condition was able to narrow down to 1.1 to 1.5. Considering water consumption and the amount of heat recovered from three burners, the optimum condition of the SCR can be determined to be 1.5. Nevertheless, the additional heat supply is required to satisfy the heat balance of the methanol fuel processor in the SCR=1.5. In other to obtain additional amount of heat, the combustion of methanol is better than the increased of SCR in terms of system design.