• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.3
• /
• pp.51-70
• /
• 2013

This paper develops a model to predict the adoption and level of usage of network technology in a two-level supply chain with buyer-supplier relationships. A firm's adoption of a new technology depends not only on its own beliefs of the new technology's costs and benefits, but also on the adoption decisions of other firms in the supply chain. A model first analyzes an individual supplier's decision about a new technology adoption considering with multiple suppliers and buyers. Individual suppliers' decisions are aggregated with a population model to project how new technology diffuses across the supply chain and examine the pattern of diffusion process. This study found that as more firms adopt in initial periods, the total amount of information to the potential adopters in the population increases, and then the number of firms persuaded by the information increases as the process moves up the distribution of adoption process. We consider three factors influencing the diffusion speed of the new technology in a supply chain network : mean benefits, cost sharing, and information provision. This study examines how such factors affect the reduction of threshold levels, which implies that reductions in threshold levels have an aggregate effect by accelerating the rate of adoption. In particular, we explore relationship factors available in practice in a buyer-supplier relationship and numerically examines how these relationship factors contribute to increase the diffusion speed of the technology in a two-level supply chain.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.481-490
• /
• 2010

Baekgog reservoir is located in Jincheon county, Chungbuk province, of which full water levels will be heightened from EL. 100.1 m to EL. 102.1 m, and total storages from 21.75 $Mm^3$ to 26.67 $Mm^3$. The simulation for reservoir inflow was conducted by DAWAST model. The annual average irrigation water was estimated to 33.19 $Mm^3$ supplied to 2,975 ha and the instream flows could be allocated with 0.14 mm/d from October to April with annual average of 2.52 $Mm^3$. The operation rule curve was drawn using inflow, irrigation, and instream flow requirements data. The reservoir water storage was simulated on a daily basis in case of both normal and withdrawal limit operation. In case of normal operation, the annual average irrigation water supply increased from 31.95 $Mm^3$ to 33.32 $Mm^3$, the instream water supply from 2.40 $Mm^3$ to 2.44 $Mm^3$, the water storages from 15.74 $Mm^3$ to 19.88 $Mm^3$, and the water supply reliability from 77.3 % to 81.6 %. In case of operation with withdrawal limit, the amount of instream water supply was 2.52 $Mm^3$ from reservoir regardless of the condition while the water storage increased from 16.77 $Mm^3$ to 20.65 $Mm^3$. The irrigation water supply capacity was appropriate for the case of normal operation with 2 m heightened condition. The present instream water supply capacity was 35,000 $m^3$/d (6.86 $Mm^3$/y) while 42,000 $m^3$/d (8.36 $Mm^3$/y) in 2 m heightened condition in case of withdrawal limit operation.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.26-32
• /
• 2020

In this study, a facility was constructed to supply liquid nitrogen to simulate combustion instability in a liquid rocket combustor. The pressurization and supply performances were predicted and verified through different experiments. The liquid nitrogen supply system was composed of a pressurized supply system, and a dome regulator was used to adjust the pressure of the pressurant. A cavitation venturi was used to control the mass flow rate of liquid nitrogen. The condition of liquid nitrogen supply was a mass flow rate of 2.55 kg/s and the venturi inlet pressure was above 100 bar. Based on the initial experiment, it was observed that the predicted amount of the pressurant was not sufficiently supplied and the target pressure was not supplied due to a drop in tank pressure. Through the modification of the established facilities, the target mass flow rate was successfully supplied and the cryogenic liquid nitrogen supply facility was verified.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.469-481
• /
• 2019

In addition to structural stabilization measures such as the construction of Sand Dam, non-structural management measures such as reasonable water demand and supply volume management are needed to prevent limited water supply damage due to drought. In this study, water supply-demand monitoring system was established for drought response in Seosang-ri basin in Chuncheon, the main source of domestic water for small water facilities. The flow rate of the stream was measured for monitoring the supply volume, and the daily flow rate was calculated by using it to calibrate the parameters of the SWAT (Soil and Water Assessment Tool). To monitor demand, the daily usage was calculated by measuring the change in the water level of the water tank. The relationship between the finally calculated daily supply and demand amount was analyzed to identify the shortage of water.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.765-774
• /
• 2000

The purpose of this study are to develop a realistic methodology to estimate agricultural water supply for rice paddy fields from reservoirs, pumping stations, intake structures, and tube wells on river basin scale. Agricultural water supply from irrigation reservoirs are estimated using the daily or ten day's storage rate data and DIROMmaily Inigation Reservoir Operation Model) model. Estimation of daily water supply from pumping station are carried out from the annual water use with typical water supply patterns. The daily groundwater withdrawn are investigated from the gross water requirement for rice and the design capacity of tube well. And, the daily intake discharge are estimated the minimum amount from the gross water requirement, stream discharge, and the design capacity. During 1993 to 1997, the annual water supply for irrigation in the Han river basin ranged from 569 to 709 million $\textrm{m}^3/yr$, and the mean was estimated to be 640 million $\textrm{m}^3/yr$.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.447-456
• /
• 2023

Cabbage, which is one of the main materials of kimchi, normally has an unstable supply due to cultivation and climate conditions. This unstable supply negatively affects the profitability of kimchi processors in Korea. Thus, kimchi processors found a better method for acquiring a consistent cabbage supply with long-term storage of over 3 months. However, a consensus regarding the best method for the stable and economical acquisition of cabbage remains controversial. This study aimed to analyze the current issue concerning cabbage acquisition by kimchi processors and evaluate the economic feasibility of kimchi storage. Findings obtained through survey and economic analyses using theoretical methodology were as follows: First, A survey conducted on kimchi processors in Korea revealed that even though they recognize the importance of kimchi storage, they struggle to store adequate amounts of cabbage. This is particularly evident with summer cabbage, which experiences the highest supply volatility and thus requires greater attention from kimchi processors in terms of storage. Second, the price analyses using the coefficient of variation show that cabbage in Korea has a high level of price instability, which suggests more storage of cabbage. Third, the evaluation of the economic feasibility of cabbage storage indicated that kimchi processors should consider storing a greater amount of cabbage, particularly during the summer season. This approach can help reduce the overall cost associated with kimchi processing.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.193-200
• /
• 2004

In this study, we propose a small high voltage power supply, which uses a half-bridge ZCS resonant and Cockroft-Walton circuit as its ESP (Electrostatic Precipitator). This power supply transfers energy from the ZCS resonant inverter to the step-up transformer. The transformer secondary is then applied to the Cockroft-Walton circuit for generating high voltage as a discharging source of electrodes. It is highly efficient because its amount of switching losses are reduced by virtue of the current resonant half-bridge inverter, and also due to the small size, low parasitic capacitance in the transformer stage owing to the low number of winding turns of the step up transformer secondary combined with the Cockroft-Walton circuit. Using this power supply, experiments have been carried out as a function of the switching frequency and duty ratio in order to investigate the smoke removal characteristics. From these results, the best operational condition is obtained at the switching frequency of 9 kHz and the duty ratio of 50% in this ESP.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1318-1321
• /
• 2005

As recently raw water quality has been polluted as well as its quality has been remarkably varied according to season and region, the precise control of coagulant dosage is being keenly required in water treatment plants. The amount of coagulant is closely related to raw water quality such as turbidity, alkalinity, water temperature, pH, electrical conductivity, etc. Since the optimum quantity of chemicals is not yet finalized, so dosage rate must be decided by using jar test that takes one or two hours. Hereupon, the output signal of stream current and multi-regression on historical data were proposed to be applied to the coagulant dosing control. In consequence of applying the scheme to automatic determination of the dosage rate, it was testified that the determination of dosage rate was very effective in case it is performed as to real-time sensing of water quality and the output signal of stream current.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.5
• /
• pp.381-388
• /
• 2018

Microbubbles oxygen transfer to water was simulated based on experimental results obtained from the bubbles generation operated under varying liquid supply velocity to the multi-step orifices of the generator. It had been known that liquid supply velocity and bubble size are inversely related. In the oxygen transfer, a non-steady state was assumed and the pseudo stagnation caused the slow movement of bubbles from the bottom to the water surface. Two parameters were considered for the simulation: They represent a factor to correct the pseudo stagnation state and a scale which represented the amount of bubbles in supply versus time. The sum of absolute error determined by fitting regression to the experimental results was comparable to that of the American Society of Civil Engineers (ASCE) model, which is based on concentration differential as the driving force. Hence, considering the bubbles formation factors, the simulation process has the potential to be easily used for applications by introducing two parameters in the assumptions. Compared with the ASCE model, the simulation method reproduced the experimental results well by detailed conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.455-460
• /
• 2012

The Electrostatic Inkjet system has many applications in cost and time effective manufacturing of printed electronics like RFIDs, OLEDs and flexible displays etc. This paper presents pneumatic ink supply system for an electrohydrodynamic deposition (EHD) setup for the precise pressure control to produce a small amount of discharge at the end of the capillary. The meniscus shape depends upon the applied pneumatic pressure to the ink supply system. Furthermore, this paper also compares meniscus shapes at different applied pneumatic pressures. It is concluded that patterning of constant line-width can be achieved better by controlling the meniscus shape using this technique.